Hearing protectors - General requirements - Part 1: Earmuffs

This document specifies requirements for construction, design, performance, marking and user information for earmuffs.
In particular, it specifies requirements regarding the sound attenuation of the earmuffs, measured in accordance with EN ISO 4869-1:2018.
The document does not apply to earmuffs outside the size range of headsizes as defined in this standard.
This document does not apply to earmuffs for attachment to head protection and/or face protection devices.
Ergonomic aspects are addressed by taking into account, within the requirements, the interaction between the user, the device and where possible the working environment in which the device is likely to be used (see Annex ZA and EN 458).

Gehörschützer - Allgemeine Anforderungen - Teil 1: Kapselgehörschützer

Dieses Dokument legt Anforderungen hinsichtlich Konstruktion, Gestaltung, Leistung, Kennzeichnung und Benutzerinformation für Kapselgehörschützer fest.
Im Besonderen legt es Anforderungen bezüglich der Schalldämmung der Kapselgehörschützer fest, gemessen in Übereinstimmung mit EN ISO 4869 1:2018.
Dieses Dokument ist nicht anzuwenden für Kapselgehörschützer außerhalb des in diesem Dokument definierten Bereichs von Kopfgrößen.
Dieses Dokument ist nicht anzuwenden für Kapselgehörschützer zur Befestigung an Kopfschutz und/oder Gesichtsschutzeinrichtungen.
Ergonomische Aspekte werden innerhalb der Anforderungen durch die Einbeziehung der Wechselwirkung zwischen dem Gehörschutzbenutzer, dem Gehörschutz und, wo möglich, der Arbeitsumgebung, in dem der Gehörschutz wahrscheinlich benutzt wird, berücksichtigt (siehe Anhang ZA und EN 458).

Protecteurs individuels contre le bruit - Exigences générales - Partie 1 : Serre-tête

Le présent document spécifie les exigences en matière de construction, de conception, de performances et de marquage des serre-tête ainsi que les informations destinées à l'utilisateur.
Il spécifie en particulier les exigences relatives à la déclaration de l'affaiblissement acoustique des serre-tête, mesuré conformément à l'EN ISO 4869-1:2018.
Le présent document ne s'applique pas aux serre-tête dont la taille n'appartient pas à la gamme de tailles définie dans la présente norme.
Le présent document ne s'applique pas aux serre-tête destinés à être montés sur des dispositifs de protection de la tête et/ou du visage.
Dans les exigences spécifiées, les aspects ergonomiques sont abordés par la prise en compte de l'interaction entre l'utilisateur, l'équipement et, quand cela est possible, l'environnement de travail dans lequel l'équipement est susceptible d'être utilisé (voir l'Annexe ZA et l'EN 458).

Varovala sluha - Splošne zahteve - 1. del: Naušniki

General Information

Status
Published
Publication Date
17-Nov-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Nov-2020
Due Date
29-Aug-2020
Completion Date
18-Nov-2020

Relations

Buy Standard

Standard
EN 352-1:2021
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 352-1:2018
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 352-1:2021
01-april-2021
Nadomešča:
SIST EN 352-1:2003
Varovala sluha - Splošne zahteve - 1. del: Naušniki
Hearing protectors - General requirements - Part 1: Earmuffs
Gehörschützer - Allgemeine Anforderungen - Teil 1: Kapselgehörschützer
Protecteurs individuels contre le bruit - Exigences générales - Partie 1: Serre-tête
Ta slovenski standard je istoveten z: EN 352-1:2020
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST EN 352-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 352-1:2021

---------------------- Page: 2 ----------------------
SIST EN 352-1:2021


EN 352-1
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2020
EUROPÄISCHE NORM
ICS 13.340.20 Supersedes EN 352-1:2002
English Version

Hearing protectors - General requirements - Part 1:
Earmuffs
Protecteurs individuels contre le bruit - Exigences Gehörschützer - Allgemeine Anforderungen - Teil 1:
générales - Partie 1 : Serre-tête Kapselgehörschützer
This European Standard was approved by CEN on 24 February 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 352-1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 352-1:2021
EN 352-1:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviations . 6
3.1 Terms and definitions . 6
3.2 Symbols and abbreviations . 8
4 Requirements . 8
4.1 Sizing . 8
4.2 Materials and construction . 9
4.2.1 Materials . 9
4.2.2 Construction . 9
4.3 Performance . 9
4.3.1 General .
...

SLOVENSKI STANDARD
oSIST prEN 352-1:2018
01-september-2018
Varovala sluha - Splošne zahteve - 1. del: Naušniki
Hearing protectors - General requirements - Part 1: Earmuffs
Gehörschützer - Allgemeine Anforderungen - Teil 1: Kapselgehörschützer
Protecteurs individuels contre le bruit - Exigences générales - Partie 1: Serre-tête
Ta slovenski standard je istoveten z: prEN 352-1
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
oSIST prEN 352-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 352-1:2018

---------------------- Page: 2 ----------------------
oSIST prEN 352-1:2018


DRAFT
EUROPEAN STANDARD
prEN 352-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2018
ICS 13.340.20 Will supersede EN 352-1:2002
English Version

Hearing protectors - General requirements - Part 1:
Earmuffs
Protecteurs individuels contre le bruit - Exigences Gehörschützer - Allgemeine Anforderungen - Teil 1:
générales - Partie 1: Serre-tête Kapselgehörschützer
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 159.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 352-1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 352-1:2018
prEN 352-1:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Requirements . 8
4.1 Sizing . 8
4.2 Materials and construction . 8
4.2.1 Materials . 8
4.2.2 Construction . 8
4.3 Performance . 8
4.3.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.