EN 14580:2005
(Main)Natural stone test methods - Determination of static elastic modulus
Natural stone test methods - Determination of static elastic modulus
The document specifies a method to determine the static elastic modulus of natural stone in uniaxial compression.
Prüfverfahren für Naturstein - Bestimmung des statischen Elastizitätsmoduls
Dieses Dokument legt ein Verfahren zur Bestimmung des statischen Elastizitätsmoduls von Naturstein unter
uniaxialem Druck fest.
Méthodes d'essai pour pierres naturelles - Détermination du module d'élasticité statique
Le présent document décrit une méthode pour déterminer le module d�élasticité statique de la pierre naturelle
dans des conditions de compression uniaxiale.
Preskušanje naravnega kamna – Ugotavljanje statičnega elastičnega modula
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 14580:2005
01-oktober-2005
3UHVNXãDQMHQDUDYQHJDNDPQD±8JRWDYOMDQMHVWDWLþQHJDHODVWLþQHJDPRGXOD
Natural stone test methods - Determination of static elastic modulus
Prüfverfahren für Naturstein - Bestimmung des statischen Elastizitätsmoduls
Méthodes d'essai pour pierres naturelles - Détermination du module d'élasticité statique
Ta slovenski standard je istoveten z: EN 14580:2005
ICS:
73.020 Rudarstvo in kamnolomsko Mining and quarrying
izkopavanje
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 14580:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 14580:2005
---------------------- Page: 2 ----------------------
SIST EN 14580:2005
EUROPEAN STANDARD
EN 14580
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2005
ICS 73.020; 91.100.15
English version
Natural stone test methods - Determination of static elastic
modulus
Méthodes d'essai pour pierres naturelles - Détermination Prüfverfahren für Naturstein - Bestimmung des statischen
du module d'élasticité statique Elastizitätsmoduls
This European Standard was approved by CEN on 3 March 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14580:2005: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 14580:2005
EN 14580:2005 (E)
Contents
Page
Foreword .3
1 Scope .5
2 Normative references .5
3 Principle.5
4 Symbols and definitions.5
5 Apparatus .5
6 Preparation of the specimens .6
6.1 Sampling.6
6.2 General .6
6.3 Test specimens .6
6.3.1 Dimensions of test specimens.6
6.3.2 Dimensions of the gauges.6
6.3.3 Surface finish .6
6.3.4 Planes of anisotropy.7
6.3.5 Conditioning of specimens before testing.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.