iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 11203:2009/A1:2020

(Amendment)

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)

Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten aus dem Schallleistungspegel - Änderung 1 (ISO 11203:1995/Amd 1:2020)

No scope available

Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de pression acoustique d'émission au poste de travail et en d'autres positions spécifiées à partir du niveau de puissance acoustique - Amendement 1 (ISO 11203:1995/Amd 1:2020)

Akustika - Emisija hrupa naprav in opreme - Ugotavljanje emisijske ravni zvočnega tlaka na mestu delovanja in na drugih opredeljenih mestih z ravni zvočne moči - Dopolnilo A1 (ISO 11203:1995/Amd 1:2020)

General Information

Status
Published
Publication Date
02-Jun-2020
Withdrawal Date
30-Dec-2020
ICS
17.140.20 - Noise emitted by machines and equipment
Technical Committee
CEN/TC 211 - Acuostics
Drafting Committee
CEN/TC 211 - Acuostics
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
03-Jun-2020
Completion Date
03-Jun-2020
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN ISO 11203:2009/A1:2020 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)

Relations

Amends
EN ISO 11203:2009 - Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
Effective Date
28-Feb-2018

Buy Standard

EN ISO 11203:2009/A1:2020EN ISO 11203:2009/A1:2020
PreviousNext
Amendment
EN ISO 11203:2009/A1:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11203:2009/A1:2020
01-september-2020
Akustika - Emisija hrupa naprav in opreme - Ugotavljanje emisijske ravni zvočnega
tlaka na mestu delovanja in na drugih opredeljenih mestih z ravni zvočne moči -
Dopolnilo A1 (ISO 11203:1995/Amd 1:2020)
Acoustics - Noise emitted by machinery and equipment - Determination of emission
sound pressure levels at a work station and at other specified positions from the sound
power level - Amendment 1 (ISO 11203:1995/Amd 1:2020)
Akustik - Geräuschabstrahlung von Maschinen und Geräten - Bestimmung von
Emissions-Schalldruckpegeln am Arbeitsplatz und an anderen festgelegten Orten aus
dem Schallleistungspegel - Änderung 1 (ISO 11203:1995/Amd 1:2020)
Acoustique - Bruit émis par les machines et équipements - Détermination des niveaux de
pression acoustique d'émission au poste de travail et en d'autres positions spécifiées à
partir du niveau de puissance acoustique - Amendement 1 (ISO 11203:1995/DAM
1:2018)
Ta slovenski standard je istoveten z: EN ISO 11203:2009/A1:2020
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
SIST EN ISO 11203:2009/A1:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11203:2009/A1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 11203:2009/A1:2020


EN ISO 11203:2009/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2020
EUROPÄISCHE NORM
ICS 17.140.20
English Version

Acoustics - Noise emitted by machinery and equipment -
Determination of emission sound pressure levels at a work
station and at other specified positions from the sound
power level - Amendment 1 (ISO 11203:1995/Amd
1:2020)
Acoustique - Bruit émis par les machines et Akustik - Geräuschabstrahlung von Maschinen und
équipements - Détermination des niveaux de pression Geräten - Bestimmung von Emissions-
acoustique d'émission au poste de travail et en d'autres Schalldruckpegeln am Arbeitsplatz und an anderen
positions spécifiées à partir du niveau de puissance festgelegten Orten aus dem Schallleistungspegel -
acoustique - Amendement 1 (ISO 11203:1995/Amd Änderung 1 (ISO 11203:1995/Amd 1:2020)
1:2020)
This amendment A1 modifies the European Standard EN ISO 11203:2009; it was approved by CEN on 29 December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11203:2009/A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11203:2009/A1:2020
EN ISO 11203:2009/A1:2020 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11203:2009/A1:2020
EN ISO 11203:2009/A1:2020 (E)
European foreword
This document (EN ISO 11203:2009/A1:2020) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which
is held by DIN.
This Amendment to the European Standard EN ISO 11203:2009 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2020,
and conflicting national standards shall be withdrawn at the latest by December 2020.
Attenti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 20270:2022(Main)
Acoustics - Characterization of sources of structure-borne sound and vibration - Indirect measurement of blocked forces (ISO 20270:2019)
SIST EN ISO 20270:2023

This document specifies a method where a vibrating component (a source of structure-borne sound or vibration) is attached to a passive structure (or receiver) and is the cause of vibration in, or structure-borne sound radiation from, the assembly. Examples are pumps installed in ships, servo motors in vehicles or machines and plant in buildings. Almost any vibrating component can be considered as a source in this context.
Due to the need to measure vibration at all contact degrees of freedom (DOFs) (connections between the source and receiver), this document can only be applied to assemblies for which such measurement is possible.
This document is applicable only to assemblies whose frequency response functions (FRFs) are linear and time invariant.
The source can be installed into a real assembly or attached to a specially designed test stand (as described in 5.2).
The standard method has been validated for stationary signals such that the results can be presented in the frequency domain. However, the method is not restricted to stationary signals: with appropriate data processing, it is also applicable to time-varying signals such as transients and shocks (provided linearity and time invariance of the FRFs are preserved).
This document provides a method for measurement and presentation of blocked forces, together with guidelines for minimizing uncertainty. It provides a method evaluating the quality of the results through an on-board validation procedure but does not comment on the acceptability or otherwise of the results.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17201-6:2022(Main)
Acoustics - Noise from shooting ranges - Part 6: Sound pressure measurements close to the source for determining exposure to sound (ISO 17201-6:2021)
SIST EN ISO 17201-6:2022

This document specifies methods for recording the time history of the sound pressure produced either by shooting with calibres of less than 20 mm, or by detonation of explosive charges of less than 50 g TNT equivalent, within the shooting range at locations of interest, regarding the exposure to sound of the shooter, or any other person within the shooting range. The time history of the sound pressure can be the basis for further analyses of this type of sound at the locations of interest.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 7849-2:2022(Main)
Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 2: Engineering method including determination of the adequate radiation factor (ISO/TS 7849-2:2009)
SIST-TS CEN ISO/TS 7849-2:2022

ISO/TS 7849-2:2009 gives basic requirements for a reproducible method for the determination of the sound power level of the noise emitted by machinery or equipment by using surface vibration measurements, together with the knowledge of the machinery specific sound radiation factor in the frequency bands. The method is only applicable to noise which is emitted by vibrating surfaces of solid structures and not to noise generated aerodynamically.
This vibration measurement method is especially applicable in cases where accurate direct airborne noise measurements, e.g. as specified in ISO 3746, ISO 3747, and ISO 9614 (all parts), are not possible because of high background noise or other parasitic environmental interferences; or, if a distinction is required between the total radiated sound power and its structure vibration generated component.
The methods described in ISO/TS 7849-2:2009 apply mainly to processes that are stationary with respect to time.
Recommendations on the selection of frequency bands are given in an annex.

  • Technical specification
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 7849-1:2022(Main)
Acoustics - Determination of airborne sound power levels emitted by machinery using vibration measurement - Part 1: Survey method using a fixed radiation factor (ISO/TS 7849-1:2009)
SIST-TS CEN ISO/TS 7849-1:2022

ISO/TS 7849-1:2009 gives basic requirements for reproducible methods for the determination of an upper limit for the A-weighted sound power level of the noise emitted by machinery or equipment by using surface vibration measurements. The method is only applicable to noise which is emitted by vibrating surfaces of solid structures and not to noise generated aerodynamically.
This vibration measurement method is especially applicable in cases where accurate direct airborne noise measurements, e.g. as specified in ISO 3746, ISO 3747, and ISO 9614 (all parts), are not possible because of high background noise or other parasitic environmental interferences; or if a distinction is required between the total radiated sound power and its structure vibration generated component.
The methods described in ISO/TS 7849-1:2009 apply mainly to processes that are stationary with respect to time.

  • Technical specification
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11202:2010/A1:2021(Amendment)
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment 1 (ISO 11202:2010/Amd 1:2020)
SIST EN ISO 11202:2010/A1:2021

2021-04-15 HD: Through Decision BT C067/2021, BT approved revised Annex ZA after Formal Vote

  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11690-1:2020(Main)
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies (ISO 11690-1:2020)
SIST EN ISO 11690-1:2021

This document outlines strategies to be used in dealing with noise problems in existing and planned workplaces by describing basic concepts in noise control (noise reduction, noise emission, noise immission and noise exposure). It is applicable to all types of workplaces and all types of sources of sound which are met in workplaces, including human activities.
It includes those important strategies to adopt when buying a new machine or equipment.
This document deals only with audible sound.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11690-2:2020(Main)
Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures (ISO 11690-2:2020)
SIST EN ISO 11690-2:2021

This document deals with the technical aspects of noise control in workplaces. The various technical measures are stated, the related acoustical quantities described, the magnitude of noise reduction discussed, and the verification methods outlined.
This document deals only with audible sound.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5135:2020(Main)
Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation test room (ISO 5135:2020)
SIST EN ISO 5135:2020

This document establishes general rules for the acoustic testing of air-terminal devices, air-terminal units, dampers and valves used in air diffusion and air distribution systems in order to determine sound power levels as defined in ISO 3741.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11200:2014/A1:2020(Amendment)
Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions - Amendment 1 (ISO 11200:2014/Amd 1:2018)
SIST EN ISO 11200:2014/A1:2020

2020-01-17 JF: Through decision BT C190/2019, the BT approved the removal of the link for this standard with the Machinery Directive.
2019-05-31 JF: Following the discussion at the Nucleus (core group of the CEN-CENELEC sector on machinery safety), it was concluded that this standard should not be listed in the Official Journal of European Union (OJEU) under the Machinery Directive 2006/42/EC because these are guidelines. This had been agreed with the TC. CCMC is preparing the BT document on the withdrawal of the link with the Machinery Directive.
2018-06-13 - in-check TAN : Consultant's assessment is missing.

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17201-3:2019(Main)
Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations (ISO 17201-3:2019)
SIST EN ISO 17201-3:2019

This document specifies methods of predicting the sound exposure level of shooting sound for a single shot at a given reception point. Guidelines are given to calculate other acoustic indices from the sound exposure level. The prediction is based on the angular source energy distribution of the muzzle blast as defined in ISO 17201-1 or calculated using values from ISO 17201-2.
This document applies to weapons with calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent, at distances where peak pressures, including the contribution from projectile sound, are less than 1 kPa (154 dB).
NOTE       National or other regulations, which could be more stringent, can apply.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day