Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services

This European Standard specifies the procedure for classification of construction products and building elements using data from fire resistance and smoke leakage tests which are within the direct field of application of the relevant test method. Classification on the basis of extended application of test results is also included in the scope of this European Standard."
This European Standard deals with:
a)   loadbearing elements without a fire separating function:
walls;
floors;
roofs;
beams;
columns;
balconies;
walkways;
stairs.
b)   loadbearing elements with a fire separating function, with or without glazing, services and fixtures:
walls;
floors;
roofs;
raised floors.
c)   products and systems for protecting elements or parts of the works:
ceilings with no independent fire resistance;
fire protective coatings, claddings and screens;
d)   non-loadbearing elements or parts of works, with or without glazing, services and fixtures:
partitions;
facades (curtain walls) and external walls;
ceilings with independent fire resistance;
raised floors
fire doors and shutters and their closing devices;
smoke control doors;
conveyor systems and their closures;
penetration seals;
linear gap seals;
service ducts and shafts;
chimneys.
e)   wall and ceiling coverings with fire protection ability.
f)   lift landing doors which are tested according to EN 81-58 are excluded from this European Standard. Lift landing doors which are tested in accordance with EN 1634-1, are classified in accordance with 7.5.5.
Relevant test methods which have been prepared for these elements are listed in Clauses 2 and 7.

Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 2: Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprüfungen, mit Ausnahme von Lüftungsanlagen

Diese Europäische Norm spezifiziert das Verfahren zur Klassifizierung von Bauprodukten und Bauteilen anhand der Ergebnisse von Feuerwiderstandsprüfungen und Prüfungen zur Rauchdichtheit entsprechend dem direkten Anwendungsbereich der zugehörigen Prüfverfahren. Die Klassifizierung auf der Basis des erweiterten Anwendungsbereichs von Versuchsergebnissen wird ebenfalls in dieser Europäischen Norm behandelt.
In dieser Europäischen Norm werden behandelt:
a)   tragende Bauteile ohne raumabschließende Funktion:
Wände;
Decken;
Dächer;
Balken;
Stützen;
Balkone;
Laubengänge;
Treppen;
b)   tragende Bauteile mit raumabschließender Funktion, mit oder ohne Verglasung, haustechnischer Anlagen und Befestigungen:
Wände;
Decken;
Dächer;
Doppelböden;
c)   Produkte und Systeme zum Schutz von Bauteilen oder Teilen von Bauwerken:
Unterdecken ohne eigener Feuerwiderstandsfähigkeit;
Brandschutzbeschichtungen, Bekleidungen und Abschirmungen;
d)   nichttragende Bauteile oder Teile von Bauwerken, mit oder ohne Verglasung, haustechnischer Anlagen und Befestigungen:
Trennwände;
Vorhangfassaden und Außenwände;
Unterdecken mit eigener Feuerwiderstandsfähigkeit;
   Doppelböden
Feuerschutztüren und Abschlüsse und ihre Schließvorrichtungen;
Rauchschutztüren;
Förderanlagen und ihre Abschlüsse;
Abschottungen von Durchführungen;
Abdichtungssysteme für Bauteilfugen;
Installationskanäle und -schächte;
Abgasanlagen;
e)   brandschutztechnisch wirksame Bekleidungen von Wänden und Decken;
f)   Fahrschachttüren, die nach EN 81-58 geprüft wurden, sind nicht Bestandteil dieser Europäischen Norm. Fahrschachttüren, die nach EN 1634-1 geprüft wurden, werden nach 7.5.5 klassifiziert.
Die jeweils geltenden Prüfverfahren, die für diese Produkte aufgestellt worden sind, sind in den Abschnitten 2 und 7 aufgelistet.

Classement au feu des produits et éléments de construction - Partie 2: Classement à partir des données d'essais de résistance au feu à l'exclusion des produits utilisés dans les systèmes de ventilation

La présente Norme européenne spécifie le mode opératoire de classement des produits et éléments de construction à partir des données des essais de résistance au feu et d'étanchéité aux fumées qui font partie du domaine d'application directe de la méthode d'essai correspondante. Le domaine d’application de la présente Norme européenne inclut également le classement basé sur l’application étendue des résultats d’essai.
La présente Norme européenne couvre les produits et éléments suivants :
a)   éléments porteurs sans fonction de compartimentage :
—   murs ;
—   planchers ;
—   toitures ;
—   poutres ;
—   poteaux ;
—   balcons ;
—   passerelles ;
—   escaliers ;
b)   éléments porteurs ayant une fonction de compartimentage, avec ou sans vitrage, services et accessoires :
—   murs ;
—   planchers ;
—   toitures ;
—   planchers surélevés ;
c)   produits et systèmes destinés à protéger des éléments ou des parties des ouvrages :
—   plafonds n'ayant pas de résistance au feu propre ;
—   revêtements, enduits, bardages et écrans de protection incendie ;
d)   éléments non porteurs ou parties d'ouvrages, avec ou sans vitrage, services et accessoires :
—   cloisons ;
—   façades (murs rideaux) et murs extérieurs ;
—   plafonds ayant une résistance au feu propre ;
—   planchers surélevés ;
—   portes et fermetures résistantes au feu ainsi que leurs systèmes de fermeture ;
—   portes étanches aux fumées ;
—   fermetures de passages pour convoyeurs et bandes transporteuses ;
—   calfeutrements de trémies ;
—   calfeutrements de joints linéaires ;
—   gaines pour installation technique ;
—   cheminées ;
e)   revêtements de murs et de plafonds avec capacité de protection contre l'incendie ;
f)   les portes palières d'ascenseurs qui sont soumises à essai conformément à l'EN 81-58 sont exclues de la présente Norme européenne. Les portes palières d'ascenseurs qui sont soumises à essai conformément à l'EN 1634-1 sont classées conformément au 7.5.5.
Les Articles 2 et 7 donnent la liste des méthodes d'essais pertinentes qui ont été élaborées pour ces éléments.

Požarna klasifikacija gradbenih proizvodov in elementov stavb - 2. del: Klasifikacija na podlagi podatkov iz preskusov požarne odpornosti, izvzete so prezračevalne naprave

Ta evropski standard določa postopek klasifikacije gradbenih proizvodov in elementov stavb na podlagi podatkov iz preskusov požarne odpornosti in uhajanja dima, ki spadajo v neposredno področje uporabe ustrezne preskusne metode. Področje uporabe tega evropskega standarda zajema tudi klasifikacijo na podlagi razširjene uporabe rezultatov preskusov.
Ta evropski standard obravnava naslednje proizvode:
a)   nosilni elementi brez funkcije izolacije požara:
stene,
podi,
strehe,
tramovi,
stebri,
balkoni,
prehodi,
stopnice;
b)   nosilni elementi s funkcijo izolacije požara (z zasteklitvijo, napravami in nosilci):
stene,
podi,
strehe,
dvignjeni podi;
c)   proizvodi in sistemi za zaščito elementov ali delov konstrukcije:
stropi brez neodvisne požarne odpornosti,
protipožarni premazi, prevleke in ponjave;
d)   nenosilni elementi ali deli konstrukcije (z zasteklitvijo, etažami in pritiklinami):
pregrade,
fasade (predelne stene) in zunanje stene,
stropi z neodvisno požarno odpornostjo,
dvignjeni podi,
protipožarna vrata in polkna z zapiralnimi mehanizmi,
vrata za nadzor dima,
transportni sistemi in njihovo ohišje,
zatesnitve,
zatesnitve medvodnih rež,
servisni kanali in jaški,
dimniki;
e) stenske in stropne kritine s protipožarno funkcijo;
f) etažna vrata dvigal, preskušena v skladu s standardom EN 81-58, niso zajeta v tem evropskem standardu. Etažna vrata dvigal, preskušena v skladu s standardom EN 1634-1, so klasificirana v skladu s točko 7.5.5.
Ustrezne preskusne metode, ki so bile izdelane za te elemente, so navedene v 2. in 7. točki.

General Information

Status
Withdrawn
Publication Date
21-Jun-2016
Withdrawal Date
30-May-2023
Current Stage

Relations

Buy Standard

Standard
EN 13501-2:2016
English language
79 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten - Teil 2: Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprüfungen, mit Ausnahme von LüftungsanlagenClassement au feu des produits et éléments de construction - Partie 2: Classement à partir des données d'essais de résistance au feu à l'exclusion des produits utilisés dans les systèmes de ventilationFire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 13501-2:2016SIST EN 13501-2:2016en,fr,de01-september-2016SIST EN 13501-2:2016SLOVENSKI
STANDARDSIST EN 13501-2:2008+A1:20091DGRPHãþD



SIST EN 13501-2:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13501-2
June
t r s x ICS
s uä t t rä w r Supersedes EN
s u w r sæ tã t r r y ªA sã t r r {English Version
Fire classification of construction products and building elements æ Part
tã Classification using data from fire resistance testsá excluding ventilation services Classement au feu des produits et éléments de construction æ Partie
tã Classement à partir des données d 5essais de résistance au feu à l 5exclusion des produits utilisés dans les systèmes de ventilation
Klassifizierung von Bauprodukten und Bauarten zu ihrem Brandverhalten æ Teil
tã Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprüfungená mit Ausnahme von Lüftungsanlagen This European Standard was approved by CEN on
t u April
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u w r sæ tã t r s x ESIST EN 13501-2:2016



EN 13501-2:2016 (E) 2 Contents Page European foreword . 5 Introduction . 6 1 Scope . 7 2 Normative references . 8 3 Terms and definitions . 11 4 Fire scenarios . 15 4.1 General . 15 4.2 The standard temperature/time curve (post flash-over fire) . 15 4.3 The slow heating curve (smouldering fire) . 16 4.4 The ‘semi-natural’ fire . 16 4.5 The external fire exposure curve . 17 4.6 Constant temperature attack . 17 5 Resistance to fire performance characteristics .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.