EN ISO 15465:2004

Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004)

ISO 15465:2004 specifies the requirements for the design, manufacture and testing of four principal types of stripwound metal hose and hose assemblies, of which only one type is for pressure applications. The four are: single overlap, unpacked and packed; double overlap, unpacked and packed, the last of these having maximum permissible pressures of up to 40 bar.
These hoses and hose assemblies may be supplied in nominal sizes from DN 6 to DN 500 and may operate at temperatures up to 600 °C dependent on materials of construction.

Rohrleitungen - Gewickelte Metallschläuche und Schlauchleitungen (ISO 15465:2004)

Diese Internationale Norm legt die Anforderungen für die Konstruktion, Herstellung und Prüfung von vier Haupt-typen von gewickelten Metallschläuchen und Schlauchleitungen fest, von denen lediglich eine Bauart für Anwendungsfälle unter Druckbeanspruchung vorgesehen ist. Die vier Bauarten sind: Schläuche mit einfacher Über-lappung, mit oder ohne Dichtung, sowie mit doppelter Überlappung, mit oder ohne Dichtung, wobei für letztere     maximal zulässige Drücke bis 40 bar gelten.
Diese Schläuche und Schlauchleitungen können in Nennweiten DN 6 bis DN 500 geliefert werden und je nach den für die Herstellung verwendeten Werkstoffen bei Temperaturen bis 600 °C betrieben werden.

Tuyauteries - Tuyaux et tuyauteries métalliques flexibles agrafés (ISO 15465:2004)

L'ISO 15465:2004 spécifie les exigences pour la conception, la fabrication et les essais des quatre principaux types de tuyaux et tuyauteries métalliques flexibles agrafés, dont un seul type est destiné aux applications sous pression. Les quatre types sont: agrafage simple, sans joint et avec joint, et agrafage double, sans joint et avec joint, ce dernier type ayant des pressions maximales admissibles inférieures ou égales à 40 bar.
Ces tuyaux et tuyauteries flexibles peuvent être fournis dans des diamètres nominaux de DN 6 à DN 500 et peuvent être utilisés à des températures inférieures ou égales à 600 °C en fonction des matériaux de fabrication.

Cevovod - Ovite kovinske cevi in cevni priključki (ISO 15465:2004)

General Information

• Status: Published
• Publication Date: 14-Mar-2004
• Withdrawal Date: 29-Sep-2004
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 342 - Metal hoses, hose assemblies, bellows and expansion joints
• Drafting Committee: CEN/TC 342 - Metal hoses, hose assemblies, bellows and expansion joints
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 04-May-2009
• Completion Date: 04-May-2009
• Ref Project: SIST EN ISO 15465:2004 - Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004)

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Rohrleitungen - Gewickelte Metallschläuche und Schlauchleitungen (ISO 15465:2004)Tuyauteries - Tuyaux et tuyauteries métalliques flexibles agrafés (ISO 15465:2004)Pipework - Stripwound metal hoses and hose assemblies (ISO 15465:2004)23.040.70Gumene cevi in armatureHoses and hose assembliesICS:Ta slovenski standard je istoveten z:EN ISO 15465:2004SIST EN ISO 15465:2004en01-september-2004SIST EN ISO 15465:2004SLOVENSKI
STANDARD



SIST EN ISO 15465:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 15465March 2004ICS 23.040.70English versionPipework - Stripwound metal hoses and hose assemblies (ISO15465:2004)Tuyauteries - Tuyaux et tuyauteries métalliques flexiblesagrafés (ISO 15465:2004)Rohrleitungen - Gewickelte Metallschläuche undMetallschlauchleitungen (ISO 15465:2004)This European Standard was approved by CEN on 1 March 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 15465:2004 ESIST EN ISO 15465:2004



EN ISO 15465:2004 (E)2ForewordThis document (EN ISO 15465:2004) has been prepared by Technical Committee ISO/TC 5"Ferrous metal pipes and metallic fittings" in collaboration with Technical Committee CEN/TC342 "Metal hoses, hose assemblies, bellows and expansion joints", the secretariat of which isheld by UNI.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by August 2004, and conflicting nationalstandards shall be withdrawn at the latest by August 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium,Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Endorsement noticeThe text of ISO 15465:2004 has been approved by CEN as EN ISO 15465:2004 without anymodifications.SIST EN ISO 15465:2004



Reference numberISO 15465:2004(E)© ISO 2004
INTERNATIONAL STANDARD ISO15465First edition2004-03-15Pipework — Stripwound metal hoses and hose assemblies Tuyauteries — Tuyaux et tuyauteries métalliques flexibles agrafés
SIST EN ISO 15465:2004



ISO 15465:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2004 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Publishe
...