Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations (ISO 17201-3:2019)

This document specifies methods of predicting the sound exposure level of shooting sound for a single shot at a given reception point. Guidelines are given to calculate other acoustic indices from the sound exposure level. The prediction is based on the angular source energy distribution of the muzzle blast as defined in ISO 17201-1 or calculated using values from ISO 17201-2.
This document applies to weapons with calibres of less than 20 mm or explosive charges of less than 50 g TNT equivalent, at distances where peak pressures, including the contribution from projectile sound, are less than 1 kPa (154 dB).
NOTE       National or other regulations, which could be more stringent, can apply.

Akustik - Geräusche von Schießplätzen - Teil 3: Berechnung der Schallausbreitung (ISO 17201-3:2019)

Dieses Dokument legt Verfahren für die Prognose vom Schallexpositionspegel des Schießgeräusches eines Schusses an einem gegebenen Empfangs- bzw. Immissionspunkt fest. Anleitungen werden gegeben, wie andere akustische Indizes über den Schallexpositionspegel berechnet werden können. Die Prognose beruht auf der Berechnung der in ISO 17201 1 angegebenen Werte oder auf der nach ISO 17201 2 berechneten winkelabhängigen Schall- bzw. Quellenenergieverteilung des Mündungsknalls.
Dieses Dokument ist anwendbar für Waffen mit einem Kaliber kleiner als 20 mm oder für Treibladungen von weniger als 50 g TNT-Äquivalent, für Entfernungen, wo die Spitzendrücke, einschließlich des Beitrags vom Geschossknall, kleiner als 1 kPa (154 dB) sind.
ANMERKUNG   Es können nationale oder andere Regelwerke, die noch stringenter sein könnten, gelten.

Acoustique - Bruit des stands de tir - Partie 3: Calcul de la propagation du son (ISO 17201-3:2019)

Le présent document spécifie des méthodes de prévision des niveaux d'exposition sonore pour un tir individuel en un point de réception donné. Il donne des lignes directrices pour calculer d'autres indices acoustiques à partir du niveau d'exposition sonore. Les prévisions s'appuient sur la distribution angulaire de l'énergie acoustique émise par la détonation à la bouche, telle que définie dans l'ISO 17201-1 ou calculée à partir des valeurs de l'ISO 17201-2.
Le présent document couvre les armes de calibre inférieur à 20 mm et des charges explosives de moins de 50 g d'équivalent TNT, à des distances où les valeurs de crête de la pression acoustique — y compris la contribution du bruit du projectile — sont inférieures à 1 kPa (154 dB).
NOTE       Des réglementations nationales ou autres, éventuellement plus strictes, peuvent s'appliquer.

Akustika - Hrup s strelišč - 3. del: Izračun širjenja zvoka (ISO 17201-3:2019)

Ta dokument določa metode za predvidevanje ravni zvočne izpostavljenosti pri streljanju za posamezen strel na določeni sprejemni točki. Podane so smernice za izračun drugih akustičnih indeksov na podlagi ravni zvočne izpostavljenosti. Predvidevanje temelji na kotni porazdelitvi energije vira poka potisnih plinov iz ustja strelnih orožij, kot je opredeljeno v standardu ISO 17201-1 ali izračunano na podlagi vrednosti iz standarda ISO 17201-2. Ta dokument se uporablja za orožja s kalibri manj kot 20 mm ali eksplozivne naboje z ekvivalentno maso TNT manj kot 50 g na razdaljah, pri katerih so vršni tlaki, vključno z vplivom zvoka izstrelka, manjši od 1 kPa (154 dB).
OPOMBA: Uporabljajo se lahko nacionalni ali drugi predpisi, ki so morda še strožji.

General Information

Status
Published
Publication Date
26-Feb-2019
Withdrawal Date
30-Aug-2019
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Feb-2019
Completion Date
27-Feb-2019

Relations

Buy Standard

Standard
EN ISO 17201-3:2019 - BARVE
English language
68 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 17201-3:2018 - BARVE
English language
61 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17201-3:2019
01-maj-2019
1DGRPHãþD
SIST EN ISO 17201-3:2010
$NXVWLND+UXSVVWUHOLãþGHO,]UDþXQãLUMHQMD]YRND ,62
Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations (ISO
17201-3:2019)
Akustik - Geräusche von Schießplätzen - Teil 3: Berechnung der Schallausbreitung (ISO
17201-3:2019)
Acoustique - Bruit des stands de tir - Partie 3: Calcul de la propagation du son (ISO
17201-3:2019)
Ta slovenski standard je istoveten z: EN ISO 17201-3:2019
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
95.020 Vojaštvo na splošno Military in general
97.220.10 Športni objekti Sports facilities
SIST EN ISO 17201-3:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17201-3:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 17201-3:2019


EN ISO 17201-3
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2019
EUROPÄISCHE NORM
ICS 17.140.20; 95.020; 97.220.10 Supersedes EN ISO 17201-3:2010
English Version

Acoustics - Noise from shooting ranges - Part 3: Sound
propagation calculations (ISO 17201-3:2019)
Acoustique - Bruit des stands de tir - Partie 3: Calcul de Akustik - Geräusche von Schießplätzen - Teil 3:
la propagation du son (ISO 17201-3:2019) Berechnung der Schallausbreitung (ISO 17201-3:2019)
This European Standard was approved by CEN on 19 January 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17201-3:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17201-3:2019
EN ISO 17201-3:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17201-3:2019
EN ISO 17201-3:2019 (E)
European foreword
This document (EN ISO 17201-3:2019) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which
is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2019, and conflicting national standards shall
be withdrawn at the latest by August 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 17201-3:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17201-3:2019 has been approved by CEN as EN ISO 17201-3:2019 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 17201-3:2019

---------------------- Page: 6 ----------------------

SIST EN ISO 17201-3:2019
INTERNATIONAL ISO
STANDARD 17201-3
Second edit
...

SLOVENSKI STANDARD
oSIST prEN ISO 17201-3:2018
01-december-2018
$NXVWLND+UXSVWUHOVNLKSROLJRQRYGHO6PHUQLFH]DL]UDþXQãLUMHQMD]YRND
,62)',6
Acoustics - Noise from shooting ranges - Part 3: Sound propagation calculations
(ISO/FDIS 17201-3:2018)
Akustik - Geräusche von Schießplätzen - Teil 3: Anleitung für die Berechnung der
Schallausbreitung (ISO/FDIS 17201-3:2018)
Acoustique - Bruit des stands de tir - Partie 3: Calcul de la propagation du son (ISO/FDIS
17201-3:2018)
Ta slovenski standard je istoveten z: prEN ISO 17201-3
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
95.020 Vojaštvo na splošno Military in general
97.220.10 Športni objekti Sports facilities
oSIST prEN ISO 17201-3:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 17201-3:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 17201-3:2018
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 17201-3
ISO/TC 43/SC 1
Acoustics — Noise from shooting
Secretariat: DIN
ranges —
Voting begins on:
2018-09-25
Part 3:
Voting terminates on:
Sound propagation calculations
2018-12-18
Acoustique — Bruit des stands de tir —
Partie 3: Calcul de la propagation du son
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 17201-3:2018(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 17201-3:2018
ISO/FDIS 17201-3:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 17201-3:2018
ISO/FDIS 17201-3:2018(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Source modelling. 2
4.1 General . 2
4.2 Muzzle blast . 2
4.2.1 Background. 2
4.2.2 Free-field situation .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.