EN 17220:2019

Packaging - Flexible aluminium tubes - Tube nozzles

This document is applicable to flexible aluminum tubes.
This document defines the dimensions of the tube nozzle including orifice and thread.

Packmittel - Flexible Aluminiumtuben - Tubenhälse

Dieses Dokument ist anwendbar für flexible Aluminiumtuben.
Dieses Dokument definiert die Abmessungen des Tubenhalses einschließlich der Tubenhalsöffnung und des Tubenhalsgewindes.

Emballage - Tubes souples en aluminium - Têtes de tubes

Le présent document est applicable aux tubes souples en aluminium.
Il définit les dimensions de la tête du tube, y compris l'orifice et le filetage.

Embalaža - Prožne aluminijaste tube - Odprtine/šobe

Ta dokument se uporablja za prožne aluminijaste tube. Ta dokument določa dimenzije šobe tube, vključno z odprtino in navojem.

General Information

• Status: Published
• Publication Date: 20-Aug-2019
• Withdrawal Date: 28-Feb-2020
• ICS: 55.120 - Cans. Tins. Tubes
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5/WG 26 - Packages made from flexible materials (e.g. flexible plastics, plastic laminates, paper/board laminated, metal foil laminates, textiles)
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Aug-2019
• Due Date: 05-Apr-2020
• Completion Date: 21-Aug-2019
• Ref Project: SIST EN 17220:2019 - Packaging - Flexible aluminium tubes - Tube nozzles

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17220:2019
01-december-2019
Embalaža - Prožne aluminijaste tube - Odprtine/šobe
Packaging - Flexible aluminium tubes - Tube nozzles
Packmittel - Aluminiumtuben - Tubenhälse
Emballage - Tubes souples en aluminium - Têtes
Ta slovenski standard je istoveten z: EN 17220:2019
ICS:
55.120 Pločevinke. Tube Cans. Tins. Tubes
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 17220:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17220:2019

---------------------- Page: 2 ----------------------
SIST EN 17220:2019


EN 17220
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2019
EUROPÄISCHE NORM
ICS 55.120
English Version

Packaging - Flexible aluminium tubes - Tube nozzles
Emballage - Tubes souples en aluminium - Têtes de Packmittel - Flexible Aluminiumtuben - Tubenhälse
tubes
This European Standard was approved by CEN on 7 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17220:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17220:2019
EN 17220:2019(E)
Contents Page
European foreword . 3
1 Scope . 3
2 Normative references . 4
3 Terms and definitions . 4
4 Dimensions . 5
5 Tube nozzle shapes . 5
Bibliography. 10

2

---------------------- Page: 4 ----------------------
SIST EN 17220:2019
EN 17220:2019 (E)
European foreword
This document (EN 17220:2019) has been prepared by Technical Committee CEN/TC 261 “Packaging”,
the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2020, and conflicting national standards shall
be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
Kingdom.
3

---------------------- Page: 5 --------
...