EN 2535:2011

Aerospace series - Vacuum deposition of cadmium

This standard defines the method for depositing cadmium layers according to the vacuum deposition process, for use in aerospace construction.
According to this process, cadmium metal is vaporised under vacuum and deposited directly on the base material with an interlayer. The coating produced in this way is ductile and electrically conductive.
This standard is applicable whenever referenced.

Luft- und Raumfahrt - Aufdampfen von Kadmium im Vakuum

Diese Europäische Norm legt das Verfahren zum Aufdampfen von Kadmiumschichten durch Vakuum-Aufdampfverfahren zur Verwendung bei Konstruktionen in Luft- und Raumfahrt fest.
Nach diesem Verfahren wird im Vakuum Kadmiummetall verdampft und mit einer Zwischenschicht direkt auf dem Grundwerkstoff niedergeschlagen. Die so erzeugte Schicht ist duktil und elektrisch leitend.
Diese Norm ist immer dann anzuwenden, wenn auf sie verwiesen wird.

Série aérospatiale - Cadmiage sous vide

Cette Norme européenne définit la méthode pour déposer des couches de cadmium selon le procédé de cadmiage sous vide, pour utilisation dans les constructions aéronautiques.
Selon ce procédé, le métal cadmié est vaporisé sous vide et déposé directement sur le matériau de base avec une couche intermédiaire. Le revêtement produit de cette manière est ductile et électriquement conducteur.
La présente norme est applicable chaque fois qu’elle est citée en référence.

Aeronavtika - Usedline kadmija v vakuumu

Ta evropski standard opredeljuje metodo za odlaganje plasti kadmija v skladu s postopkom usedlin v vakuumu, za uporabo v aeronavtični gradnji. V skladu s tem postopkom, se kadmijeva kovina upari v vakuumu in odlaga neposredno na osnovni material z vmesnim slojem. Premaz, ki se proizvaja tako, je duktilen in električno prevoden. Ta standard se uporablja, kadar je naveden.

General Information

• Status: Withdrawn
• Publication Date: 28-Jun-2011
• Withdrawal Date: 26-Apr-2022
• ICS: 49.040 - Coatings and related processes used in aerospace industry
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 5 - Non-Metallic
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-Apr-2022
• Ref Project: SIST EN 2535:2011 - Aerospace series - Vacuum deposition of cadmium

Relations

• Replaced By: EN 2535:2022 - Aerospace series - Vacuum deposition of cadmium
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Usedline kadmija v vakuumuLuft- und Raumfahrt - Aufdampfen von Kadmium im VakuumSérie aérospatiale - Cadmiage sous videAerospace series - Vacuum deposition of cadmium49.040Prevleke in z njimi povezani postopki, ki se uporabljajo v letalski in vesoljski industrijiCoatings and related processes used in aerospace industryICS:Ta slovenski standard je istoveten z:EN 2535:2011SIST EN 2535:2011en,de01-november-2011SIST EN 2535:2011SLOVENSKI
STANDARD



SIST EN 2535:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2535
June 2011 ICS 49.040 English Version
Aerospace series - Vacuum deposition of cadmium
Série aérospatiale - Cadmiage sous vide
Luft- und Raumfahrt - Aufdampfen von Kadmium im Vakuum This European Standard was approved by CEN on 12 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2535:2011: ESIST EN 2535:2011



EN 2535:2011 (E) 2 Contents PageForeword .4 1 Scope .5 2 Normative references .5 3 Purpose of process .5 4 Limitation of process use .5 5 Definitions .6 6 Thickness .6 7 Apparatus and materials .6 7.1 Vacuum enclosure .6 7.2 Deposition material.6 7.3 Masking material .6 8 Information for the processor .7 9 Condition of parts prior to processing .7 9.1 General .7 9.2 Stress relief treatment .7 10 Process schedule .7 11 Pre-treatment .8 11.1 Degreasing .
...