Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines

This European Standard applies to table edge finishing machines (see 3.1) and belt edge finishing machines (see 3.2) which are used to grind, polish, cut and shape the edge or surface of slabs, strips or tiles of natural stone and engineered stone (e.g. agglomerated stone) as defined by EN 14618:2009.
This European Standard deals with all significant hazards, hazardous situations and events relevant to edge finishing machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This European Standard deals all significant hazards that may occur within the expected lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This European Standard also applies to machines fitted with the following facilities/devices:
-   automatic tool change;
-   tilting and/or rotating head axis;
-   rotating workpiece support(s);
-   axes operating according a NC work programme;
-   mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
and the following accessory units:
-   spindle with grinding and polishing tool;
-   spindle with bush-hammering tool;
-   spindle with diamond wheel;
-   spindle with calibrating tool;
-   spindle with dripstone tool;
-   spindle with cutting tool;
-   spindle with shaping tool.
This European Standard does not deal with:
-   hand-held grinding machines;
-   machines intended for operation in a potentially explosive atmosphere;
-   operation in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
-   machines intended for outdoor operation.
This European Standard is not applicable to machinery which is manufactured before the date of publication of this document by CEN.

Maschinen und Anlagen zur Gewinnung und Bearbeitung von Naturstein - Sicherheit - Anforderungen für Kantenschleifmaschinen

Diese Norm gilt für stationäre Kanten- und Konturschleifmaschinen für Naturstein.
Diese Europäische Norm gilt nicht für:
-   Metallschleifmaschinen;
-   Holzschleifmaschinen;
-   handgeführte Schleifmaschinen;
-   Maschinen, die für den Betrieb in explosionsgefährdeten Bereichen vorgesehen sind;
-   vor- oder nachgeschaltete Förderelemente zum Transport der Werkstücke.
Diese Norm behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf Kantenschleifmaschinen zutreffen, wenn sie bestimmungsgemäß sowie unter Bedingungen von Fehl-anwendung verwendet werden, die für den Hersteller nach vernünftigem Ermessen vorhersehbar sind (siehe Abschnitt 4). Diese Norm spezifiziert die entsprechenden technischen Maßnahmen zur Beseitigung oder Ver-minderung der Risiken, die von den signifikanten Gefährdungen ausgehen.
Diese Europäische Norm behandelt die Gefahren während des Transports, der Inbetriebnahme, Verwendung und Wartung, Demontage und Entsorgung.
Dieses Dokument gilt nicht für Maschinen, die hergestellt wurden, bevor CEN dieses Dokument veröffent¬licht.

Machines et installations d'extraction et d'usinage des pierres naturelles - Sécurité - Prescriptions relatives aux machines de finition des bords

La présente Norme européenne s'applique aux machines de finition des bords à table (voir 3.1) et aux machines de finition des bords à courroie (voir 3.2) qui sont utilisées pour meuler, polir, couper, donner une forme aux bords ou à la surface des dalles, des bandes et des carreaux en pierre naturelle et en pierre artificielle (par exemple, en pierre agglomérée) telle que définie dans l'EN 14618:2009.
La présente Norme européenne traite de tous les phénomènes dangereux, situations et événements dangereux significatifs relatifs aux machines de finition des bords lorsqu'elles sont utilisées normalement et lorsqu'elles sont utilisées dans des conditions de mauvaise utilisation raisonnablement prévisibles par le fabricant (voir l’Article 4).
La présente Norme européenne spécifie les mesures techniques appropriées pour éliminer ou réduire les risques dus aux phénomènes dangereux significatifs.
La présente Norme européenne traite de tous les phénomènes dangereux pouvant survenir au cours de la durée de vie prévisible de la machine, y compris des phases de transport, de montage, de démontage, de mise hors service et de mise au rebut.
La présente Norme européenne s'applique également aux machines équipées des dispositifs/accessoires suivants :
-   mécanisme de changement automatique d’outils ;
-   axe de tête inclinable et/ou rotatif ;
-   support(s) de pièce rotatif(s) ;
-   axes dont les mouvements s'effectuent en fonction d'un programme de commande numérique ;
-   bridage de pièce mécanique, pneumatique, hydraulique ou à dépression de la pièce à usiner ;
et des accessoires suivants :
-   arbre doté d'un outil de meulage et rectification et d'un outil de polissage ;
-   arbre doté d'un outil de bouchardage ;
-   arbre doté d'une meule diamantée ;
-   arbre doté d'un outil de calibrage ;
-   arbre doté d'un larmier;
-   arbre doté d'un outil coupant ;
-   arbre doté d'un outil de rabotage ;
La présente Norme européenne ne traite pas :
-   des meuleuses portatives ;
-   des machines prévues pour une utilisation en atmosphère explosible ;
-   de l'utilisation dans des conditions environnementales sévères (par exemple, des températures extrêmes, un environnement corrosif) ;
-   des machines prévues pour être utilisées à l'extérieur.
La présente Norme européenne ne s'applique pas aux machines qui ont été fabriquées avant la date de publication du présent document par le CEN.

Stroji in obrati za miniranje in obdelavo naravnega kamna - Varnost - Zahteve za stroje za dodelavo robov

Ta evropski standard velja za mizne stroje za dodelavo robov (glej 3.1) ali pasovne stroje za dodelavo robov (glej 3.2), ki se uporabljajo za brušenje, poliranje, rezanje, oblikovanje robov ali površin tlakovcev, trakov ali ploščic iz naravnega in tehničnega kamna (npr. aglomeriranega kamna), kot je določeno s standardom EN 14618:2009.
Ta evropski standard opisuje vsa večja tveganja, nevarne situacije in nevarne dogodke v zvezi s stroji za dodelavo robov, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec (glejte točko 4).
Ta evropski standard določa ustrezne tehnične ukrepe za odpravljanje ali zmanjšanje tveganj, ki nastanejo pri resnih nevarnostih.
Ta evropski standard obravnava vsa večja tveganja v okviru predvidene življenjske dobe strojev, vključno s fazami transporta, sestavljanja, razstavljanja, onemogočanja in razrezovanja.
Ta evropski standard se uporablja tudi za stroje, opremljene z naslednjimi funkcijami/napravami:
– samodejna menjava orodja;
– os z nagibno in/ali vrtečo se glavo;
– vrteča se opora za obdelovanca;
– osi, ki delujejo v skladu z delovnim programom za računalniško krmiljenje;
– mehansko, pnevmatično, hidravlično ali vakuumsko vpenjanje obdelovanca;
in naslednjo pomožno opremo:
– vreteno z orodjem za brušenje in poliranje;
– vreteno z orodjem za klesanje;
– vreteno z diamantnim kolesom;
– vreteno z orodjem za kalibracijo;
– vreteno z orodjem za obode;
– vreteno z orodjem za rezanje;
– vreteno z orodjem za oblikovanje.
Ta evropski standard se ne uporablja za:
– ročne brusilne stroje;
– stroje, namenjene za delovanje v potencialno eksplozivni atmosferi;
– delovanje v neugodnih okoljskih pogojih (npr. ekstremne temperature, korozivno okolje);
– stroje, namenjene za uporabo na prostem.
Ta evropski standard se ne uporablja za stroje, izdelane pred datumom objave tega dokumenta s strani Evropskega odbora za standardizacijo (CEN).

General Information

Status
Published
Publication Date
18-Aug-2015
Withdrawal Date
28-Feb-2016
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
19-May-2021

Buy Standard

Standard
EN 15572:2015
English language
59 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stroji in obrati za miniranje in obdelavo naravnega kamna - Varnost - Zahteve za stroje za dodelavo robovMaschinen und Anlagen zur Gewinnung und Bearbeitung von Naturstein - Sicherheit - Anforderungen für KantenschleifmaschinenMachines et installations d'extraction et d'usinage des pierres naturelles - Sécurité - Prescriptions relatives aux machines de finition des bordsMachines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines73.120Oprema za predelavo rudninEquipment for processing of mineralsICS:Ta slovenski standard je istoveten z:EN 15572:2015SIST EN 15572:2015en,fr,de01-oktober-2015SIST EN 15572:2015SLOVENSKI
STANDARD



SIST EN 15572:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15572
August 2015 ICS 25.080.50; 73.120 English Version
Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines
Machines et installations d'extraction et d'usinage des pierres naturelles - Sécurité - Prescriptions relatives aux machines de finition des bords
Maschinen und Anlagen zur Gewinnung und Bearbeitung von Naturstein - Sicherheit - Anforderungen für Kantenschleifmaschinen This European Standard was approved by CEN on 3 July 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15572:2015 ESIST EN 15572:2015



EN 15572:2015 (E) 2 Contents Page European foreword . 4 Introduction . 5 1 Scope . 6 2 Normative references . 7 3 Terms and definitions . 8 4 List of significant hazards . 18 5 Safety requirements and/or protective measures . 20 5.1 General . 20 5.2 Controls . 20 5.3 Protection against mechanical hazards . 26 5.4 Protections against no mechanical hazards . 31 6 Information for use . 34 6.1 Signals and warning devices . 34 6.2 Marking . 34 6.3 Instruction handbook .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.