iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 14067:2018

(Main)

Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification (ISO 14067:2018)

Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification (ISO 14067:2018)

This document specifies principles, requirements and guidelines for the quantification and reporting of the carbon footprint of a product (CFP), in a manner consistent with International Standards on life cycle assessment (LCA) (ISO 14040 and ISO 14044).
Requirements and guidelines for the quantification of a partial CFP are also specified.
This document is applicable to CFP studies, the results of which provide the basis for different applications (see Clause 4).
This document addresses only a single impact category: climate change. Carbon offsetting and communication of CFP or partial CFP information are outside the scope of this document.
This document does not assess any social or economic aspects or impacts, or any other environmental aspects and related impacts potentially arising from the life cycle of a product.

Treibhausgase - Carbon Footprint von Produkten - Anforderungen an und Leitlinien für Quantifizierung (ISO 14067:2018)

Gaz à effet de serre - Empreinte carbone des produits - Exigences et lignes directrices pour la quantification (ISO 14067:2018)

Le présent document spécifie les principes, les exigences et les lignes directrices relatifs à la quantification et à la déclaration de l'empreinte carbone d'un produit (ECP) d'une manière cohérente avec les Normes internationales sur l'analyse du cycle de vie (ACV) (ISO 14040 et ISO 14044).
Des exigences et des lignes directrices concernant la quantification d'une empreinte carbone partielle d'un produit (ECP partielle) sont également spécifiées.
Le présent document est applicable aux études d'ECP, dont les résultats servent de base à différentes applications (voir Article 4).
Le présent document concerne uniquement la catégorie d'impact du changement climatique. La compensation carbone et la communication des informations de l'ECP ou de l'ECP partielle ne relèvent pas du domaine d'application du présent document.
Le présent document n'évalue aucun aspect ou impact social ou économique, ni aucun autre aspect environnemental et impacts associés résultant potentiellement du cycle de vie d'un produit.

Toplogredni plini - Ogljični odtis izdelkov - Zahteve in smernice za merjenje (ISO 14067:2018)

Ta dokument določa načela, zahteve in smernice za merjenje in poročanje o ogljičnem odtisu izdelka (CFP) na način, ki je skladen z mednarodnimi standardi za oceno življenjskega cikla (LCA) (ISO 14040 in ISO 14044).
Podane so tudi zahteve in smernice za merjenje delnega ogljičnega odtisa.
Ta dokument se uporablja za študije ogljičnega odtisa, katerih rezultati so podlaga za različne vrste uporabe (glej točko 4).
Ta dokument obravnava samo eno kategorijo vpliva: podnebne spremembe. Izravnava ogljika in posredovanje informacij o ogljičnem odtisu ali delnem ogljičnem odtisu ne spadata na področje uporabe tega dokumenta.
Ta dokument ne ocenjuje nobenih družbenih ali ekonomskih vidikov oziroma vplivov ali drugih okoljskih vidikov in s tem povezanih vplivov, ki bi lahko izhajali iz življenjskega cikla izdelka.

General Information

Status
Published
Publication Date
25-Sep-2018
Withdrawal Date
30-Mar-2019
ICS
13.020.40 - Pollution, pollution control and conservation
Technical Committee
CEN/SS S26 - Environmental Management
Drafting Committee
CEN/SS S26 - Environmental Management
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Sep-2018
Completion Date
26-Sep-2018
Ref Project
SIST EN ISO 14067:2019 - Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification (ISO 14067:2018)

Relations

Replaces
CEN ISO/TS 14067:2014 - Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013)
Effective Date
03-Oct-2018

Buy Standard

EN ISO 14067:2019 - BARVEEN ISO 14067:2019 - BARVE
PreviousNext
Standard
EN ISO 14067:2019 - BARVE
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 14067:2019
01-februar-2019
1DGRPHãþD
SIST-TS CEN ISO/TS 14067:2014
7RSORJUHGQLSOLQL2JOMLþQLRGWLVL]GHONRY=DKWHYHLQVPHUQLFH]DPHUMHQMH ,62

Greenhouse gases - Carbon footprint of products - Requirements and guidelines for
quantification (ISO 14067:2018)
Treibhausgase - Carbon Footprint von Produkten - Anforderungen an und Leitlinien für
Quantifizierung (ISO 14067:2018)
Gaz à effet de serre - Empreinte carbone des produits - Exigences et lignes directrices
pour la quantification (ISO 14067:2018)
Ta slovenski standard je istoveten z: EN ISO 14067:2018
ICS:
13.020.40 Onesnaževanje, nadzor nad Pollution, pollution control
onesnaževanjem in and conservation
ohranjanje
13.020.60 Življenjski ciklusi izdelkov Product life-cycles
SIST EN ISO 14067:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 14067:2019

---------------------- Page: 2 ----------------------

SIST EN ISO 14067:2019


EN ISO 14067
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2018
EUROPÄISCHE NORM
ICS 13.020.40 Supersedes CEN ISO/TS 14067:2014
English Version

Greenhouse gases - Carbon footprint of products -
Requirements and guidelines for quantification (ISO
14067:2018)
Gaz à effet de serre - Empreinte carbone des produits - Treibhausgase - Carbon Footprint von Produkten -
Exigences et lignes directrices pour la quantification Anforderungen an und Leitlinien für Quantifizierung
(ISO 14067:2018) (ISO 14067:2018)
This European Standard was approved by CEN on 25 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14067:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 14067:2019
EN ISO 14067:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 14067:2019
EN ISO 14067:2018 (E)
European foreword
This document (EN ISO 14067:2018) has been prepared by Technical Committee ISO/TC 207
"Environmental management" in collaboration with Technical Committee CEN/SS S26 “Environmental
management” the secretariat of which is held by CCMC.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TS 14067:2014.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14067:2018 has been approved by CEN as EN ISO 14067:2018 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 14067:2019

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 14065:2021(Main)
General principles and requirements for bodies validating and verifying environmental information (ISO 14065:2020)
SIST EN ISO 14065:2022

This document specifies principles and requirements for bodies performing validation and verification of environmental information statements.
Any programme requirements related to bodies are additional to the requirements of this document.
This document is a sector application of ISO/IEC 17029:2019, which contains general principles and requirements for the competence, consistent operation and impartiality of bodies performing validation/verification as conformity assessment activities.
This document includes sector-specific requirements in addition to the requirements of ISO/IEC 17029:2019.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14091:2021(Main)
Adaptation to climate change - Guidelines on vulnerability, impacts and risk assessment (ISO 14091:2021)
SIST EN ISO 14091:2021

This document gives guidelines for assessing the risks related to the potential impacts of climate change. It describes how to understand vulnerability and how to develop and implement a sound risk assessment in the context of climate change. It can be used for assessing both present and future climate change risks.
Risk assessment according to this document provides a basis for climate change adaptation planning, implementation, and monitoring and evaluation for any organization, regardless of size, type and nature.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14090:2019(Main)
Adaptation to climate change - Principles, requirements and guidelines (ISO 14090:2019)
SIST EN ISO 14090:2019

This document specifies principles, requirements and guidelines for adaptation to climate change. This includes the integration of adaptation within or across organizations, understanding impacts and uncertainties and how these can be used to inform decisions.
This document is applicable to any organization, regardless of size, type and nature, e.g. local, regional, international, business units, conglomerates, industrial sectors, natural resource management units.
This document can support the development of sector-, aspect- or element-specific climate change adaptation standards.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14064-2:2019(Main)
Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO 14064-2:2019)
SIST EN ISO 14064-2:2019

This document specifies principles and requirements and provides guidance at the project level for the quantification, monitoring and reporting of activities intended to cause greenhouse gas (GHG) emission reductions or removal enhancements. It includes requirements for planning a GHG project, identifying and selecting GHG sources, sinks and reservoirs (SSRs) relevant to the project and baseline scenario, monitoring, quantifying, documenting and reporting GHG project performance and managing data quality.
The ISO 14060 family of standards is GHG programme neutral. If a GHG programme is applicable, the requirements of that GHG programme are additional to the requirements of the ISO 14060 family of standards.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14064-3:2019(Main)
Greenhouse gases - Part 3: Specification with guidance for the verification and validation of greenhouse gas statements (ISO 14064-3:2019)
SIST EN ISO 14064-3:2019

This document specifies principles and requirements and provides guidance for verifying and validating greenhouse gas (GHG) statements.
It is applicable to organization, project and product GHG statements.
The ISO 14060 family of standards is GHG programme neutral. If a GHG programme is applicable, requirements of that GHG programme are additional to the requirements of the ISO 14060 family of standards.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14064-1:2019(Main)
Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO 14064-1:2018)
SIST EN ISO 14064-1:2019

This document specifies principles and requirements at the organization level for the quantification and reporting of greenhouse gas (GHG) emissions and removals. It includes requirements for the design, development, management, reporting and verification of an organization's GHG inventory.
The ISO 14064 series is GHG programme neutral. If a GHG programme is applicable, requirements of that GHG programme are additional to the requirements of the ISO 14064 series.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4484-3:2023(Main)
Textiles and textile products - Microplastics from textile sources - Part 3: Measurement of collected material mass released from textile end products by domestic washing method (ISO 4484-3:2023)
SIST EN ISO 4484-3:2023

This document specifies a method for measuring the collected material mass released from the outlet hose of a standard washing machine, described in ISO 6330, through the washing process.
NOTE            The washing condition of textile end products is indicated by the care labelling according to ISO 3758.
This document is applicable to textile end products (including consumer textile products, such as clothing made of fleece, shirts, trousers, blouse, etc.) and home textile end products (such as, blankets, rugs, curtains, etc.) which are composed of all fibres such as natural fibres, and man-made fibres, including mixture of the fibres that can be washed in a domestic washing machine.
This document is not applicable to fabrics and cut textile products. It does not cover the test for washing machines and detergents as well.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14083:2023(Main)
Greenhouse gases - Quantification and reporting of greenhouse gas emissions arising from transport chain operations (ISO 14083:2023)
SIST EN ISO 14083:2023

This document establishes a common methodology for the quantification and reporting of greenhouse gas (GHG) emissions arising from the operation of transport chains of passengers and freight.

  • Standard
    133 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15522-1:2023(Main)
Oil spill identification - Petroleum and petroleum related products - Part 1: Sampling
SIST EN 15522-1:2023

This document provides guidance on taking and handling samples related to oil spill identification in legal proceedings. Guidance is given on obtaining samples from both the spill and its potential source.
Preservation of evidence is an essential part of legal procedures and this document presents appropriate oil sampling procedures.
WARNING - The use of this document can involve hazardous materials, operations and equipment.
This document does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel prior to the application of the standard, and to determine the applicability of any other restrictions for this purpose.
IMPORTANT - Most countries have teams with specialists trained in sampling on board of ships. Do not take unnecessary risks, seek assistance from such teams where available.
NOTE   For the sake of clarity, the word ‘oil’ is used throughout this document. It can equally refer to crude oil, a petroleum product or mixtures of such.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15522-2:2023(Main)
Oil spill identification - Petroleum and petroleum related products - Part 2: Analytical method and interpretation of results based on GC-FID and GC-low resolution-MS analyses
SIST EN 15522-2:2023

This document specifies a method to identify and compare the compositional characteristics of oil samples. Specifically, it describes the detailed analytical and data processing methods for identifying the characteristics of spill samples and establishing their correlation to suspected source oils. Even when samples or data from suspected sources are not available for comparison, establishing the specific nature (e.g. refined petroleum, crude oil, waste oil, etc.) of the spilled oil still helps to constrain the possible source(s).
This methodology is restricted to petroleum related products containing a significant proportion of hydrocarbon-components with a boiling point above 150 °C. Examples are: crude oils, higher boiling condensates, diesel oils, residual bunker or heavy fuel oils, lubricants, and mixtures of bilge and sludge samples, as well as distillate fuels and blends. While the specific analytical methods are perhaps not appropriate for lower boiling oils (e.g. kerosene, jet fuel, or gasoline), the general concepts described in this methodology, i.e. statistical comparison of weathering-resistant diagnostic ratios, are applicable in spills involving these kinds of oils.
Paraffin based products (e.g. waxes, etc.) are outside the scope of this method because too many compounds are removed during the production process [37]. However, the method can be used to identify the type of product involved.
Although not directly intended for identifying oil recovered from groundwater, vegetation, wildlife/tissues, soil, or sediment matrices, they are not precluded. However, caution is needed as extractable compounds can be present in these matrices that alter and/or contribute additional compounds compared to the source sample. If unrecognized, the contribution from the matrix can lead to false “non-matches”. It is therefore advisable to analyse background sample(s) of the matrix that appear unoiled.
When analysing “non-oil” matrices additional sample preparation (e.g. clean-up) is often required prior to analysis and the extent to which the matrix affects the correlation achieved is to be considered. Whether the method is applicable for a specific matrix depends upon the oil concentration compared to the “matrix concentration”. In matrices containing high concentrations of oil, a positive match can still be concluded. In matrices containing lower concentrations of oil, a false “non-match” or an “inconclusive match” can result from matrix effects. Evaluation of possible matrix effects is beyond the scope of this document.

  • Standard
    219 pages
    English language
    sale 10% off
    e-Library read for
    1 day