Measurement of radioactivity - Determination of beta emitters activities - Test method using liquid scintillation counting (ISO 19361:2017)

ISO 19361:2017 applies to liquid scintillation counters and requires the preparation of a scintillation source obtained by mixing the test sample and a scintillation cocktail. The test sample can be liquid (aqueous or organic), or solid (particles or filter or planchet).
ISO 19361:2017describes the conditions for measuring the activity of beta emitter radionuclides by liquid scintillation counting[14][15].
The choice of the test method using liquid scintillation counting involves the consideration of the potential presence of other beta emitter radionuclides in the test sample. In this case, a specific sample treatment by separation or extraction is implemented to isolate the radionuclide of interest in order to avoid any interference with other beta-, alpha- and gamma-emitting radionuclides during the counting phase.
ISO 19361:2017 is applicable to all types of liquid samples having an activity concentration ranging from a few Bq·l−1 to 106 Bq·l−1. For a liquid test sample, it is possible to dilute liquid test samples in order to obtain a solution having an activity compatible with the measuring instrument. For solid samples, the activity of the prepared scintillation source shall be compatible with the measuring instrument.
The measurement range is related to the test method used: nature of test portion, preparation of the scintillator - test portion mixture, measuring assembly as well as to the presence of the co-existing activities due to interfering radionuclides.
Test portion preparations (such as distillation for 3H measurement, or benzene synthesis for 14C measurement, etc.) are outside the scope of this document and are described in specific test methods using liquid scintillation[2][3][4][5][6][7][8][9].

Nachweis der Radioaktivität - Bestimmung der Aktivität von Betastrahlern - Verfahren mit Flüssigszintillationszählung (ISO 19361:2017)

Dieses Dokument gilt für Flüssigszintillationszähler und erfordert die Herstellung einer Szintillationsprobe durch das Mischen der Prüfprobe und eines Szintillationscocktails. Die Prüfprobe kann flüssig (wässrig oder organisch) oder fest (Partikel, Filter oder FeststoffträgerN2) sein.
Dieses Dokument beschreibt die Bedingungen für die Messung der Aktivität von Betastrahlung emittierenden Radionukliden mittels Flüssigszintillationszählung [14], [15].
Bei der Wahl des Prüfverfahrens Flüssigszintillationszählung ist das mögliche Vorhandensein anderer Beta-strahlung emittierender Radionuklide in der Prüfprobe zu beachten. In diesem Fall kann eine spezifische Pro-benbehandlung durch Separation oder Extraktion zum Abtrennen des zu messenden Radionuklids erforder-lich sein, um eine Interferenz mit anderen Beta-, Alpha- oder Gammastrahlung emittierenden Radionukliden während der Messung zu vermeiden.
Dieses Dokument ist für alle flüssigen Probentypen mit einer Aktivitätskonzentration im Bereich von einigen wenigen Bq l–1 bis zu 106 Bq l–1 anwendbar. Für flüssige Prüfproben ist eine Verdünnung möglich, um eine Lösung mit einer Aktivität zu erhalten, die mit dem Messgerät kompatibel ist. Für feste Proben muss die Akti¬vität der präparierten Szintillationsprobe mit dem Messgerät kompatibel sein.
Der Messbereich ist abhängig vom gewählten Prüfverfahren: Herkunft der Prüfprobe, Herstellung der Szintil-lator-Prüfprobenmischung, Messaufbau sowie die Anwesenheit mit enthaltener Aktivität interferierenden Radionukliden.
Die Probenvorbereitung (wie die Destillation für 3H-Messungen oder Benzolsynthese für 14C-Messungen usw.) ist nicht Gegenstand dieses Dokuments und ist in spezifischen Prüfverfahren unter Verwendung der Flüssigszintillationsmethode oder Flüssigszintillationstechnik beschrieben [2], [3], [4], [5], [6], [7], [8], [9].

Mesurage de la radioactivité - Détermination de l'activité des radionucléides émetteurs bêta - Méthode d'essai par comptage des scintillations en milieu liquide (ISO 19361:2017)

ISO 19361:2017 s'applique aux compteurs à scintillations en milieu liquide et requiert la préparation d'une source scintillante obtenue en mélangeant la prise d'essai et un cocktail scintillant. La prise d'essai peut être liquide (aqueux ou organique) ou solide (particules, filtre ou planchette).
ISO 19361:2017 décrit les conditions de mesure de l'activité de radionucléides émetteurs bêta par comptage des scintillations en milieu liquide[14][15].
Le choix de la méthode d'essai utilisant le comptage des scintillations en milieu liquide implique de prendre en compte la présence potentielle d'autres radionucléides émetteurs bêta dans la prise d'essai. Dans ce cas, un traitement spécifique de l'échantillon, par séparation ou extraction, est mis en place pour isoler le radionucléide d'intérêt afin d'éviter toute interférence avec d'autres radionucléides émetteurs bêta, alpha et gamma pendant la phase de comptage.
ISO 19361:2017 est applicable à tous les types d'échantillons liquides ayant une activité volumique de quelques Bq·l−1 à 106 Bq·l−1. Pour une prise d'essai liquide, il est possible de diluer les prises d'essai liquides afin d'obtenir une solution ayant une activité compatible avec l'instrument de mesure. Pour les échantillons solides, l'activité de la source scintillante préparée doit être compatible avec l'instrument de mesure.
Le domaine de mesure est lié à la méthode d'essai utilisée: nature de la prise d'essai, préparation du mélange scintillant - prise d'essai, ensemble de mesure. Il est également lié à la présence d'activités coexistantes dues à des radionucléides interférents.
Les préparations de la prise d'essai (telles que la distillation pour le mesurage du 3H ou la synthèse du benzène pour le mesurage du 14C, etc.) ne font pas partie du domaine d'application du présent document et sont décrites dans des méthodes d'essai spécifiques utilisant la scintillation en milieu liquide[2][3][4][5][6][7][8][9].

Merjenje radioaktivnosti - Ugotavljanje aktivnosti oddajnikov beta - Preskusna metoda s tekočinskim scintilacijskim štetjem (ISO 19361:2017)

General Information

Status
Published
Publication Date
25-Feb-2020
Withdrawal Date
30-Aug-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Feb-2020
Due Date
28-Jun-2021
Completion Date
26-Feb-2020

Buy Standard

Standard
EN ISO 19361:2020 - BARVE
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19361:2019
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19361:2020
01-maj-2020
Merjenje radioaktivnosti - Ugotavljanje aktivnosti oddajnikov beta - Preskusna
metoda s tekočinskim scintilacijskim štetjem (ISO 19361:2017)
Measurement of radioactivity - Determination of beta emitters activities - Test method
using liquid scintillation counting (ISO 19361:2017)
Nachweis der Radioaktivität - Bestimmung der Aktivität von Betastrahlern - Verfahren mit
Flüssigszintillationszählung (ISO 19361:2017)
Mesurage de la radioactivité - Détermination de l'activité des radionucléides émetteurs
bêta - Méthode d'essai par comptage des scintillations en milieu liquide (ISO
19361:2017)
Ta slovenski standard je istoveten z: EN ISO 19361:2020
ICS:
17.240 Merjenje sevanja Radiation measurements
SIST EN ISO 19361:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19361:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 19361:2020


EN ISO 19361
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2020
EUROPÄISCHE NORM
ICS 17.240
English Version

Measurement of radioactivity - Determination of beta
emitters activities - Test method using liquid scintillation
counting (ISO 19361:2017)
Mesurage de la radioactivité - Détermination de Nachweis der Radioaktivität - Bestimmung der
l'activité des radionucléides émetteurs bêta - Méthode Aktivität von Betastrahlern - Verfahren mit
d'essai par comptage des scintillations en milieu Flüssigszintillationszählung (ISO 19361:2017)
liquide (ISO 19361:2017)
This European Standard was approved by CEN on 7 January 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19361:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19361:2020
EN ISO 19361:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19361:2020
EN ISO 19361:2020 (E)
European foreword
The text of ISO 19361:2017 has been prepared by Technical Committee ISO/TC 85 "Nuclear energy,
nuclear technologies, and radiological protection” of the International Organization for Standardization
(ISO) and has been taken over as EN ISO 19361:2020 by Technical Committee CEN/TC 430 “Nuclear
energy, nuclear technologies, and radiological protection” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 19361:2017 has been approved by CEN as EN ISO
...

SLOVENSKI STANDARD
oSIST prEN ISO 19361:2019
01-december-2019
Merjenje radioaktivnosti - Ugotavljanje aktivnosti oddajnikov beta - Preskusna
metoda s tekočinskim scintilacijskim štetjem (ISO 19361:2017)
Measurement of radioactivity - Determination of beta emitters activities - Test method
using liquid scintillation counting (ISO 19361:2017)
Nachweis der Radioaktivität - Bestimmung der Aktivität von Betastrahlern - Verfahren mit
Flüssigszintillationszählung (ISO 19361:2017)
Mesurage de la radioactivité - Détermination de l'activité des radionucléides émetteurs
bêta - Méthode d'essai par comptage des scintillations en milieu liquide (ISO
19361:2017)
Ta slovenski standard je istoveten z: prEN ISO 19361
ICS:
17.240 Merjenje sevanja Radiation measurements
oSIST prEN ISO 19361:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19361:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19361:2019
INTERNATIONAL ISO
STANDARD 19361
First edition
2017-08
Measurement of radioactivity —
Determination of beta emitters
activities — Test method using liquid
scintillation counting
Mesurage de la radioactivité — Détermination de l’activité des
radionucléides émetteurs bêta — Méthode d’essai par comptage des
scintillations en milieu liquide
Reference number
ISO 19361:2017(E)
©
ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19361:2019
ISO 19361:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19361:2019
ISO 19361:2017(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normatives references . 1
3 Terms and definitions . 1
4 Symbols, abbreviations and units . 2
5 Principle . 2
6 Reagents and equipment . 3
6.1 Reagents. 3
6.1.1 Blank material . 3
6.1.2 Calibration source solutions . 3
6.1.3 Scintillation solution. 4
6.1.4 Quenching agent.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.