iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 1683:2015

(Main)

Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015)

Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015)

ISO 1683:2015 specifies reference values used in acoustics, in order to establish a uniform basis for the expression of acoustical and vibratory levels.
The reference values are mandatory for use in acoustics for sounds in air and other gases, sounds in water and other liquids, and for structure-borne sound, but can also be used in other applications.

Akustik - Bevorzugte Bezugswerte für Pegel in der Akustik und Schwingungstechnik (ISO 1683:2015)

Diese Internationale Norm legt Bezugswerte für die Anwendung in der Akustik fest, um eine einheitliche Grundlage für die Angabe von Pegeln in der Akustik und Schwingungstechnik zu schaffen.
Die Bezugswerte sind verpflichtend auf dem Gebiet der Akustik für Schall in Luft und anderen Gasen, in Wasser und anderen Flüssigkeiten sowie für Körperschall; diese dürfen jedoch auch auf anderen Gebieten Anwendung finden.

Acoustique - Valeurs de référence recommandées pour les niveaux acoustiques et vibratoires (ISO 1683:2015)

ISO 1683:2015 spécifie des valeurs de référence utilisées en acoustique, de façon à établir une base uniforme d'expression des niveaux acoustiques et vibratoires.
Ces valeurs de référence sont d'utilisation obligatoire en acoustique pour les sons émis dans l'air et autres gaz, pour ceux émis dans l'eau et autres liquides, et pour les bruits de structure, mais elles peuvent également être utilisées dans d'autres applications.

Akustika - Prednostne referenčne vrednosti akustičnih ravni in ravni vibracij (ISO 1683:2015)

Ta mednarodni standard določa referenčne vrednosti v akustiki za določanje enotne podlage za izražanje akustičnih ravni in ravni vibracij. Uporaba referenčnih vrednosti je obvezna v akustiki za zvoke v zraku in drugih plinih, zvoke v vodi in drugih tekočinah ter za strukturne zvoke, vendar je mogoča tudi na drugih področjih uporabe.

General Information

Status
Published
Publication Date
19-May-2015
Withdrawal Date
29-Nov-2015
ICS
17.140.01 - Acoustic measurements and noise abatement in general
Technical Committee
CEN/TC 211 - Acuostics
Drafting Committee
CEN/TC 211 - Acuostics
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-May-2015
Completion Date
20-May-2015
Directive
89/106/EEC - Construction products
Mandate
M/BC/CEN/91/8 - CPD: Protection against noise
Ref Project
SIST EN ISO 1683:2015 - Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2015)

Relations

Replaces
EN ISO 1683:2008 - Acoustics - Preferred reference values for acoustical and vibratory levels (ISO 1683:2008)
Effective Date
31-Jul-2013

Buy Standard

EN ISO 1683:2015EN ISO 1683:2015
PreviousNext
Standard
EN ISO 1683:2015
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1683:2015
01-oktober-2015
1DGRPHãþD
SIST EN ISO 1683:2008
$NXVWLND3UHGQRVWQHUHIHUHQþQHYUHGQRVWLDNXVWLþQLKUDYQLLQUDYQLYLEUDFLM ,62

Acoustics - Preferred reference values for acoustical and vibratory levels (ISO
1683:2015)
Akustik - Bevorzugte Bezugswerte für Pegel in der Akustik und Schwingungstechnik
(ISO 1683:2015)
Acoustique - Valeurs de référence recommandées pour les niveaux acoustiques et
vibratoires (ISO 1683:2015)
Ta slovenski standard je istoveten z: EN ISO 1683:2015
ICS:
17.140.01 $NXVWLþQDPHUMHQMDLQ Acoustic measurements and
EODåHQMHKUXSDQDVSORãQR noise abatement in general
SIST EN ISO 1683:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1683:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 1683:2015

EUROPEAN STANDARD
EN ISO 1683

NORME EUROPÉENNE

EUROPÄISCHE NORM
May 2015
ICS 17.140.01 Supersedes EN ISO 1683:2008
English Version
Acoustics - Preferred reference values for acoustical and
vibratory levels (ISO 1683:2015)
Acoustique - Valeurs de référence recommandées pour les Akustik - Bevorzugte Bezugswerte für Pegel in der Akustik
niveaux acoustiques et vibratoires (ISO 1683:2015) und Schwingungstechnik (ISO 1683:2015)
This European Standard was approved by CEN on 30 April 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1683:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1683:2015
EN ISO 1683:2015 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 1683:2015
EN ISO 1683:2015 (E)
Foreword
This document (EN ISO 1683:2015) has been prepared by Technical Committee ISO/TC 43 “Acoustics” in
collaboration with Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn
at the latest by November 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1683:2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 1683:2015 has been approved by CEN as EN ISO 1683:2015 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 1683:2015

---------------------- Page: 6 ----------------------

SIST EN ISO 1683:2015
INTERNATIONAL ISO
STANDARD 1683
Third edition
2015-05-15
Acoustics — Preferred reference values
for acoustical and vibratory levels
Acoustique — Valeurs de référence recommandées pour les niveaux
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 26101-1:2022(Main)
Acoustics - Test methods for the qualification of the acoustic environment - Part 1: Qualification of free-field environments (ISO 26101-1:2021)
SIST EN ISO 26101-1:2022

This document specifies methodology for qualifying acoustic spaces as anechoic and hemi-anechoic spaces meeting the requirements of a free sound field.
This document specifies discrete-frequency and broad-band test methods for quantifying the performance of anechoic and hemi-anechoic spaces, defines the qualification procedure for an omni-directional sound source suitable for free-field qualification, gives details of how to present the results and describes uncertainties of measurement.
This document has been developed for qualifying anechoic and hemi-anechoic spaces for a variety of acoustical measurement purposes. It is expected that, over time, various standards and test codes will refer to this document in order to qualify an anechoic or hemi-anechoic space for a particular measurement. Annex D provides guidelines for the specification of test parameters and qualification criteria for referencing documents.
In the absence of specific requirements or criteria, Annex A provides qualification criteria and measurement requirements to qualify anechoic and hemi-anechoic spaces for general purpose acoustical measurements.
This document describes the divergence loss method for measuring the free sound field performance of an acoustic environment.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21388:2021(Main)
Acoustics - Hearing aid fitting management (HAFM) (ISO 21388:2020)
SIST EN ISO 21388:2021

This document applies to hearing aid fitting management (HAFM) services offered by hearing aid professionals (HAP) when providing benefit for their clients. The provision of hearing aids relies on the knowledge and practices of a hearing aid professional, to ensure the proper fitting and adequate service in the interest of the client with hearing loss.
This document specifies general processes of HAFM from the client profile to the follow-up through administering, organising and controlling hearing aid fitting through all stages. It also specifies important preconditions such as education, facilities and systems that are required to ensure proper services.
The focus of this document is the services offered to the majority of adult clients with hearing impairment. It is recognized that certain populations with hearing loss such as children, persons with other disabilities or persons with implantable devices can require services outside the scope of this document. This document generally applies to air conduction hearing aids and for the most part also to bone conduction devices.
Hearing loss can be a consequence of serious medical conditions. Hearing aid professionals are not in a position to diagnose or treat such conditions. When assisting clients seeking hearing rehabilitation without prior medical examination, hearing aid professionals are expected to be observant of symptoms of such conditions and refer to proper medical care.
Further to the main body of the document, which specifies the HAFM requirements and processes, several informative annexes are provided. Appropriate education of hearing aid professionals is vital for exercising HAFM. Annex A defines the competencies required for the HAFM processes. Annex B offers a recommended curriculum for the education of hearing aid professionals. Annex C is an example of an appropriate fitting room. Annex D gives guidance on the referral of clients for medical or other specialist examination and treatment. Annex E is a recommendation for important information to be exchanged with the client during the process of HAFM. Annex F is a comprehensive terminology list offering definitions of the most current terms related to HAFM.
It is the intention that these annexes be helpful to those who wish to deliver HAFM of the highest quality.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11904-2:2021(Main)
Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2021)
SIST EN ISO 11904-2:2021

This document specifies basic framework measurement methods for sound immission from sound sources placed close to the ear. These measurements are carried out with a manikin, equipped with ear simulators including microphones. The measured values are subsequently converted into corresponding free-field or diffuse-field levels. The results are given as free-field related or diffuse-field related equivalent continuous A-weighted sound pressure levels. The technique is denoted the manikin technique.
This document is applicable to exposure to sound from sources close to the ear, for example during equipment tests or at the workplace to sound from earphones or hearing protectors with audio communication facilities.
This document is applicable in the frequency range from 20 Hz to 10 kHz. For frequencies above 10 kHz, ISO 11904-1 can be used.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6926:2016/A1:2020(Amendment)
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels - Amendment 1 (ISO 6926:2016/Amd 1:2020)
SIST EN ISO 6926:2016/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3743-2:2019(Main)
Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields - Part 2: Methods for special reverberation test rooms (ISO 3743-2:2018)
SIST EN ISO 3743-2:2019

ISO 3743-2:2018 specifies a relatively simple engineering method for determining the sound power levels of small, movable noise sources. The methods specified in this document are suitable for measurements of all types of noise within a specified frequency range, except impulsive noise consisting of isolated bursts of sound energy which are covered by ISO 3744 and ISO 3745.
NOTE       A classification of different types of noise is given in ISO 12001.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3740:2019(Main)
Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2019)
SIST EN ISO 3740:2019

ISO 3740:2019 gives guidance for the use of a set of twelve basic International Standards (see Tables 1, 2 and 3) describing various methods for determining sound power levels from all types of machinery, equipment and products. It provides guidance on the selection of one or more of these standards, appropriate to any particular type of sound source, measurement environment and desired accuracy. The guidance given applies to airborne sound. It is for use in the preparation of noise test codes (see ISO 12001) and also in noise emission testing where no specific noise test code exists. Such standardized noise test codes can recommend the application of particular basic International Standard(s) and give detailed requirements on mounting and operating conditions for a particular family to which the machine under test belongs, in accordance with general principles given in the basic standards.
ISO 3740:2019 is not intended to replace any of the details of, or add any additional requirements to, the individual test methods in the basic International Standards referenced.
NOTE 1    Two quantities which complement each other can be used to describe the noise emission of machinery, equipment and products. One is the emission sound pressure level at a specified position and the other is the sound power level. The International Standards which describe the basic methods for determining emission sound pressure levels at work stations and at other specified positions are ISO 11200 to ISO 11205 (References [20] to [25]).
NOTE 2    The sound energy level mentioned in ISO 3741 to ISO 3747 is not addressed in this document as it is not mentioned in any legal requirement. Its application is limited to very special cases of a single burst of sound energy or transient sound defined in ISO 12001.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3745:2012/A1:2017(Amendment)
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms - Amendment 1 (ISO 3745:2012/Amd 1:2017)
SIST EN ISO 3745:2012/A1:2017
  • Amendment
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6926:2016(Main)
Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2016)
SIST EN ISO 6926:2016

ISO 6926:2016 specifies the acoustical performance requirements for reference sound sources:
-      temporal steadiness (stability) of the sound power output;
-      spectral characteristics;
-      directivity.
Temporal steadiness is defined in terms of the standard deviation of repeatability (see 5.2). The spectral characteristics can be verified in either a hemi-anechoic room or a reverberation test room from measurements of the frequency band sound power levels in accordance with this International Standard (see 5.4). The performance requirements on directivity index can only be verified in a hemi-anechoic room (see 5.5.)
ISO 6926:2016 also specifies procedures for providing level calibration data and uncertainty on a sound source intended for use as a reference sound source in terms of its sound power level under reference meteorological conditions as defined in Clause 4 in octave and in one-third-octave bands, and with frequency weighting A.
ISO 6926:2016 is titled as a calibration standard even though the method is conducted in a testing laboratory and the level calibration results are not directly traceable to national standards of measure in a strict metrological sense. Testing laboratories performing this method are not expected to meet all requirements normally associated with a calibration laboratory.
NOTE          ISO/IEC 17025[15] specifies different requirements for the competence of testing laboratories and calibration laboratories respectively. Laboratories testing reference sound sources in accordance with this International Standard would typically comply with the requirements for testing laboratories but not necessarily with those for calibration laboratories.
ISO 6926:2016 specifies methods to calibrate reference sound sources not only in a free field over a reflecting plane but also in reverberation test rooms at different distances from the boundary surfaces. For the position of the reference sound source on one reflecting plane, the two different test environments mentioned above are considered equivalent for frequency bands above or equal to 200 Hz. At 160 Hz and below, some systematic differences can occur (see 11.2). For frequencies below 100 Hz, an alternative calibration method using sound intensity is given.
The sound source can either be placed directly on the floor or mounted on a stand to be used at a certain elevation above the floor. According to this International Standard, stand-mounted sources are calibrated in reverberation test rooms. Floor-mounted sources are either calibrated in hemi-anechoic or in reverberation test rooms. For floor-mounted sources in hemi-anechoic rooms, this International Standard is valid only for sources whose maximum vertical dimension is less than 0,5 m and whose maximum horizontal dimension is less than 0,8 m. According to this International Standard, only floor-mounted reference sound sources can be used when carrying out measurements on a measurement surface. For reference sound sources to be used or calibrated under reverberant conditions, no such restrictions on maximum dimensions apply.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3745:2012(Main)
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi-anechoic rooms (ISO 3745:2012)
SIST EN ISO 3745:2012

2011-06-08 EMA: draft for // vote received in ISO/CS (see notification of 2011-06-07 in dataservice).

  • Standard
    73 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    69 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3746:2010(Main)
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
SIST EN ISO 3746:2011

ISO 3746:2010 specifies methods for determining the sound power level or sound energy level of a noise source from sound pressure levels measured on a surface enveloping a noise source (machinery or equipment) in a test environment for which requirements are given. The sound power level (or, in the case of noise bursts or transient noise emission, the sound energy level) produced by the noise source with frequency A-weighting applied is calculated using those measurements.
The methods specified in ISO 3746:2010 are suitable for all types of noise (steady, non-steady, fluctuating, isolated bursts of sound energy, etc.) defined in ISO 12001.
ISO 3746:2010 is applicable to all types and sizes of noise source (e.g. stationary or slowly moving plant, installation, machine, component or sub-assembly), provided the conditions for the measurements can be met.
The test environments that are applicable for measurements made in accordance with ISO 3746:2010 can be located indoors or outdoors, with one or more sound-reflecting planes present on or near which the noise source under test is mounted.
Information is given on the uncertainty of the sound power levels and sound energy levels determined in accordance with ISO 3746:2010, for measurements made with frequency A-weighting applied. The uncertainty conforms with that of ISO 12001:1996, accuracy grade 3 (survey grade).

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    52 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day