EN 14071:2015+A1:2019

LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment

This European Standard specifies the design, testing and inspection requirements for pressure relief valve isolating devices, valve manifolds, vent pipes and system assemblies which are, where necessary, used with pressure relief valves for use in static pressure vessels for Liquefied Petroleum Gas (LPG) service.
This European Standard addresses both prototype testing and production testing of isolating devices and PRV manifolds.
Pressure relief valves for LPG pressure vessels are specified in EN 14129:2014.

Flüssiggas-Geräte und Ausrüstungsteile - Druckentlastungsventile für Druckbehälter für Flüssiggas (LPG) - Zusatzausrüstung

Diese Europäische Norm legt Anforderungen an die Auslegung, Prüfungen und Inspektion von Absperreinrichtungen für Druckentlastungsventile, Ventilsammelleitungen, Entlüftungsrohren und Systembaugruppen fest, welche bei Bedarf zusammen mit Druckentlastungsventilen für Druckbehälter für den Betrieb mit Flüssiggas (LPG, en: Liquefied Petroleum Gas) verwendet werden.
Druckentlastungsventile für LPG-Behälter sind in EN 14129 festgelegt.

Équipements pour GPL et leurs accessoires - Soupapes de sécurité des réservoirs de gaz de pétrole liquéfié (GPL) - Équipement auxiliaire

La présente Norme européenne spécifie les exigences en matière de conception, essais et inspection relatives aux clapets porte-soupape pour soupapes de sécurité, collecteurs de soupapes, prolongateurs de soupapes et systèmes d'assemblage utilisés, lorsque nécessaire, avec les soupapes de sécurité destinées à être installées sur des réservoirs sous pression statiques contenant du gaz de pétrole liquéfié (GPL).
La présente Norme européenne traite à la fois des essais sur prototype et des essais de production des clapets porte-soupape et des collecteurs de soupape.
Les soupapes de sécurité pour réservoirs GPL sous pression sont spécifiées dans l'EN 14129:2014.

Oprema in pribor za utekočinjeni naftni plin (UNP) - Varnostni ventili za tlačne posode za UNP - Pomožna oprema (vključno z dopolnilom A1)

Ta evropski standard določa zahteve glede projektiranja, preskušanja in pregledovanja varnostnih ventilov za tlačne posode, razdelilnikov, odzračevalnih cevi in sistemskih sklopov, ki se po potrebi uporabljajo z ventili za tlačne posode za utekočinjeni naftni plin (UNP).
Ta evropski standard obravnava preskušanje prototipov in proizvodno preskušanje izolacijskih naprav ter razdelilnikov ventilov za tlačne posode.
Varnostni ventili za tlačne posode za UNP so določeni v standardu EN 14129:2014.

General Information

• Status: Published
• Publication Date: 30-Apr-2019
• Withdrawal Date: 29-Nov-2019
• ICS: 23.060.40 - Pressure regulators
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 2 - Design and manufacture of accessories (valves, gauges, fittings) for LPG pressure vessels designed in WG1
• Current Stage: 9000 - Start of review/2 Year Review Enquiry - Review Enquiry
• Start Date: 13-May-2020
• Completion Date: 13-May-2020
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 14071:2015+A1:2019 - LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment

Relations

• Merged From: EN 14071:2015 - LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
• Effective Date: 18-Jan-2023
• Merged From: EN 14071:2015/FprA1 - LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
• Effective Date: 20-Feb-2019
• Revised: FprEN 14071 - LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
• Effective Date: 11-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14071:2015+A1:2019
01-september-2019
Nadomešča:
SIST EN 14071:2015
Oprema in pribor za utekočinjeni naftni plin (UNP) - Varnostni ventili za tlačne
posode za UNP - Pomožna oprema (vključno z dopolnilom A1)
LPG equipment and accessories - Pressure relief valves for LPG pressure vessels -
Ancillary equipment
Flüssiggas-Geräte und Ausrüstungsteile - Druckentlastungsventile für Druckbehälter für
Flüssiggas (LPG) - Zusatzausrüstung
Équipements pour GPL et leurs accessoires - Soupapes de sécurité des réservoirs de
gaz de pétrole liquéfié (GPL) - Équipement auxiliaire
Ta slovenski standard je istoveten z: EN 14071:2015+A1:2019
ICS:
23.020.32 Tlačne posode Pressure vessels
23.060.40 Tlačni regulatorji Pressure regulators
SIST EN 14071:2015+A1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14071:2015+A1:2019

---------------------- Page: 2 ----------------------

SIST EN 14071:2015+A1:2019


EN 14071:2015+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2019
EUROPÄISCHE NORM
ICS 23.060.40
English Version

LPG equipment and accessories - Pressure relief valves for
LPG pressure vessels - Ancillary equipment
Équipements pour GPL et leurs accessoires - Soupapes Flüssiggas-Geräte und Ausrüstungsteile -
de sécurité des réservoirs de gaz de pétrole liquéfié Druckentlastungsventile für Druckbehälter für
(GPL) - Équipement auxiliaire Flüssiggas (LPG) - Zusatzausrüstung
This European Standard was approved by CEN on 5 March 2015 and includes Amendment 1 approved by CEN on 1 March 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14071:2015+A1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14071:2015+A1:2019
EN 14071:2015+A1:2019 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Operating conditions . 9
5 Materials . 9
5.1 General . 9
5.2 Metallic materials . 10
5.3 Non-metallic components . 10
5.4 Lubricants, sealants, and adhesives .
...