Petroleum and natural gas industries - Site-specific assessment of mobile offshore units - Part 3: Floating unit (ISO 19905-3:2017)

ISO 19905-3 specifies requirements and gives guidance for the site-specific assessment of mobile floating units for use in the petroleum and natural gas industries. It addresses the installed phase, at a specific site, of manned non-evacuated, manned evacuated and unmanned mobile floating units.
ISO 19905-3 addresses mobile floating units that are monohull (e.g. ship-shaped vessels or barges); column-stabilized, commonly referred to as semi-submersibles; or other hull forms (e.g. cylindrical/conical shaped). It is not applicable to tension leg platforms. Stationkeeping can be provided by a mooring system, a thruster assisted mooring system, or dynamic positioning. The function of the unit can be broad, including drilling, floatel, tender assist, etc. In situations where hydrocarbons are being produced, there can be additional requirements.
The requirements of ISO 19905-3 apply to the hull and stationkeeping system for all types of mobile units. The activity specific operating guideline document requirements can be modified to be appropriate to the situation being assessed.
ISO 19905-3 does not address all site considerations, and certain specific locations can require additional assessment.
ISO 19905-3 is applicable only to mobile floating units that are structurally sound and adequately maintained, which is normally demonstrated through holding a valid RCS classification certificate.
ISO 19905-3 does not address design, transportation to and from site, or installation and removal from site.
ISO 19905-3 sets out the requirements for site-specific assessments, but generally relies on other documents to supply the details of how the assessments are to be undertaken. In general:
-      ISO 19901‑7 is referenced for the assessment of the stationkeeping system;
-      ISO 19904‑1 is referenced to determine the metocean actions on the unit;
-      ISO 19906 is referenced for arctic and cold regions;
-      the hull structure and airgap are assessed by use of a comparison between the site-specific metocean conditions and its design conditions, as set out in the RCS approved operations manual;
-      ISO 13624‑1 and ISO/TR 13624‑2[1] are referenced for the assessment of the marine drilling riser of mobile floating drilling units. Equivalent alternative methodologies can be used;
-      IMCA M 220[5] is referenced for developing an activity specific operating guidelines. Agreed alternative methodologies can be used.
NOTE 1    The scope of ISO 19904‑1 specifically states that its requirements do not apply to mobile units, but the methodologies given for assessing metocean actions can be used.
NOTE 2    RCS rules and the IMO MODU code[4] provide guidance for design and general operation of mobile floating units.

Erdöl- und Erdgasindustrie - Beurteilung von mobilen Offshore Einheiten bezüglich ihres Einsatzgebietes - Teil 3: Schwimmende Einheiten (ISO 19905-3:2017)

Industries du pétrole et du gaz naturel - Évaluation spécifique au site d'unités mobiles en mer - Partie 3: Unité flottante (ISO 19905-3:2017)

ISO 19905-3:2017 spécifie les exigences et les lignes directrices pour l'évaluation spécifique au site d'unités mobiles flottantes à utiliser dans les industries du pétrole et du gaz naturel. Elle traite de la phase installée, au niveau d'un site spécifique, d'unités mobiles flottantes occupées par du personnel non évacuées, occupées par du personnel évacuées et non occupées par du personnel.
ISO 19905-3:2017 traite des unités mobiles flottantes monocoques (par exemple structures à profil de bateau ou barges); stabilisées par des colonnes, souvent désignées par structures semi-submersibles; ou ayant d'autres formes de coque (par exemple cylindriques/coniques). Elle n'est pas applicable aux plates-formes à ancrage tendu. Le maintien en position peut être assuré par un système d'ancrage, un système d'ancrage assisté par des propulseurs, ou un système de positionnement dynamique. L'unité peut avoir plusieurs fonctions, comprenant des fonctions de forage, d'hôtel flottant, de barge, etc. Dans les situations où des hydrocarbures sont produits, des exigences supplémentaires peuvent s'appliquer.
Les exigences du présent document s'appliquent à la coque et au système de maintien en position de tous les types d'unités mobiles. Il est possible de modifier les exigences du document d'instructions d'exploitation spécifiques à l'activité dans le but de les adapter à la situation faisant l'objet de l'évaluation.
ISO 19905-3:2017 ne traite pas de toutes les considérations du site, et il est possible que certains emplacements nécessitent une évaluation supplémentaire.
ISO 19905-3:2017 n'est applicable qu'aux unités mobiles flottantes dont la structure est saine et entretenue de manière adéquate, ce qui est normalement démontré par la tenue à jour d'un certificat de classification en cours de validité, délivré par une société de classification reconnue (RCS).
ISO 19905-3:2017 ne traite pas de la conception, du transport vers et depuis un site ou de l'installation et du retrait du site.
ISO 19905-3:2017 spécifie les exigences pour des évaluations spécifiques aux sites, mais s'appuie généralement sur d'autres documents pour fournir les informations détaillées sur la manière dont les évaluations doivent être effectuées. En général:
-      l'ISO 19901‑7 est citée en référence pour l'évaluation du système de maintien en position;
-      l'ISO 19904‑1 est citée en référence pour la détermination des actions océano-météorologiques sur l'unité;
-      l'ISO 19906 est citée en référence pour les régions arctiques et froides;
-      la structure et le tirant d'eau de la coque sont évalués en procédant à une comparaison entre les dispositions océano-météorologiques spécifiques au site et les conditions de conception de la coque, comme indiqué dans le manuel d'exploitation approuvé par une société de classification reconnue (RCS);
-      l'ISO 13624‑1 et l'ISO/TR 13624‑2[1] sont citées en référence pour l'évaluation des tubes prolongateurs pour les forages en mer des unités de forage mobiles flottantes. Il est possible d'utiliser d'autres méthodologies équivalentes;
-      l'IMCA M 220[5] est citée en référence pour l'élaboration d'un document d'instructions d'exploitation spécifique à l'activité. Il est possible d'utiliser d'autres méthodologies ayant fait l'objet d'un accord.
NOTE 1    Le domaine d'application de l'ISO 19904‑1 stipule spécifiquement que ses exigences ne s'appliquent pas aux unités mobiles, mais les méthodologies données pour l'évaluation des acti

Industrija za predelavo nafte in zemeljskega plina - Ocenjevanje premičnih naftnih ploščadi na področju postavitve - 3. del: Plavajoča enota (ISO 19905-3:2017)

Standard ISO 19905-3 določa zahteve in podaja smernice za ocenjevanje premičnih plavajočih enot na področju postavitve za uporabo v industriji za predelavo nafte in zemeljskega plina. Obravnava fazo postavitve na določenem področju za neevakuirane premične plavajoče enote s posadko, evakuirane premične plavajoče enote s posadko in za premične plavajoče enote brez posadke. Standard ISO 19905-3 obravnava premične plavajoče enote, ki imajo en trup (npr. plovila v obliki plavila ali plovila); ki so stolpično stabilizirana in se običajno imenujejo enote, ki so pol pod vodo; ali ki imajo druge oblike trupa (npr. cilindrične ali stožčaste oblike). Ne uporablja se za navpično zasidrane ploščadi. Vzdrževalne sisteme se lahko zagotovi s sistemi zasidranja, sistemi motorno podprtega zasidranja ali z dinamičnim pozicioniranjem. Enota lahko opravlja raznovrstne funkcije, vključno z vrtanjem, plovnimi hoteli, ponudniki pomoči itd. V primerih proizvodnje ogljikovodikov lahko obstajajo dodatne zahteve. Zahteve iz standarda ISO 19905-3 veljajo za trupe in vzdrževalne sisteme za vse vrste premičnih enot. Zahteve dokumenta za delovanje, ki je specifično za dejavnost, je mogoče spremeniti tako, da ustrezajo primeru, ki se jo ocenjuje.
Standard ISO 19905-3 ne obravnava vseh pogojev mesta uporabe in določene specifične lokacije lahko zahtevajo dodatno ocenjevanje.
Standard ISO 19905-3 se uporablja samo za premične plavajoče enote, ki so strukturno trdne in ustrezno vzdrževane, kar se običajno izkazuje z veljavnim certifikatom klasifikacije RCS.
Standard ISO 19905-3 ne obravnava načrtovanja, prevoza na mesto ali z njega ali namestitve na mesto in odstranitve z njega.
Standard ISO 19905-3 podaja zahteve za oceno na mestu postavitve, vendar se na splošno sklicuje na druge dokumente glede podajanja podrobnosti o tem, kako naj poteka ocenjevanje. Splošno:
– sklic na standard ISO 19901‑7 za ocenjevanje vzdrževalnega sistema;
– sklic na standard ISO 19904‑1 za določanje meteoroloških in oceanografskih ukrepov za enoto;
– sklic na standard ISO 19906 za arktična in hladna območja;
– struktura trupa in zračna reža se ocenita s primerjavo med meteorološkimi in oceanografskimi pogoji, ki so specifični za mesto postavitve, ter njihovimi določenimi pogoji, kot je opredeljeno v s strani RCS odobrenih navodilih za uporabo;
– sklic na standarda ISO 13624‑1 in ISO/TR 13624‑2[1] za ocenjevanje morskih dvižnih cevi za vrtanje na premičnih plavajočih vrtalnih enotah. Uporabijo se lahko tudi enakovredne nadomestne metodologije;
– sklic na standard IMCA M 220[5] za razvoj smernic za delovanje, ki so specifične za dejavnost. Uporabijo se lahko tudi dogovorjene nadomestne metodologije.
OPOMBA 1: Področje uporabe standarda ISO 19904‑1 izrecno navaja, da zahteve standarda ne veljajo za premične enote, vendar je mogoče uporabiti metodologije, ki so podane za ocenjevanje meteoroloških in oceanografskih dejanj.
OPOMBA 2: Pravila RCS in kodeks IMO MODU [4] podajajo napotke za načrtovanje in upravljanje premičnih plavajočih enot.

General Information

Status
Withdrawn
Publication Date
15-Oct-2019
Withdrawal Date
28-Jun-2022
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
29-Jun-2022

Relations

Buy Standard

Standard
EN ISO 19905-3:2020 - BARVE
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 19905-3:2019 - BARVE
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19905-3:2020
01-januar-2020
Industrija za predelavo nafte in zemeljskega plina - Ocenjevanje premičnih naftnih
ploščadi na področju postavitve - 3. del: Plavajoča enota (ISO 19905-3:2017)
Petroleum and natural gas industries - Site-specific assessment of mobile offshore units
- Part 3: Floating unit (ISO 19905-3:2017)
Erdöl- und Erdgasindustrie - Beurteilung von mobilen Offshore Einheiten bezüglich ihres
Einsatzgebietes - Teil 3: Schwimmende Einheiten (ISO 19905-3:2017)
Industries du pétrole et du gaz naturel - Évaluation spécifique au site d'unités mobiles en
mer - Partie 3: Unité flottante (ISO 19905-3:2017)
Ta slovenski standard je istoveten z: EN ISO 19905-3:2019
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
SIST EN ISO 19905-3:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 19905-3:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 19905-3:2020


EN ISO 19905-3
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2019
EUROPÄISCHE NORM
ICS 75.180.10
English Version

Petroleum and natural gas industries - Site-specific
assessment of mobile offshore units - Part 3: Floating unit
(ISO 19905-3:2017)
Industries du pétrole et du gaz naturel - Évaluation Erdöl- und Erdgasindustrie - Beurteilung von mobilen
spécifique au site d'unités mobiles en mer - Partie 3: Offshore Einheiten bezüglich ihres Einsatzgebietes -
Unité flottante (ISO 19905-3:2017) Teil 3: Schwimmende Einheiten (ISO 19905-3:2017)
This European Standard was approved by CEN on 9 September 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19905-3:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 19905-3:2020
EN ISO 19905-3:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 19905-3:2020
EN ISO 19905-3:2019 (E)
European foreword
The text of ISO 19905-3:2017 has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 19905-3:2019
by Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
...

SLOVENSKI STANDARD
oSIST prEN ISO 19905-3:2019
01-julij-2019
Industrija za predelavo nafte in zemeljskega plina - Ocenjevanje premičnih naftnih
ploščadi na področju postavitve - 3. del: Plavajoča enota (ISO 19905-3:2017)
Petroleum and natural gas industries - Site-specific assessment of mobile offshore units
- Part 3: Floating unit (ISO 19905-3:2017)
Industries du pétrole et du gaz naturel - Évaluation spécifique au site d'unités mobiles en
mer - Partie 3: Unité flottante (ISO 19905-3:2017)
Ta slovenski standard je istoveten z: prEN ISO 19905-3
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
oSIST prEN ISO 19905-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19905-3:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19905-3:2019
INTERNATIONAL ISO
STANDARD 19905-3
First edition
2017-10
Petroleum and natural gas
industries — Site-specific assessment
of mobile offshore units —
Part 3:
Floating unit
Industries du pétrole et du gaz naturel — Évaluation spécifique au
site d'unités mobiles en mer —
Partie 3: Unité flottante
Reference number
ISO 19905-3:2017(E)
©
ISO 2017

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19905-3:2019
ISO 19905-3:2017(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19905-3:2019
ISO 19905-3:2017(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 2
3  Terms and definitions . 2
4 Abbreviated terms . 4
5 Overall considerations . 5
5.1 General . 5
5.1.1 Competency . 5
5.1.2 Planning . 5
5.1.3 Reporting . 5
5.1.4 Regulations . 5
5.1.5 Classification of unit . 5
5.2 Assessment .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.