Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration

This European Standard specifies a method for determining the fire resistance of parts of curtain walling and of the perimeter seal. It examines the fire resistance to internal and external fire exposure of:
-   the spandrel panel, i.e. downstand, upstand or a combination thereof, or
-   the perimeter seal, or
-   the fixing of the framing system (anchoring) used to attach the curtain walling to the floor element, or
-   combinations thereof.
Results from tests according to this standard form the basis for classification of curtain walling type A (see 3.3 for definition).
For curtain walling type B (see 3.4 for definition) results may be used to determine fire resistance of parts of a curtain walling to increase the field of application when previously tested to EN 1364 3. For intended classification EW and for corner/faceted specimens EN 1364 3 should be used.
This European Standard does not cover double skin façades, over-cladding systems and ventilated façade systems on external walls. It does not deal with the reaction to fire behaviour of curtain walling.
This standard is intended to be read in conjunction with EN 1363 1 and EN 1363 2 as well as EN 1364 3 for curtain walling type B.
NOTE   Annex A gives informative guidance on the principles of testing parts of curtain walling and the test method.

Feuerwiderstandsprüfungen für nichttragende Bauteile - Teil 4: Vorhangfassaden - Teilausführung

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Feuerwiderstandsdauer von Teilen der Vorhangfassade und der Rand-Dichtung fest. Sie untersucht den Feuerwiderstand der folgenden Elemente bei Brandbeanspruchung von innen und von außen:
-   Brüstungspaneel, d. h. Schürze, aufgeständerte Brüstung oder eine Kombination daraus;
-   Rand-Dichtung;
-   Befestigung des Rahmensystems (Verankerung) zur Anbringung der Vorhangfassade am Decken-element;
-   Kombinationen dieser Elemente.
Die Ergebnisse der Prüfungen nach dieser Norm bilden die Grundlage für die Klassifizierung von Vorhang-fassaden vom Typ A (siehe 3.3 für die Definition).
Für Vorhangfassaden vom Typ B (siehe 3.4 für die Definition) dürfen die Ergebnisse zur Bestimmung des Feuerwiderstands von Teilen der Vorhangfassade angewendet werden, um den Anwendungsbereich zu erweitern, sofern bereits Prüfungen nach EN 1364 3 durchgeführt wurden. Bei vorgesehener Klassifi-zierung EW sowie bei Probekörpern mit Ecken/facettierten Probekörpern sollte EN 1364 3 angewendet werden.
Die vorliegende Europäische Norm deckt keine Doppelfassaden, Fassadenbekleidungssysteme und hinterlüftete Fassadensysteme an Außenwänden ab. Sie behandelt nicht das Brandverhalten von Vorhang-fassaden.
Diese Norm ist dafür vorgesehen, zusammen mit EN 1363 1 und EN 1363 2 sowie - für Vorhangfassaden vom Typ B - mit EN 1364 3 angewendet zu werden.
ANMERKUNG   Anhang A enthält informative Hinweise zu den Grundsätzen der Prüfung von Teilen von Vorhang-fassaden und zum Prüfverfahren.

Essais de résistance au feu des éléments non-porteurs - Partie 4: Murs rideaux - Configuration partielle

La présente Norme européenne spécifie une méthode permettant de déterminer la résistance au feu de
parties de façade rideau et de l'étanchéité périphérique. Elle étudie la résistance au feu à l'exposition interne
et externe :
⎯ du panneau d'allège, c'est-à-dire panneau d’allège suspendu, en appui ou combinaison des deux ;
ou
⎯ de l'étanchéité périphérique ; ou
⎯ des fixations du système d'ossature (ancrage) utilisées pour attacher la façade rideau à l'élément de
plancher, ci-après désignées en tant que « fixation » ; ou
⎯ de combinaisons de ceux-ci.
Les résultats des essais réalisés conformément à la présente norme servent de base au classement d'une
façade rideau de type A (voir définition en 3.2).
Pour une façade rideau de type B (voir définition en 3.3), les résultats peuvent être utilisés pour déterminer la
résistance au feu de parties de la façade rideau afin d'étendre le domaine d'application, lorsqu'elle a été
préalablement soumise à essai conformément à l'EN 1364-3. Lorsqu'un classement EW est prévu et pour les
éléments d'essai à angles/facettes, l'EN 1364-3 doit être utilisée.
La présente Norme européenne ne couvre pas les façades double peau, les systèmes de bardage et les
systèmes de façades ventilées sur des murs extérieurs. Elle ne traite pas du comportement au feu des
façades rideaux.
La présente norme est destinée à être lue conjointement à l'EN 1363-1 et à l'EN 1363-2 ainsi qu'à l'EN 1364-3
pour une façade rideau de type B.
NOTE L'Annexe A informative donne des lignes directrices concernant les principes et la méthode d'essai de parties
de façade rideau.

Preskusi požarne odpornosti nenosilnih elementov - 4. del: Obešene fasade - Delna fasada

General Information

Status
Published
Publication Date
04-Feb-2014
Withdrawal Date
30-Aug-2014
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Completion Date
17-Feb-2020

Relations

Buy Standard

Standard
EN 1364-4:2014
English language
60 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskusi požarne odpornosti nenosilnih elementov - 4. del: Obešene fasade - Delna fasadaFeuerwiderstandsprüfungen für nichttragende Bauteile - Teil 4: Vorhangfassaden - TeilausführungEssais de résistance au feu des éléments non-porteurs - Partie 4: Façades rideaux - Configuration partielleFire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration91.060.10Stene. Predelne stene. FasadeWalls. Partitions. Facades13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 1364-4:2014SIST EN 1364-4:2014en,fr,de01-april-2014SIST EN 1364-4:2014SLOVENSKI
STANDARDSIST EN 1364-4:20071DGRPHãþD



SIST EN 1364-4:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1364-4
February 2014 ICS 13.220.50; 91.060.10 Supersedes EN 1364-4:2007English Version
Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
Essais de résistance au feu des éléments non-porteurs - Partie 4: Façades rideaux - Configuration partielle
Feuerwiderstandsprüfungen für nichttragende Bauteile - Teil 4: Vorhangfassaden - Teilausführung This European Standard was approved by CEN on 9 November 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1364-4:2014 ESIST EN 1364-4:2014



EN 1364-4:2014 (E) 2 Contents Page Foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .7 4 Test equipment .8 4.1 General testing principles .8 4.2 Furnace configuration .9 4.3 Supporting floor .9 5 Test conditions .9 6 Test specimen . 10 6.1 Size . 10 6.2 Number of specimens . 10 6.3 Design . 10 6.3.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.