Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Test method for determination of long-term compression strength of boxes

This document specifies a test method for determining the long-term compression strength for a specified period on boxes made of thermoplastics materials for non-pressure underground conveyance and storage of non-potable water.
The document is applicable for boxes which maintain their linear behaviour over the specified period.

Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Entwässerung für Nicht-Trinkwasser - Prüfverfahren zur Bestimmung der Langzeitdruckfestigkeit von Versickerungsblöcken

Dieses Dokument legt ein Prüfverfahren zur Bestimmung der Langzeitdruckfestigkeit für eine festgelegte Dauer an Versickerungsblöcken aus thermoplastischen Werkstoffen für die drucklose unterirdische Entwässerung und Speicherung von Nicht-Trinkwasser fest.
Das Dokument gilt für Versickerungsblöcke, die ihr lineares Verhalten über die festgelegte Dauer beibehalten.

Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans pression de l’eau non potable - Méthode d’essai pour la détermination de la résistance à la compression à long terme des structures alvéolaires ultra-légères

Le présent document spécifie une méthode d’essai pour déterminer la résistance à la compression à long terme des SAUL fabriquées à partir de matières thermoplastiques pour le transport et le stockage souterrains sans pression de l’eau non potable.
Le présent document s’applique aux SAUL qui conservent leur comportement linéaire pendant la période spécifiée.

Cevni sistemi iz polimernih materialov, ki delujejo po težnostnem principu in so položeni v zemljo, za transport in shranjevanje vode, ki ni namenjena pitju - Preskusna metoda za ugotavljanje dolgotrajne tlačne odpornosti zabojev

Ta dokument določa preskusno metodo za ugotavljanje dolgotrajne tlačne odpornosti konstrukcijskih zabojev iz termoplastičnih materialov za določen čas, ki delujejo po težnostnem principu in so položeni v zemljo, za transport in shranjevanje vode, ki ni namenjena pitju.
Dokument se uporablja tudi za zaboje, ki v določenem obdobju ohranjajo svoje linearne lastnosti.

General Information

Status
Published
Publication Date
20-Aug-2019
Withdrawal Date
27-Feb-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Aug-2019
Due Date
15-Dec-2018
Completion Date
21-Aug-2019

Buy Standard

Standard
EN 17151:2019
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17151:2017
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17151:2019
01-oktober-2019
Cevni sistemi iz polimernih materialov, ki delujejo po težnostnem principu in so
položeni v zemljo, za transport in shranjevanje vode, ki ni namenjena pitju -
Preskusna metoda za ugotavljanje dolgotrajne tlačne odpornosti zabojev
Plastics piping systems for non-pressure underground conveyance and storage of non-
potable water - Test method for determination of long-term compression strength of
boxes
Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Entwässerung für Nicht-
Trinkwasser - Prüfverfahren zur Bestimmung der Langzeitdruckfestigkeit von
Versickerungsblöcken
Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans
pression de l’eau non potable - Méthode d’essai pour la détermination de la résistance à
la compression à long terme des structures alvéolaires ultra-légères
Ta slovenski standard je istoveten z: EN 17151:2019
ICS:
23.040.03 Cevovodi za zunanje sisteme Pipeline and its parts for
transporta vode in njihovi deli external water conveyance
systems
SIST EN 17151:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17151:2019

---------------------- Page: 2 ----------------------
SIST EN 17151:2019


EN 17151
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2019
EUROPÄISCHE NORM
ICS 23.040.01
English Version

Plastics piping systems for non-pressure underground
conveyance and storage of non-potable water - Test
method for determination of long-term compression
strength of boxes
Systèmes de canalisations en plastique pour le Kunststoff-Rohrleitungssysteme für die drucklose
transport et le stockage souterrains sans pression de unterirdische Entwässerung für Nicht-Trinkwasser -
l'eau non potable - Méthode d'essai pour la Prüfverfahren zur Bestimmung der
détermination de la résistance à la compression à long Langzeitdruckfestigkeit von Versickerungsblöcken
terme des structures alvéolaires ultra-légères
This European Standard was approved by CEN on 19 October 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17151:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17151:2019
EN 17151:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and units . 6
5 Test method . 7
6 Apparatus .
...

SLOVENSKI STANDARD
oSIST prEN 17151:2017
01-oktober-2017
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORYNLGHOXMHMRSRWHåQRVWQHPSULQFLSXLQVR
SRORåHQLY]HPOMR]DWUDQVSRUWLQVKUDQMHYDQMHYRGHNLQLQDPHQMHQDSLWMX
3UHVNXVQDPHWRGD]DXJRWDYOMDQMHGROJRWUDMQHWODþQHRGSRUQRVWL]DERMHY
Plastics piping systems for non-pressure underground conveyance and storage of non-
potable water - Test method for determination of long term compression strength of
boxes
Kunststoff-Rohrleitungssysteme für die drucklose unterirdische Entwässerung für Nicht-
Trinkwasser - Prüfverfahren zur Bestimmung der Langzeitdruckfestigkeit von
Versickerungsblöcken
Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans
pression de l’eau non potable - Méthode d’essai pour la détermination de la résistance à
la compression à long terme des structures alvéolaires ultra-légères
Ta slovenski standard je istoveten z: prEN 17151
ICS:
23.040.03 Cevovodi za zunanje sisteme Pipeline and its parts for
transporta vode in njihovi deli external water conveyance
systems
oSIST prEN 17151:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17151:2017

---------------------- Page: 2 ----------------------
oSIST prEN 17151:2017


DRAFT
EUROPEAN STANDARD
prEN 17151
NORME EUROPÉENNE

EUROPÄISCHE NORM

August 2017
ICS 23.040.01
English Version

Plastics piping systems for non-pressure underground
conveyance and storage of non-potable water - Test
method for determination of long term compression
strength of boxes
Systèmes de canalisations en plastique pour le Kunststoff-Rohrleitungssysteme für die drucklose
transport et le stockage souterrains sans pression de unterirdische Entwässerung für Nicht-Trinkwasser -
l'eau non potable - Méthode d'essai pour la Prüfverfahren zur Bestimmung der
détermination de la résistance à la compression à long Langzeitdruckfestigkeit von Versickerungsblöcken
terme des structures alvéolaires ultra-légères
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 155.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17151:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17151:2017
prEN 17151:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.