Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components

This European Standard describes the method to evaluate the performance of protective systems for electrical cable and busbar systems in order to maintain the circuit integrity under fire conditions to classify the protective system according to EN 13501 3 for the P classification. The test examines the behaviour of cable protection systems exposed to fire from outside. The tests specified in this standard are not aimed for assessing the performance of the fire protective system and the penetration seal for maintaining the requirements of the penetrated wall or ceiling (classification E / I).
This method is very different to EN 50200 for the PH classification and also to IEC 60331 11, IEC 60331 21, IEC 60331 23, and IEC 60331 25, which are not designed for fire protective systems for electrical cable systems.
This standard should be used in conjunction with EN 1363 1.
The test results apply to fire protective systems for electrical cable systems rated for voltages up to 1 kV.
The test procedure should also be used to determine the performance of protective systems for use with data and optical cables, however, verification procedures for such cables are still under development. Proposals are given in Annex C.
The protective system may include ventilation devices, inspection hatches, fixed or removable lids etc.
The tests specified in this standard are not aimed for assessing the performance of sprayed or painted coatings (e.g. intumescent or ablative coating, plastic film, epoxy resin) and similar protective layers (e.g. wrap, bandage) applied directly on the cables or bus bars as fire protective system. Also, cables and bus bars with intrinsic resistance to fire, and without fire protective systems around, are excluded (see CENELEC standard EN 50577).
This test method is not applicable for cabinets for electrical accessory containing bus systems, relays or similar.
Dieses Prüfverfahren gilt nicht für Schaltschränke für elektrische Zubehörteile wie Bussysteme, Relais u. ä.

Feuerwiderstandsprüfungen für Installationen - Teil 11: Brandschutzsysteme für Kabelanlagen und zugehörige Komponenten

Diese Europäische Norm legt das Verfahren zur Bewertung der Leistung von Brandschutzsystemen für elektrische Kabelanlagen und Stromschienen hinsichtlich des Erhalts der Stromkreisintegrität (Funktionserhalt) bei einer Brandbeanspruchung mit dem Ziel fest, dem Brandschutzsystem die Klassifizierung P nach EN 13501 3 zu verleihen. Die Prüfung untersucht das Verhalten der Brandschutzsysteme für Kabelanlagen bei einer Brandbeanspruchung von außen. Die in dieser Norm festgelegten Prüfungen zielen nicht darauf ab, die Leistung des Brandschutzsystems und der Abschottung in Hinblick auf die Erfüllung der Anforderungen an die Wand oder Decke mit Durchführung (Klassifizierung E/I) zu beurteilen.
Dieses Prüfverfahren unterscheidet sich grundsätzlich von den in EN 50200 für die Klassifizierung PH sowie in IEC 60331 11, IEC 60331 21, IEC 60331 23 und IEC 60331 25 beschriebenen Verfahren, die nicht für Brandschutzsysteme für elektrische Kabelanlagen ausgelegt sind.
Diese Norm sollte in Verbindung mit EN 1363 1 angewendet werden.
Die Prüfergebnisse gelten für Brandschutzsysteme für elektrische Kabelanlagen mit einer Nenn¬spannung bis 1 kV.
Dieses Prüfverfahren sollte auch angewendet werden, um die Leistung von Brandschutzsystemen zur Anwendung mit Daten- und Lichtwellenleiterkabeln zu ermitteln. Die Beurteilungsverfahren für solche Kabel sind jedoch noch in Erarbeitung. Vorschläge werden in Anhang C aufgeführt.
Das Brandschutzsystem darf Lüftungsvorrichtungen, Revisionskappen, fest installierte oder abnehmbare Verschlussdeckel usw. enthalten.
Die in dieser Norm festgelegten Prüfungen dienen nicht der Beurteilung der Leistungsfähigkeit von durch Aufspritzen oder Aufstreichen aufgebrachten Beschichtungen (z. B. dämmschichtbildende oder wärmeab-sorbierende Beschichtungen, Kunststoffbeschichtungen, Epoxidharze) oder vergleichbaren Schutzschichten (z. B. Umwicklung, Bandage), die direkt auf den Kabeln bzw. Sammelschienen als Brandschutzsystem angewendet werden. Kabel und Sammelschienen mit einem inhärenten Feuerwiderstand sowie ohne umgebende Brandschutzsysteme sind ebenfalls ausgenommen (siehe CENELEC-Norm EN 50577).
Dieses Prüfverfahren gilt nicht für Schaltschränke für elektrische Zubehörteile wie Bussysteme, Relais u. ä.

Essais de résistance au feu des installations de service - Partie 11: Systèmes de protection incendie pour les systèmes de câbles et composants associés

La présente Norme européenne décrit la méthode permettant d’évaluer la performance des systèmes de protection des systèmes de câbles électriques et de bus bars afin que ces derniers maintiennent leur fonctionnalité électrique en cas d’incendie, dans le but de classifier le système de protection conformément à l’EN 13501-3 pour la classification P. L’essai étudie le comportement des systèmes de protection des câbles exposés au feu depuis l’extérieur. Les essais spécifiés dans la présente norme n’ont pas pour objet d’évaluer la performance au feu du système de protection incendie et du calfeutrement en ce qui concerne le respect des exigences concernant la paroi ou le plafond traversé (classification E / I).
Cette méthode est très différente de celles décrites dans l’EN 50200 pour la classification PH et dans l’IEC 60331-11, l’IEC 60331-21, l’IEC 60331-23 et l’IEC 60331-25, celles-ci n’étant pas prévues pour les systèmes de protection incendie des systèmes de câbles électriques.
Il convient d’utiliser la présente norme conjointement avec l’EN 1363-1.
Les résultats d’essai s’appliquent aux systèmes de protection incendie des systèmes de câbles électriques de tensions nominales allant jusqu’à 1 kV.
Il convient également d’utiliser ce mode opératoire d’essai pour déterminer la performance des systèmes de protection utilisés avec des câbles de données et des câbles à fibre optique. Toutefois, les modes opératoires de vérification de ces câbles sont encore en cours de développement. Des propositions sont faites dans l’Annexe C.
Le système de protection peut inclure des dispositifs de ventilation, des trappes de visite, des capots fixes ou amovibles, etc.
Les essais spécifiés dans la présente norme n’ont pas pour objet d’évaluer la performance des revêtements projetés ou peints (par exemple revêtements intumescents ou ablatifs, film plastique, résine époxy) et des couches de protection similaires (par exemple enrubannages, bandages) appliqués directement sur les câbles ou les bus bars en tant que système de protection incendie. En outre, les câbles et les bus bars présentant une résistance au feu intrinsèque et qui ne sont pas entourés de systèmes de protection incendie sont exclus (voir la norme EN 50577 du CENELEC).
La présente méthode d’essai n’est pas applicable aux armoires d’accessoires électriques contenant des systèmes de bus, des relais ou d’autres systèmes similaires.

Preskusi požarne odpornosti servisnih inštalacij - 11. del: Požarni zaščitni sistem za kabelske sisteme in pripadajoče dele

Ta del standarda EN 1366 opisuje metodo ocenjevanja učinkovitosti zaščitnih sistemov pri sistemih električnih kablov za namene vzdrževanja neprekinjenosti tokokroga v požarnih razmerah za razvrščanje zaščitnega sistema v skladu s standardom EN 13501-3 za razvrščanje P. Preskus preučuje vedenje sistemov za zaščito kablov, ki so ognju izpostavljeni z zunanje strani. Preskusi, ki jih določa ta standard, niso namenjeni ocenjevanju učinkovitosti požarnega zaščitnega sistema in tesnjenja prebojev za ohranjanje zahtev za steno ali strop pri širjenju požara (klasifikacija E/I).

General Information

Status
Withdrawn
Publication Date
08-May-2018
Withdrawal Date
21-Dec-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
22-Dec-2021

Relations

Buy Standard

Standard
EN 1366-11:2018 - BARVE
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1366-11:2014
English language
30 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Feuerwiderstandsprüfungen für Installationen - Teil 11: Brandschutzsysteme für Kabelanlagen und zugehörige KomponentenEssais de résistance au feu des installations de service - Partie 11: Systèmes de protection incendie pour les systèmes de câbles et composants associésFire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components91.140.50Sistemi za oskrbo z elektrikoElectricity supply systems29.060.20KabliCables13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 1366-11:2018SIST EN 1366-11:2018en,fr,de01-julij-2018SIST EN 1366-11:2018SLOVENSKI
STANDARD



SIST EN 1366-11:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1366-11
May
t r s z ICS
s uä t t rä w râ
t {ä r x rä t râ
{ sä s v rä w r English Version
Fire resistance tests for service installations æ Part
s sã Fire protective systems for cable systems and associated components Essais de résistance au feu des installations de service æPartie
s sã Systèmes de protection incendie pour les systèmes de câbles et composants associés
Feuerwiderstandsprüfungen für Installationen æ Teil
s sã Brandschutzsysteme für Kabelanlagen und zugehörige Komponenten This European Standard was approved by CEN on
{ April
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
9
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u x xæ s sã t r s z ESIST EN 1366-11:2018



EN 1366-11:2018 (E) 2 Contents Page European foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .7 4 Test equipment .9 4.1 Furnace .9 5 Test conditions .9 5.1 Heating conditions .9 5.2 Pressure conditions.9 6 Test specimen .9 6.1 Dimensions .9 6.2 Number of tests .9 6.3 Design .9 7 Installation of test specimen .
...

SLOVENSKI STANDARD
oSIST prEN 1366-11:2014
01-december-2014
3UHVNXVLSRåDUQHRGSRUQRVWLVHUYLVQLKLQãWDODFLMGHO3RåDUQL]DãþLWQLVLVWHP
]DNDEHOVNHVLVWHPHLQSULSDGDMRþHGHOH
Fire resistance tests for service installations - Part 11: Fire protective systems for cable
systems and associated components
Feuerwiderstandsprüfungen für Installationen - Teil 11: Brandschutzsysteme für
Kabelanlagen
Essais de résistance au feu des installations de service - Partie 11: Systèmes de
protection incendie pour les systèmes de câbles et composants associés
Ta slovenski standard je istoveten z: prEN 1366-11
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
29.060.20 Kabli Cables
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
oSIST prEN 1366-11:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1366-11:2014

---------------------- Page: 2 ----------------------
oSIST prEN 1366-11:2014

EUROPEAN STANDARD
DRAFT
prEN 1366-11
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2014
ICS 13.220.50; 29.060.20; 91.140.50
English Version
Fire resistance tests for service installations - Part 11: Fire
protective systems for cable systems and associated
components
Essais de résistance au feu des installations de service - Feuerwiderstandsprüfungen für Installationen - Teil 11:
Partie 11: Systèmes de protection incendie pour les Brandschutzsysteme für Kabelanlagen
systèmes de câbles et composants associés
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 127.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1366-11:2014 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1366-11:2014
prEN 1366-11:2014 (E)
Contents Page

Foreword . 3
Introduction . 4
1 Scope. 5
2 Normative references . 5
4 Test equipment . 7
4.1 Furnace . 7
5 Test conditions . 7
5.1 Heating conditions . 7
5.2 Pressure conditions .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.