Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)

ISO 17638:2016 specifies techniques for detection of surface imperfections in welds in ferromagnetic materials, including the heat affected zones, by means of magnetic particle testing. The techniques are suitable for most welding processes and joint configurations. Variations in the basic techniques that will provide a higher or lower test sensitivity are described in Annex A.
ISO 17638:2016 does not specify acceptance levels of the indications. Further information on acceptance levels for indications may be found in ISO 23278 or in product or application standards.

Zerstörungsfreie Prüfung von Schweißverbindungen - Magnetpulverprüfung (ISO 17638:2016)

Contrôle non destructif des assemblages soudés - Magnétoscopie (ISO 17638:2016)

ISO 17638:2016 spécifie les techniques pour la détection par magnétoscopie des défauts de surface des soudures de matériaux ferromagnétiques, y compris les zones affectées thermiquement, à l'aide de la technique d'aimantation. Les techniques sont appropriées pour la plupart des procédés de soudage et des configurations d'assemblages. Des variantes des techniques de base donnant une sensibilité plus élevée ou plus faible sont décrites dans l'Annexe A.
ISO 17638:2016 ne spécifie pas des niveaux d'acceptation pour les indications. Des informations complémentaires sur les niveaux d'acceptation peuvent être trouvées dans l'ISO 23278 ou dans les normes d'application ou les normes de produit.

Neporušitveno preskušanje zvarov - Preskušanje z magnetnimi delci (ISO 17638:2016)

Ta dokument določa tehnike za odkrivanje površinskih nepravilnosti zvarov pri feromagnetnih materialih, vključno s področji, izpostavljenimi toploti, s preskušanjem z magnetnimi delci. Tehnike so primerne za večino postopkov varjenja in konfiguracije spojev. Različice osnovnih tehnik, ki vključujejo višjo ali nižjo občutljivost preskušanja, so opisane v dodatku A. Ta dokument ne določa stopenj sprejemljivosti za indikacije. Več informacij o stopnjah sprejemljivosti za indikacije je mogoče najti v standardu ISO 23278, standardih za proizvode ali standardih uporabe.

General Information

Status
Published
Publication Date
15-Nov-2016
Withdrawal Date
30-May-2017
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
16-Nov-2016
Completion Date
16-Nov-2016

Relations

Buy Standard

Standard
EN ISO 17638:2017
English language
22 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 17638:2015
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17638:2017
01-marec-2017
1DGRPHãþD
SIST EN ISO 17638:2010
Neporušitveno preskušanje zvarov - Preskušanje z magnetnimi delci (ISO
17638:2016)
Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2016)
Zerstörungsfreie Prüfung von Schweißverbindungen - Magnetpulverprüfung (ISO
17638:2016)
Contrôle non destructif des assemblages soudés - Contrôle par magnétoscopie (ISO
17638:2016)
Ta slovenski standard je istoveten z: EN ISO 17638:2016
ICS:
25.160.40 Varjeni spoji in vari Welded joints and welds
SIST EN ISO 17638:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17638:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 17638:2017


EN ISO 17638
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2016
EUROPÄISCHE NORM
ICS 25.160.40 Supersedes EN ISO 17638:2009
English Version

Non-destructive testing of welds - Magnetic particle
testing (ISO 17638:2016)
Contrôle non destructif des assemblages soudés - Zerstörungsfreie Prüfung von Schweißverbindungen -
Magnétoscopie (ISO 17638:2016) Magnetpulverprüfung (ISO 17638:2016)
This European Standard was approved by CEN on 2 October 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17638:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17638:2017
EN ISO 17638:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17638:2017
EN ISO 17638:2016 (E)
European foreword
This document (EN ISO 17638:2016) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be
withdrawn at the latest by May 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 17638:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17638:2016 has been approved by CEN as EN ISO 17638:2016 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 17638:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 17638:2017
INTERNATIONAL ISO
STANDARD 17638
Second edition
2016-10-15
Non-destructive testing of welds —
Magnetic particle testing
Contrôle non destructif des assemblages soudés — Magnétoscopie
Reference number
ISO 17638:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------
...

SLOVENSKI STANDARD
oSIST prEN ISO 17638:2015
01-junij-2015
Neporušitvene preiskave zvarnih spojev - Preiskave z magnetnimi delci (ISO/DIS
17638:2015)
Non-destructive testing of welds - Magnetic particle testing (ISO/DIS 17638:2015)
Zerstörungsfreie Prüfung von Schweißverbindungen - Magnetpulverprüfung (ISO/DIS
17638:2015)
Contrôle non destructif des assemblages soudés - Contrôle par magnétoscopie (ISO/DIS
17638:2015)
Ta slovenski standard je istoveten z: prEN ISO 17638 rev
ICS:
25.160.40 Varjeni spoji in vari Welded joints
oSIST prEN ISO 17638:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 17638:2015

---------------------- Page: 2 ----------------------
oSIST prEN ISO 17638:2015
DRAFT INTERNATIONAL STANDARD
ISO/DIS 17638
ISO/TC 44/SC 5 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2015-03-19 2015-06-19
Non-destructive testing of welds — Magnetic particle testing
Contrôle non destructif des assemblages soudés — Contrôle par magnétoscopie
ICS: 25.160.40
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 17638:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 17638:2015
ISO/DIS 17638:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 17638:2015
ISO/DIS 17638:2015(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Safety precautions . 1
5 General . 1
5.1 Information required prior to testing . 1
5.2 Additional pre-test information .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.