CEN/TS 16010:2020
(Main)Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates
This document specifies a system for sampling procedures for testing plastics waste and recyclates which take into account the specifics of the plastics waste and recyclates. It is intended to cover all stages of the plastic recycling process.
The sampling procedures include the statistical specifics of the plastic waste and the behaviour of recyclates.
The sampling method is expected to produce a representative testing sample. Differences can arise due to:
- the mixture of plastics;
- the origin (e.g. green dot in Germany, or electronic/automotive industry);
- the previous use of the plastic material;
- the residual contents (e.g. of containers);
- inert, residual or moisture content on or in the material.
This document is without prejudice to any existing legislation.
Kunststoffe - Kunststoff-Rezyklate - Probenahmeverfahren zur Prüfung von Kunststoffabfall und Rezyklaten
Das vorliegende Dokument legt ein System für Probenahmeverfahren zur Prüfung von Kunststoffabfällen und Rezyklaten fest, die die Besonderheiten von Kunststoffabfällen und Rezyklaten berücksichtigen. Es ist dafür vorgesehen, alle Phasen des Kunststoff-Recyclingprozesses abzudecken.
Die Probenahmeverfahren berücksichtigen die statistischen Besonderheiten der Kunststoffabfälle und das Verhalten von Rezyklaten.
Es wird erwartet, dass das Probenahmeverfahren eine repräsentative Messprobe ergibt. Abweichungen können aufgrund folgender Faktoren entstehen:
- der Mischung von Kunststoffen;
- des Ursprungs (z. B. Grüner Punkt in Deutschland oder Elektronik-/Automobilindustrie);
- der vorherigen Verwendung des Kunststoffmaterials;
- des Restinhalts (z. B. von Behältern);
- des inerten Gehalts, des Rest- oder Feuchtegehalts auf dem oder im Material.
Dieses Dokument berührt keine bestehende Gesetzgebung.
Plastiques - Plastiques recyclés - Procédures d'échantillonnage pour l'essai des déchets de plastiques et des recyclats
No Scope available
Polimerni materiali - Reciklirani polimerni materiali - Postopki vzorčenja za preskušanje polimernih odpadkov in reciklatov
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 16010:2021
01-februar-2021
Nadomešča:
SIST-TS CEN/TS 16010:2014
Polimerni materiali - Reciklirani polimerni materiali - Postopki vzorčenja za
preskušanje polimernih odpadkov in reciklatov
Plastics - Recycled plastics - Sampling procedures for testing plastics waste and
recyclates
Kunststoffe - Kunststoff-Rezyklate - Probenahmeverfahren zur Prüfung von
Kunststoffabfall und Rezyklaten
Plastiques - Plastiques recyclés - Procédures d'échantillonnage pour l'essai des déchets
de plastiques et des recyclats
Ta slovenski standard je istoveten z: CEN/TS 16010:2020
ICS:
13.030.50 Recikliranje Recycling
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST-TS CEN/TS 16010:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16010:2021
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16010:2021
CEN/TS 16010
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
December 2020
TECHNISCHE SPEZIFIKATION
ICS 13.030.50; 83.080.01 Supersedes CEN/TS 16010:2013
English Version
Plastics - Recycled plastics - Sampling procedures for
testing plastics waste and recyclates
Plastiques - Plastiques recyclés - Procédures Kunststoffe - Kunststoff-Rezyklate -
d'échantillonnage pour l'essai des déchets de Probenahmeverfahren zur Prüfung von
plastiques et des recyclats Kunststoffabfall und Rezyklaten
This Technical Specification (CEN/TS) was approved by CEN on 9 November 2020 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16010:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16010:2021
CEN/TS 16010:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 7
5 Calculating the probability that a given set of samples is representative . 7
6 Sampling from non homogeneous material streams . 10
7 Procedures for the determination of material characteristics through sampling. 10
Annex A (normative) Procedures for the determination of material characteristics through
sampling . 13
A.1 General. 13
A.2 Independence of samples .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.