EN ISO 24267:2020
(Main)Footwear - Determination of coefficient of friction for footwear and sole components - Test method (ISO 24267:2020)
Footwear - Determination of coefficient of friction for footwear and sole components - Test method (ISO 24267:2020)
This document provides a method for determining the coefficient of friction between footwear and floorings under conditions simulating those experienced in the phases of a typical walking step when slip is most likely to occur.
The method is applicable to all types of footwear and footwear components, outsole units, heel top pieces (top lifts) and sheet soling materials, excepting PPE footwear (Personal Protective Equipment) and special purpose footwear containing spikes, metal studs or similar.
Schuhe - Bestimmung des Reibungskoeffizienten von Schuhen und Sohlenbestandteilen - Prüfverfahren (ISO 24267:2020)
Dieses Dokument stellt ein Verfahren zur Bestimmung des Koeffizienten der Reibung zwischen Schuhen und Bodenbelägen zur Verfügung unter Nachbildung der Bedingungen, die in den Phasen eines typischen Gehschritts wahrgenommen werden, in denen das Auftreten von Rutschen am wahrscheinlichsten ist.
Das Verfahren ist anwendbar für alle Arten von Schuhen und Schuhbestandteilen, Laufsohleneinheiten, Absatzflecken (Deckflecken) und Werkstoffe für Sohlenplatten, mit Ausnahme von PSA Schuhen (Persönliche Schutzausrüstung) und für Schuhe für besondere Zwecke mit Spikes, Metallbolzen oder gleichwertig.
Chaussures - Détermination du coefficient de frottement pour les chaussures et éléments de semelle - Méthode d'essai (ISO 24267:2020)
Le présent document fournit une méthode pour déterminer le coefficient de frottement entre la chaussure et les revêtements de sol dans des conditions simulant celles des différentes phases typiques d'un pas lorsqu'un risque de glissade est très probable.
La présente méthode s'applique à tous les types de chaussures et composants de chaussure, de semelles d'usure, de bonbouts et de matériaux de feuilles de semelle, à l'exception des chaussures d'équipement de protection individuelle (EPI) et des chaussures destinées à un usage particulier comprenant des pics, crampons ou éléments similaires
Obutev - Določanje koeficienta trenja za obutev in sestavne dele podplata - Preskusne metode (ISO 24267:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 24267:2021
01-januar-2021
Obutev - Določanje koeficienta trenja za obutev in sestavne dele podplata -
Preskusne metode (ISO 24267:2020)
Footwear - Determination of coefficient of friction for footwear and sole components -
Test method (ISO 24267:2020)
Reibung - Prüfverfahren für Schuhe für den täglichen Gebrauch und Schuhbestandteile
(ISO 24267:2020)
Chaussures - Détermination du coefficient de frottement pour les chaussures et
éléments de semelle - Méthode d'essai (ISO 24267:2020)
Ta slovenski standard je istoveten z: EN ISO 24267:2020
ICS:
61.060 Obuvala Footwear
SIST EN ISO 24267:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 24267:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 24267:2021
EN ISO 24267
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2020
EUROPÄISCHE NORM
ICS 61.060
English Version
Footwear - Determination of coefficient of friction for
footwear and sole components - Test method (ISO
24267:2020)
Chaussures - Détermination du coefficient de Schuhe - Bestimmung des Reibungskoeffizienten von
frottement pour les chaussures et éléments de semelle Schuhen und Sohlenbestandteilen - Prüfverfahren (ISO
- Méthode d'essai (ISO 24267:2020) 24267:2020)
This European Standard was approved by CEN on 12 October 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24267:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 24267:2021
EN ISO 24267:2020 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 24267:2021
EN ISO 24267:2020 (E)
European foreword
This document (EN ISO 24267:2020) has been prepared by Technical Committee ISO/TC 216
"Footwear" in collaboration with Technical Committee CEN/TC 309 “Footwear” the secretariat of which
is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2021, and conflicting national standards shall be
withdrawn at the latest by May 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24267:2020 has been approved by CEN as EN ISO 24267:2020 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 24267:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 24267:2021
INTERNATIONAL ISO
STANDARD 24267
First edition
2020-10
Footwear — Determination of
coefficient of friction for footwear and
sole components — Test method
Chaussures — Détermination du coefficient de frottement pour les
chaussures et élé
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.