Weldable structural steels for fixed offshore structures - Technical delivery conditions - Part 4: Cold formed welded hollow sections

This document specifies requirements for submerged arc welded (SAW) and high frequency welded (HFW) cold formed hollow sections to be used in the fabrication of fixed offshore structures.
The thickness limit for SAWL circular hollow sections is up to and including 50,8 mm, for HFW circular hollow sections up to and including 25,4 mm and for HFW square and rectangular hollow sections up to and including 12,5 mm.
Greater thicknesses for SAWL hollow sections can be agreed provided the technical requirements of this European Standard are maintained.
NOTE 1   This document has an Annex E for SAWH round hollow sections with a thickness limit of 30,0 mm, and an Annex F for high strength square and rectangular HFW hollow sections made of steel grades S500 to S700.
This European Standard is applicable to steels for offshore structures designed to operate in the offshore sector but not to steels supplied for the fabrication of subsea pipelines, risers, process equipment, process piping and other utilities. It is primarily applicable to the North Sea Sector, but may also be applicable in other areas provided that due consideration is given to local conditions e.g. design temperature.
NOTE 2   This document has an informative Annex G on the prequalification of steels for fixed offshore structures in arctic areas.
Minimum yield strengths up to 700 MPa are specified together with impact properties at temperatures down to -40 °C.
NOTE 3   A range of material grades is specified in this standard and the user can select the grade most appropriate to the intended use and its service condition.

Schweißgeeignete Baustähle für feststehende Offshore-Konstruktionen - Technische Lieferbedingungen - Teil 4: Kaltgeformte geschweißte Hohlprofile

Dieses Dokument legt die Anforderungen an unterpulvergeschweißte (en: submerged arc welded, SAW) und hochfrequenzgeschweißte (en: high frequency welded, HFW) kaltgeformte Hohlprofile fest, die zur Herstellung von feststehenden Offshore-Konstruktionen verwendet werden.
Die Dickenbeschränkungen betragen für SAWL-Hohlprofile mit rundem Querschnitt 50,8 mm und für HFW-Hohlprofile mit rundem Querschnitt 25,4 mm und für HFW-Hohlprofile mit quadratischem und rechteckigem Querschnitt 12,5 mm.
Größere Dicken können für SAWL-Hohlprofile vereinbart werden, vorausgesetzt die technischen Lieferbedingungen dieser Europäischen Norm werden eingehalten.
ANMERKUNG 1 Dieses Dokument enthält einen Anhang E bezüglich runder spiralnahtgeschweißter (en: submerged arc welded helical, SAWH) Hohlprofile mit einer Dickenbegrenzung von 30,0 mm und einen Anhang F bezüglich hochfester HFW-Hohlprofile mit quadratischem und rechteckigem Querschnitt der Güten S500 bis S700.
Diese Europäische Norm gilt für Stähle für Offshore-Konstruktionen, die für den Offshore-Einsatz vorgesehen sind, jedoch nicht für Stähle zur Herstellung von Unterwasserpipelines, Steigleitungen (en: risers), Verfahrens-Ausrüstungen, Rohrsystemen und anderen Einrichtungen und Ausrüstungen. Sie gilt in erster Linie für den Bereich der Nordsee, kann jedoch auch für andere Gebiete angewendet werden, vorausgesetzt, dass die örtlichen Bedingungen, z. B. die Auslegungstemperatur, genügend berücksichtigt werden.
ANMERKUNG 2 Dieses Dokument hat einen informativen Anhang G bezüglich einer Vorqualifizierung von Stählen für den Einsatz in arktischen Gebieten bei Offshore-Konstruktionen.
Mindestwerte der Streckgrenze bis zu 700 MPa werden zusammen mit Werten für die Kerbschlagarbeit bis herunter zu Temperaturen von -40 °C angegeben.
ANMERKUNG 3 Eine Anzahl von Werkstoffen ist in dieser Norm festgelegt und der Anwender kann den am besten geeigneten Werkstoff aussuchen, der zu der beabsichtigten Verwendung und den Betriebsbedingungen passt.

Aciers de construction soudables destinés à la fabrication de structures marines fixes - Conditions techniques de livraison - Partie 4 : Profils creux soudés formés à froid

Le présent document spécifie les exigences applicables aux profils creux formés à froid soudés à l’arc
immergé (SAW) et soudés par haute fréquence (HFW) destinés à la fabrication de structures marines
fixes.
La limite d’épaisseur pour les profils creux à section circulaire SAWL est inférieure ou égale à 50,8 mm ;
elle est inférieure ou égale à 25,4 mm pour les profils creux à section circulaire HFW et inférieure ou égale
à 12,5 mm pour les profils creux à section carrée et rectangulaire HFW.
Des épaisseurs plus importantes peuvent être convenues par accord pour les profils creux SAWL, à
condition que les exigences techniques de la présente Norme européenne soient respectées.
NOTE 1 Le présent document a une Annexe E qui couvre les profils creux de section circulaire SAWH pour
lesquels est appliquée une limite d’épaisseur de 30,0 mm et une Annexe F qui traite des nuances d’acier S500 à S700
utilisés pour les profils creux HFW à section carrée et rectangulaire à haute limite élastique.
La présente norme européenne s’applique aux aciers pour constructions marines exploitées sur le
domaine maritime européen, à l’exclusion des aciers fournis pour réaliser des oléoducs sous‐marins,
conduites montantes, équipement de process et autres tuyauteries de transport. Elle s’applique
prioritairement au secteur de la mer du Nord mais elle peut également s’appliquer dans d’autres zones
dans la mesure où les conditions locales sont dûment prises en compte, notamment la température.
NOTE 2 Le présent document a une Annexe G informative qui concerne la présélection des aciers destinés à la
construction de structures marines fixes dans les zones arctiques.
La norme spécifie les limites d’élasticité jusqu’à 700 MPa et les énergies de rupture en flexion par choc à
des températures jusqu’à – 40 °C.
NOTE 3 Une gamme de nuances est spécifiée dans cette norme et l'utilisateur peut choisir la nuance la mieux
appropriée à l'utilisation prévue et aux conditions de service.

Konstrukcijska jekla za varjene konstrukcije naftnih ploščadi - Tehnični dobavni pogoji - 4. del: Hladno oblikovani varjeni votli profili

Ta del standarda EN 10225 določa zahteve za obločno pod praškom varjene (SAW) in visokofrekvenčno varjene (HFW) hladno oblikovane votle profile, ki se uporabljajo za izdelavo konstrukcij naftnih ploščadi.
Omejitev glede debeline pri okroglih votlih profilih SAWL je do vključno 50,8 mm, za okrogle votle profile HFW do vključno 25,4 mm in za pravokotne votle profile HFW do vključno 12,5 mm.
Dogovori za večje debeline za votle profile SAWL so mogoči, če se ohranijo tehnične zahteve tega evropskega standarda.
OPOMBA 1: Na voljo je dodatek E o okroglih votlih profilih SAWH z omejitvijo glede debeline 30,0 mm in dodatek F o pravokotnih votlih profilih HFW visoke trdnosti razreda S550 do S700. Za dodatne informacije glejte ta dodatek.
Standard velja za jekla za konstrukcije naftnih ploščadi, projektirane za delovanje v priobalnem območju, vendar ne za jekla, dobavljena za izdelavo podmorskih cevovodov, dvižnih cevi, procesne opreme, procesnih cevovodov in drugih sredstev. Uporablja se predvsem na območju Severnega morja, lahko pa se uporablja tudi na drugih območjih, če se ustrezno upoštevajo lokalni pogoji, npr. temperatura.
OPOMBA 2: Na voljo je dodatek G o predizbiri jekel za konstrukcije naftnih ploščadi v arktičnih območjih.
Minimalne napetosti tečenja do 690 MPa so določene skupaj z nizkotemperaturnimi lastnostmi pri temperaturah do –40 °C.

General Information

Status
Published
Publication Date
14-May-2019
Withdrawal Date
29-Nov-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-May-2019
Due Date
27-Jul-2018
Completion Date
15-May-2019

Relations

Buy Standard

Standard
EN 10225-4:2019
English language
69 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 10225-4:2018
English language
72 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10225-4:2019
01-julij-2019
Nadomešča:
SIST EN 10225:2009
Konstrukcijska jekla za varjene konstrukcije naftnih ploščadi - Tehnični dobavni
pogoji - 4. del: Hladno oblikovani varjeni votli profili
Weldable structural steels for fixed offshore structures - Technical delivery conditions -
Part 4: Cold formed welded hollow sections
Schweißgeeignete Baustähle für feststehende Offshore-Konstruktionen - Technische
Lieferbedingungen - Teil 4: Kaltgeformte geschweißte Hohlprofile
Aciers de construction soudables destinés à la fabrication de structures marines fixes -
Conditions techniques de livraison - Partie 4 : Profils creux soudés formés à froid
Ta slovenski standard je istoveten z: EN 10225-4:2019
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
77.140.10 Jekla za toplotno obdelavo Heat-treatable steels
77.140.70 Jekleni profili Steel profiles
SIST EN 10225-4:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 10225-4:2019

---------------------- Page: 2 ----------------------

SIST EN 10225-4:2019


EN 10225-4
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2019
EUROPÄISCHE NORM
ICS 77.140.10; 77.140.75 Supersedes EN 10225:2009
English Version

Weldable structural steels for fixed offshore structures -
Technical delivery conditions - Part 4: Cold formed welded
hollow sections
Aciers de construction soudables destinés à la Schweißgeeignete Baustähle für feststehende Offshore-
fabrication de structures marines fixes - Conditions Konstruktionen - Technische Lieferbedingungen - Teil
techniques de livraison - Partie 4 : Profils creux soudés 4: Kaltgeformte geschweißte Hohlprofile
formés à froid
This European Standard was approved by CEN on 23 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10225-4:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 10225-4:2019
EN 10225-4:2019 (E)
Contents Page
European foreword . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 Classification and designation . 10
4.1 Classification . 10
4.2 Designation . 10
5 Information to be supplied by the purchaser . 11
5.1 Mandatory information . 11
5.2 Options .
...

SLOVENSKI STANDARD
oSIST prEN 10225-4:2018
01-februar-2018
.RQVWUXNFLMVNDMHNOD]DYDUMHQHNRQVWUXNFLMHQDIWQLKSORãþDGL7HKQLþQLGREDYQL
SRJRMLGHO+ODGQRREOLNRYDQLYDUMHQLYRWOLSURILOL
Weldable structural steels for fixed offshore structures - Technical delivery conditions -
Part 4: Cold formed welded hollow sections
Schweißgeeignete Baustähle für feststehende Offshore-Konstruktionen - Technische
Lieferbedingungen - Teil 4: Kaltgeformte geschweißte Hohlprofile
Aciers de construction soudables destinés à la fabrication de structures marines fixes -
Conditions techniques de livraison - Partie 4 : Profils creux soudés formés à froid
Ta slovenski standard je istoveten z: prEN 10225-4
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
77.140.10 Jekla za toplotno obdelavo Heat-treatable steels
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
oSIST prEN 10225-4:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 10225-4:2018

---------------------- Page: 2 ----------------------
oSIST prEN 10225-4:2018


DRAFT
EUROPEAN STANDARD
prEN 10225-4
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2017
ICS 77.140.10; 77.140.75 Will supersede EN 10225:2009
English Version

Weldable structural steels for fixed offshore structures -
Technical delivery conditions - Part 4: Cold formed welded
hollow sections
Aciers de construction soudables destinés à la Schweißgeeignete Baustähle für feststehende Offshore-
fabrication de structures marines fixes - Conditions Konstruktionen - Technische Lieferbedingungen - Teil
techniques de livraison - Partie 4 : Profils creux soudés 4: Kaltgeformte geschweißte Hohlprofile
formés à froid
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
ECISS/TC 103.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10225-4:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 10225-4:2018
prEN 10225-4:2017 (E)
Contents Page
European foreword . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 8
4 Classification and designation . 10
4.1 Classification . 10
4.2 Designation . 10
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.