EN 16301:2013

Natural stone test methods - Determination of sensitivity to accidental staining

The European Standard specifies a method to assess the sensitivity of natural stones when exposed to accidental staining. It defines a procedure for the application of the stains, the cleaning and the assessment of the surface appearance after cleaning. It also covers the possibility to assess the efficiency of a surface treatment.  Note that the method does not intend to present any de-staining technique.

Prüfverfahren für Naturstein - Bestimmung der Empfindlichkeit gegen unbeabsichtigte Fleckenbildung

Diese Europäische Norm legt ein Verfahren zur Bewertung der Empfindlichkeit von Natursteinen fest, die ungewollter Fleckenbildung ausgesetzt sind. Sie legt ein Verfahren zum Aufbringen der Flecken, zur Reinigung und zur Bewertung der Oberflächenbeschaffenheit nach dem Reinigen fest. Sie behandelt außerdem auch die Möglichkeit einer Bewertung der Wirksamkeit einer Oberflächenbehandlung. Es ist zu beachten, dass mit dem behandelten Verfahren keine Technik zur Fleckentfernung angeboten werden sollte.

Méthodes d'essai pour les pierres naturelles - Détermination de la sensibilité au tachage accidentel

La présente norme européenne spécifie une méthode permettant d’évaluer la sensibilité des pierres naturelles au tachage accidentel. Elle définit un mode opératoire à suivre pour l’application des taches, le nettoyage et l’évaluation de l’aspect de la surface après nettoyage, et permet également d’évaluer l’efficacité d’un traitement de surface. Il est à noter que cette méthode ne préconise en aucun cas une technique particulière de détachage.

Preskusne metode za naravne kamne - Ugotavljanje občutljivosti za naključno obarvanje

Ta evropski standard določa metodo za ocenjevanje občutljivosti naravnih kamnov, ko so izpostavljeni naključnemu obarvanju. Določa postopek nanosa madežev, čiščenja in ocenjevanja videza površine po čiščenju. Vključuje tudi možnost ocenjevanja učinkovitosti površinske obdelave. Namen metode ni predstavitev načinov odstranjevanja madežev.

General Information

• Status: Withdrawn
• Publication Date: 05-Mar-2013
• Withdrawal Date: 23-Mar-2021
• ICS: 73.020 - Mining and quarrying
• ICS: 91.100.15 - Mineral materials and products
• Technical Committee: CEN/TC 246 - Natural stones
• Drafting Committee: CEN/TC 246/WG 2 - Test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 24-Mar-2021
• Ref Project: SIST EN 16301:2013 - Natural stone test methods - Determination of sensitivity to accidental staining

Relations

• Replaced By: EN 16301:2021 - Natural stone test methods - Determination of sensitivity to accidental staining
• Effective Date: 31-Mar-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.REDUYDQMHPrüfverfahren für Naturstein - Bestimmung der Empfindlichkeit gegen unbeabsichtigte FleckenbildungMéthodes d'essai pour les pierres naturelles - Détermination de la sensibilité au tachage accidentelNatural stone test methods - Determination of sensitivity to accidental staining91.100.15Mineralni materiali in izdelkiMineral materials and productsICS:Ta slovenski standard je istoveten z:EN 16301:2013SIST EN 16301:2013en,fr,de01-maj-2013SIST EN 16301:2013SLOVENSKI
STANDARD



SIST EN 16301:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16301
March 2013 ICS 73.020; 91.100.15 English Version
Natural stone test methods - Determination of sensitivity to accidental staining
Méthodes d'essai pour les pierres naturelles - Détermination de la sensibilité au tachage accidentel
Prüfverfahren für Naturstein - Bestimmung der Empfindlichkeit gegen unbeabsichtigte Fleckenbildung This European Standard was approved by CEN on 12 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16301:2013: ESIST EN 16301:2013



EN 16301:2013 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Principle .5 5 Apparatus .5 6 Preparation of specimens .6 6.1 Sampling .6 6.2 Test specimens .7 6.2.1 Surface finish .7 6.2.2 Dimensions .7 6.2.3 Testing environment .7 6.2.4 Pre-conditioning and treatment of the specimens .7 7 Procedure .7 7.1 Documentation of the test specimens .7 7.2 Staining agents to be used in the standard test .8 7.3 Staining procedure .
...