iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1365-1:2012/AC:2013

(Corrigendum)

Fire resistance tests for loadbearing elements - Part 1: Walls

Fire resistance tests for loadbearing elements - Part 1: Walls

CEN/TC 127 - Editorial modification to the dated reference EN 1363-1:1999 throughout the whole document.

Feuerwiderstandsprüfungen für tragende Bauteile - Teil 1: Wände

Essais de résistance au feu des éléments porteurs - Partie 1: Murs

Preskusi požarne odpornosti nosilnih elementov - 1. del: Stene

Ta evropski standard določa preskusno metodo za ugotavljanje požarne odpornosti nosilnih zidov. Uporablja se za notranje in zunanje zidove. Požarno odpornost zunanjih zidov je mogoče določiti pod notranjimi in zunanjimi pogoji izpostavljenosti. Požarna odpornost nosilnih zidov se običajno določi brez perforacij, kot so vrata, steklo ali kanali, odporni proti ognju. Če je mogoče dokazati, da se zaradi oblike odprtine obremenitev ne prenaša na perforacijo, perforacije ni treba preskušati v obremenjenem stanju. Če naj se perforacije vključijo, je treba učinke nanje ugotavljati ločeno. Ta preskusna metoda se ne uporablja za nosilne zidove, ki ne ločujejo prostorov, saj je te mogoče, če so kratki, preskusiti kot stebre v skladu s standardom EN 1365-4. Ta evropski standard se uporablja v povezavi s standardom EN 1363-1:1999.

General Information

Status
Published
Publication Date
23-Apr-2013
ICS
13.220.50 - Fire-resistance of building materials and elements
91.060.10 - Walls. Partitions. Facades
Technical Committee
CEN/TC 127 - Fire safety in buildings
Drafting Committee
CEN/TC 127/WG 1 - Structural and separating elements
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Apr-2013
Completion Date
24-Apr-2013
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/117 - Horizontal complement to the mandates to CEN/CENELEC concerning the execution of standardization work for the valuation of construction products and elements in respect of their resistance to fire
Ref Project
SIST EN 1365-1:2013/AC:2013 - Fire resistance tests for loadbearing elements - Part 1: Walls

Relations

Corrects
EN 1365-1:2012 - Fire resistance tests for loadbearing elements - Part 1: Walls
Effective Date
27-Mar-2013

Buy Standard

EN 1365-1:2013/AC:2013EN 1365-1:2013/AC:2013
PreviousNext
Corrigendum
EN 1365-1:2013/AC:2013
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Preskusi požarne odpornosti nosilnih elementov - 1. del: SteneFeuerwiderstandsprüfungen für tragende Bauteile - Teil 1: WändeEssais de résistance au feu des éléments porteurs - Partie 1: MursFire resistance tests for loadbearing elements - Part 1: Walls91.060.10Stene. Predelne stene. FasadeWalls. Partitions. Facades13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 1365-1:2012/AC:2013SIST EN 1365-1:2013/AC:2013en,fr,de01-september-2013SIST EN 1365-1:2013/AC:2013SLOVENSKI
STANDARD



SIST EN 1365-1:2013/AC:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1365-1:2012/AC
April 2013
Avril 2013
April 2013 ICS 13.220.50; 91.060.10 English version Version Française Deutsche Fassung
Fire resistance tests for loadbearing elements - Part 1: Walls
Essais de résistance au feu des éléments porteurs - Partie 1: Murs
Feuerwiderstandsprüfungen für tragende Bauteile - Teil 1: Wände This corrigendum becomes effective on 24 April 2013 for incorporation in the three official language versions of the EN.
Ce corrigendum prendra effet le 24 avril 2013 pour
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15254-3:2019(Main)
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 3: Lightweight partitions
SIST EN 15254-3:2019

This document provides guidance and, where appropriate, defines procedures for variations of certain parameters and factors associated with the design of lightweight partitions, which have been tested in accordance with EN 1364-1, and classified according to EN 13501-2.
This document only applies to non-loadbearing lightweight partitions with a single steel framework, provided with a lining on both sides of the steel framework. The lightweight partition can be insulated with a mineral wool insulation within the partition cavity or not be insulated.
This document does not apply to any other types of non-loadbearing lightweight partitions considered in EN 1364-1.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15254-4:2018(Main)
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions
SIST EN 15254-4:2019

This document provides guidance and, where appropriate, defines procedures for variations of certain parameters and factors associated with the design of fire resistant glazed elements which have been tested in accordance with EN 1364-1:2015, and classified according to EN 13501-2.
Extended application of fire resistant glazed elements is based on test evidence.
This standard only applies to vertically installed fire resistant glazed elements.
This standard does not apply to door sets and openable windows according to EN 1634-1 and does not apply to curtain walling - full configuration or curtain walling - part configuration according to EN 1364-3 and EN 1364-4.
Glass block assemblies and paver units and channel-shaped glass as defined in EN 1051-1 and EN 572-7 are excluded. There is currently insufficient information available to enable rules for extended application to be developed for these products.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15254-5:2018(Main)
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction
SIST EN 15254-5:2018

This document defines rules for extended applications, provides guidance, and, where appropriate, defines procedures, for variations of certain parameters and factors associated with the design of internal and external non-loadbearing walls constructed of metal sandwich panels and that have been tested in accordance with EN 1364-1, which could generate a classification in accordance with EN 13501-2.
EN 15254-5 applies for self-supporting, double skin metal faced sandwich panels having an insulating core bonded to both facings as defined in EN 14509.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1364-1:2015(Main)
Fire resistance tests for non-loadbearing elements - Part 1: Walls
SIST EN 1364-1:2015

This European standard specifies a method for determining the fire resistance of non-loadbearing walls.
This European Standard is used in conjunction with EN 1363-1.
It is applicable to partitions (non-loadbearing walls) with and without glazing, non-loadbearing walls consisting almost wholly of glazing (glazed non-loadbearing walls) and other non-loadbearing internal and external non-loadbearing walls with and without glazing.
The fire resistance of external non-loadbearing walls can be determined under internal or external exposure conditions. In the latter case the external fire exposure curve given in EN 1363-2 is used.
It is not applicable to:
a) curtain walls (external non-loadbearing walls suspended in front of the floor slab), unless explicitly permitted under EN 1364-3 or EN 1364-4 which shall contain details of the methodology to be used.
b) non-loadbearing walls containing door assemblies which shall be tested to EN 1634-1.
Specific requirements relating to the testing of glazing are given in Annex A.
Specific requirements relating to the testing of non-loadbearing external and internal walls designed to span horizontally between two independently proven fire resisting vertical structural elements are given in annex B.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1364-4:2014(Main)
Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration
SIST EN 1364-4:2014

This European Standard specifies a method for determining the fire resistance of parts of curtain walling and of the perimeter seal. It examines the fire resistance to internal and external fire exposure of:
-   the spandrel panel, i.e. downstand, upstand or a combination thereof, or
-   the perimeter seal, or
-   the fixing of the framing system (anchoring) used to attach the curtain walling to the floor element, or
-   combinations thereof.
Results from tests according to this standard form the basis for classification of curtain walling type A (see 3.3 for definition).
For curtain walling type B (see 3.4 for definition) results may be used to determine fire resistance of parts of a curtain walling to increase the field of application when previously tested to EN 1364 3. For intended classification EW and for corner/faceted specimens EN 1364 3 should be used.
This European Standard does not cover double skin façades, over-cladding systems and ventilated façade systems on external walls. It does not deal with the reaction to fire behaviour of curtain walling.
This standard is intended to be read in conjunction with EN 1363 1 and EN 1363 2 as well as EN 1364 3 for curtain walling type B.
NOTE   Annex A gives informative guidance on the principles of testing parts of curtain walling and the test method.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1364-3:2014(Main)
Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly)
SIST EN 1364-3:2014

This European Standard specifies a method for determining the fire resistance of curtain walling full configuration.
This European Standard is used in conjunction with EN 1363 1.
NOTE   Annex B gives further information on the test method.
The test method is applicable to curtain walling type B (for definition see 3.4). The test is not appropriate for testing curtain walling type A (for definition see 3.3).
The fire resistance of curtain walling may be determined under internal or external exposure conditions. In the latter case the external fire exposure curve given in EN 1363 2 may be used, subject to deviating national regulations.
Tests on individual parts of a curtain walling (e.g. perimeter seal, infill panel or fixing of the framing system (anchoring) used to attach the curtain walling to the floor element) or systems with fire resistance requirements only to the spandrel area may be performed using EN 1364 4. For vertical linear gap seals, this part of the standard applies.
This European Standard does not cover double skin façades, over-cladding systems and ventilated façade systems on external walls. It does not deal with the reaction to fire behaviour of curtain walling.
This standard is intended to be read in conjunction with EN 1363 1 and EN 1363 2.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15254-6:2014(Main)
Extended application of results from fire resistance tests - Non-loadbearing walls - Part 6: Curtain walling
SIST EN 15254-6:2014

This European Standard provides guidance and, where appropriate, defines procedures for variations of certain parameters and factors associated with the design of curtain walling according to EN 13830 which have been tested in accordance with EN 1364 3 and classified according to EN 13501 2 (curtain walling type B according to 3.2), components of curtain walling type A or type B according to 3.1 and 3.2, e.g. spandrel panels, which have been tested in accordance with EN 1364 4, and classified according to EN 13501 2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1365-1:2012(Main)
Fire resistance tests for loadbearing elements - Part 1: Walls
SIST EN 1365-1:2013

This European Standard specifies a method of testing the fire resistance of loadbearing walls. It is applicable to both internal and external walls. The fire resistance of external walls can be determined under internal or external exposure conditions.
The fire resistance performance of loadbearing walls is normally evaluated without perforations such as doors, glazing or fire resistant ducts. If it can be demonstrated that the design of the opening is such that load is not transmitted to the perforation, then the perforation need not be tested in the loaded condition. If perforations are to be included, the effects of these will need to be separately established.
This test method is not applicable to non-separating loadbearing walls which, in short widths, can be tested as columns to EN 1365-4.
This European Standard is used in conjunction with EN 1363-1:1999.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15080-12:2011(Main)
Extended application of results from fire resistance tests - Part 12: Loadbearing masonry walls
SIST EN 15080-12:2011

This European Standard provides guidance, and where appropriate defines procedures, for variations of certain parameters and factors associated with the design of internal and external loadbearing walls that have been tested in accordance with EN 1365-1.
Data from historic standard fire resistance tests may be used as supporting information.
Manufactured stone masonry units according to EN 771-5 and natural stone units according to EN 771-6 are not covered.
This European Standard is not valid for reinforced masonry.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 15080-12(Main)
Extended application of results from fire resistance tests - Part 12: Penetration seals
oSIST prEN 15080-12:2022

The purpose of this document is to provide the principles and guidance for the preparation of extended application documents for penetration sealing systems tested in accordance with prEN 1366-3. The field of the extended application document is additional to the direct field of application given within prEN 1366-3 and may be applied to or based on a single test, or a number of tests, which provide the relevant information for the formulation of an extended application.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day