EN 13400:2001
(Main)Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
This European Standard specifies the sampling location, preparation and duration of conditioning of samples and test pieces for footwear components and footwear, to carry out the test methods needed to determine the suitable properties for the end use.
These are the general conditions unless otherwise stated in the corresponding test method.
Schuhe - Lage der Stellen für die Probenahme an Bestandteilen von Schuhwerk
Dieser europäische Norm-Entwurf legt die Lage der Stellen für die Probenahme an Bestandteilen von Schuhwerk fest, um damit die Prüfungen durchzuführen, die zur Bestimmung der entsprechenden Eigenschaften für den Endgebrauch notwendig sind.
Chaussure - Localisation de l'échantillonnage, préparation et durée de conditionnement des échantillons et éprouvettes
La présente Norme européenne spécifie les emplacements d'échantillonnage des éléments constitutifs de chaussure, afin de procéder aux méthodes d'essai nécessaires à la détermination des propriétés adéquates pour l'utilisation finale. Celles-ci sont des conditions générales non applicables si la méthode d'essai préconise en d'autres.
Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Footwear - Sampling location, preparation and duration of conditioning of samples and test piecesSchuhe - Lage der Stellen für die Probenahme an Bestandteilen von SchuhwerkChaussure - Localisation de l'échantillonnage, préparation et durée de conditionnement des échantillons et éprouvettesFootwear - Sampling location, preparation and duration of conditioning of samples and test pieces61.060ObuvalaFootwearICS:Ta slovenski standard je istoveten z:EN 13400:2001SIST EN 13400:2004en01-januar-2004SIST EN 13400:2004SLOVENSKI
STANDARD
SIST EN 13400:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13400November 2001ICS 61.060English versionFootwear - Sampling location, preparation and duration ofconditioning of samples and test piecesChaussure - Localisation de l'échantillonnage, préparationet durée de conditionnement des échantillons etéprouvettesSchuhe - Lage der Stellen für die Probenahme anBestandteilen von SchuhwerkThis European Standard was approved by CEN on 29 September 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13400:2001 ESIST EN 13400:2004
EN 13400:2001 (E)2ContentspageForeword.3Introduction.41Scope.52Normative references.53Terms and definitions.64Definition of the reference system.64.1Location of X axis (See Figure 1).64.2Location of Y axis (See Figure 2).75Sampling location.75.1Sampling of uppers, outsoles, insoles, insocks and linings.75.2Sampling of shanks, toe puff and stiffeners.7Bibliography.14SIST EN 13400:2004
EN 13400:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 309 "Footwear", the secretariat ofwhich is held by AENOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2002, and conflicting national standards shall be withdrawn at the latest byMay 2002.This standard contains a Bibliography.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United King
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.