iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 12311:2013

(Main)

Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15)

Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15)

ISO 12311:2012 specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.
Other test methods may be used if shown to be equivalent.

Persönliche Schutzausrüstung - Prüfverfahren für Sonnenbrillen und ähnlichen Augenschutz (ISO 12311:2013)

Diese Internationale Norm beschreibt die Prüfmethoden, um die nötigen Messungen durchzuführen, die nach ISO 12312-1 Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use nötig sind.
Diese Prüfmethoden sind Referenzmethoden. Andere Prüfverfahren dürfen verwendet werden, falls deren Gleichwertigkeit nachgewiesen wurde.

Équipement de protection individuelle - Méthodes d'essai pour lunettes de soleil et articles de lunetterie associés (ISO 12311:2013, Version corrigée 2014-08-15)

L'ISO 12311:2013 spécifie les méthodes d'essai de référence permettant de déterminer les propriétés des lunettes de soleil indiquées dans l'ISO 12312 (toutes les parties). Elle s'applique à toutes les lunettes de soleil et aux articles de lunetterie associés.
D'autres méthodes d'essai peuvent être utilisées s'il est démontré qu'elles sont équivalentes.

Osebna varovalna oprema - Preskusne metode za sončna očala in podobno opremo (ISO 12311:2013, popravljena verzija 2014-08-15)

Ta mednarodni standard določa referenčne preskusne metode za ugotavljanje lastnosti sončnih očal iz standarda ISO 12312 (vsi deli). Uporablja se za vsa sončna očala in podobna očala. Uporabljajo se lahko druge preskusne metode, če so dokazano enakovredne.

General Information

Status
Withdrawn
Publication Date
06-Aug-2013
Withdrawal Date
12-Dec-2023
ICS
11.040.70 - Ophthalmic equipment
13.340.20 - Head protective equipment
Technical Committee
CEN/TC 85 - Eye-protective equipment
Drafting Committee
CEN/TC 85 - Eye-protective equipment
Current Stage
Directive
2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
SIST EN ISO 12311:2013 - Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2013, Corrected version 2014-08-15)

Relations

Replaced By
EN ISO 12311:2023 - Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2023)
Effective Date
18-Jan-2023

Buy Standard

EN ISO 12311:2013EN ISO 12311:2013
PreviousNext
Standard
EN ISO 12311:2013
English language
94 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
EN ISO 12311:2013EN ISO 12311:2013
PreviousNext
Standard
EN ISO 12311:2013
English language
94 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12311:2013
01-oktober-2013
Osebna varovalna oprema - Preskusne metode za sončna očala in podobno
opremo (ISO 12311:2013, popravljena verzija 2014-08-15)
Personal protective equipment - Test methods for sunglasses and related eyewear (ISO
12311:2013, Corrected version 2014-08-15)
Persönliche Schutzausrüstung - Prüfverfahren für Sonnenbrillen und ähnlichen
Augenschutz (ISO 12311:2013)
Équipement de protection individuelle - Méthodes d'essai pour lunettes de soleil et
articles de lunetterie associés (ISO 12311:2013, Version corrigée 2014-08-15)
Ta slovenski standard je istoveten z: EN ISO 12311:2013
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST EN ISO 12311:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 12311:2013

---------------------- Page: 2 ----------------------
SIST EN ISO 12311:2013

EUROPEAN STANDARD
EN ISO 12311

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2013
ICS 13.340.20
English Version
Personal protective equipment - Test methods for sunglasses
and related eyewear (ISO 12311:2013, Corrected version 2014-
08-15)
Équipement de protection individuelle - Méthodes d'essai Persönliche Schutzausrüstung - Prüfverfahren für
pour lunettes de soleil et articles de lunetterie associés (ISO Sonnenbrillen und ähnlichen Augenschutz (ISO
12311:2013, Version corrigée 2014-08-15) 12311:2013, korrigierte Fassung 2014-08-15)
This European Standard was approved by CEN on 30 June 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12311:2013 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 12311:2013
EN ISO 12311:2013 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC .4

2

---------------------- Page: 4 ----------------------
SIST EN ISO 12311:2013
EN ISO 12311:2013 (E)
Foreword
This document (EN ISO 12311:2013) has been prepared by Technical Committee ISO/TC 94 “Personal safety
- Protective clothing and equipment” in collaboration with Technical Committee CEN/TC 85 “Eye protective
equipment” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn
at the latest by February 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Forme
...

SLOVENSKI STANDARD
SIST EN ISO 12311:2013
01-oktober-2013
2VHEQDYDURYDOQDRSUHPD3UHVNXVQHPHWRGH]DVRQþQDRþDODLQSRGREQR
RSUHPR ,62
Personal protective equipment - Test methods for sunglasses and related eyewear (ISO
12311:2013)
Persönliche Schutzausrüstung - Prüfverfahren für Sonnenbrillen und ähnlichen
Augenschutz (ISO 12311:2013)
Équipement de protection individuelle - Méthodes d'essai pour lunettes de soleil et
articles de lunetterie associés (ISO 12311:2013)
Ta slovenski standard je istoveten z: EN ISO 12311:2013
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST EN ISO 12311:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12311:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 12311:2013


EUROPEAN STANDARD
EN ISO 12311

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2013
ICS 13.340.20
English Version
Personal protective equipment - Test methods for sunglasses
and related eyewear (ISO 12311:2013)
Équipement de protection individuelle - Méthodes d'essai Persönliche Schutzausrüstung - Prüfverfahren für
pour lunettes de soleil et articles de lunetterie associés Sonnenbrillen und ähnlichen Augenschutz (ISO
(ISO 12311:2013) 12311:2013)
This European Standard was approved by CEN on 30 June 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12311:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12311:2013
EN ISO 12311:2013 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 89/686/EEC .4

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12311:2013
EN ISO 12311:2013 (E)
Foreword
This document (EN ISO 12311:2013) has been prepared by Technical Committee ISO/TC 94 “Personal safety
- Protective clothing and equipment” in collaboration with Technical Committee CEN/TC 85 “Eye protective
equipment” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2014, and conflicting national standards shall be withdrawn
at the latest by February 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive.
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Ro
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 12312-2:2015(Main)
Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)
SIST EN ISO 12312-2:2015

ISO 12312-2:2015 applies to all afocal (plano power) products intended for direct observation of the sun, such as solar eclipse viewing.
ISO 12312-2:2015 does not apply to the following:
a)    afocal (plano power) sunglasses and clip-ons for general use intended for protection against solar radiation;
b)    eyewear for protection against radiation from artificial light sources, such as those used in solaria;
c)    eye protectors specifically intended for sports (e.g. ski goggles or other types);
d)    sunglasses that have been medically prescribed for attenuating solar radiation;
e)    prescription sunglass lenses.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12312-2:2015(Main)
Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)
SIST EN ISO 12312-2:2015

ISO 12312-2:2015 applies to all afocal (plano power) products intended for direct observation of the sun, such as solar eclipse viewing.
ISO 12312-2:2015 does not apply to the following:
a)    afocal (plano power) sunglasses and clip-ons for general use intended for protection against solar radiation;
b)    eyewear for protection against radiation from artificial light sources, such as those used in solaria;
c)    eye protectors specifically intended for sports (e.g. ski goggles or other types);
d)    sunglasses that have been medically prescribed for attenuating solar radiation;
e)    prescription sunglass lenses.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 81060-2:2019/A2:2024(Amendment)
Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type - Amendment 2 (ISO 81060-2:2018/Amd 2:2024)
SIST EN ISO 81060-2:2020/A2:2024
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16783:2024(Main)
Thermal insulation products - Environmental Product Declarations (EPD) - Product Category Rules (PCR) complementary to EN 15804 for factory made and in-situ formed products
kSIST FprEN 16783:2024

This document provides the product category rules (PCR) for Type III environmental declarations (as in EN 15804:2012+A2:20191) for factory made and in situ thermal insulation products.
Complementary to EN 15804:2012+A2:20191, the PCR described in this document:
-   specify the declared unit to be used;
-   define the system boundaries for thermal insulation products;
-   specify/describe the default scenarios and rules for defining scenarios for certain life cycle information modules.
These PCR are intended to be used for cradle to gate, cradle to gate with options or cradle to grave assessment, provided the intention is properly stated in the system boundary description.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16021:2024(Main)
Absorbent incontinence products for urine and/or faeces - Basic principles for evaluation of single-use adult products from the perspective of users and caregivers (ISO 16021:2024)
SIST EN ISO 16021:2024

This document provides guidelines and requirements for designing and conducting an evaluation of single-use adult incontinence absorbing products. It provides guidelines and requirements on creating data collection tools. In particular, it provides a framework for eliciting and recording the views of users and their carers on the acceptability of products. In addition, a product diary is described which can help to quantify some parameters of product use, such as wear times, the mass of urine absorbed by the product and the severity of any leakage from it.
This document does not cover direct comparison between products based on statistical parameters, neither does it provide guidelines on measuring the clinical efficacy of products; that is available in ISO 14155.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2620:2024(Main)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)
kSIST FprEN ISO 2620:2024

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day