prEN 14361
(Main)Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
This document specifies criteria for sampling and gives guidance on the sampling from melts in order to verify if the chemical composition of the product fabricated from a metal melt is in conformance with the specification.
NOTE For sampling from product or laboratory samples see EN 14242 or EN 14726.
Aluminium und Aluminiumlegierungen - Chemische Analyse - Probenahme von Metallschmelzen
Dieses Dokument legt die Probenahmekriterien fest und gibt eine Anleitung für die Probenahme von Metallschmelzen, um zu prüfen, ob die chemische Zusammensetzung des aus einer Metallschmelze hergestellten Erzeugnisses mit der Spezifikation übereinstimmt.
ANMERKUNG Für die Probenahme von Erzeugnissen oder Laborproben siehe EN 14242 oder EN 14726.
Aluminium et alliages d'aluminium - Analyse chimique - Echantillonnage du métal fondu
Le présent document spécifie les critères d’échantillonnage et fournit des lignes directrices sur l’échantillonnage des métaux fondus en vue de vérifier si la composition chimique du produit fabriqué à partir d’un métal fondu est conforme à la spécification.
NOTE Pour l’échantillonnage des produits ou des échantillons pour laboratoire, voir l’EN 14242 ou l’EN 14726.
Aluminij in aluminijeve zlitine – Kemična analiza – Vzorčenje iz topljene kovine
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14361:2024
01-junij-2024
Aluminij in aluminijeve zlitine – Kemična analiza – Vzorčenje iz topljene kovine
Aluminium and aluminium alloys - Chemical analysis - Sampling from metal melts
Aluminium und Aluminiumlegierungen - Chemische Analyse - Probenahme von
Metallschmelzen
Aluminium et alliages d'aluminium - Analyse chimique - Echantillonnage du métal fondu
Ta slovenski standard je istoveten z: prEN 14361
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.120.10 Aluminij in aluminijeve zlitine Aluminium and aluminium
alloys
oSIST prEN 14361:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14361:2024
---------------------- Page: 2 ----------------------
oSIST prEN 14361:2024
DRAFT
EUROPEAN STANDARD
prEN 14361
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2024
ICS 77.120.10; 77.040.30 Will supersede EN 14361:2004
English Version
Aluminium and aluminium alloys - Chemical analysis -
Sampling from metal melts
Aluminium et alliages d'aluminium - Analyse chimique Aluminium und Aluminiumlegierungen - Chemische
- Echantillonnage du métal fondu Analyse - Probenahme von Metallschmelzen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 132.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14361:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14361:2024
prEN 14361:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Sampling from a melt . 5
4.1 General. 5
4.2 Sampling procedure . 5
4.3 Size and coating of the sampling ladle for sampling from liquid metal . 5
4.4 Form and size of the sampling mould and of the sample taken from liquid metal . 6
4.5 Sampling plan . 6
4.6 Preparation of tools for sampling from metal melts . 6
4.7 Requirements for a sound
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.