iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 19119:2016

(Main)

Geographic information - Services (ISO 19119:2016)

Geographic information - Services (ISO 19119:2016)

ISO 19119:2016 defines requirements for how platform neutral and platform specific specification of services shall be created, in order to allow for one service to be specified independently of one or more underlying distributed computing platforms.
ISO 19119:2016 defines requirements for a further mapping from platform neutral to platform specific service specifications, in order to enable conformant and interoperable service implementations.
ISO 19119:2016 addresses the Meta:Service foundation of the ISO geographic information reference model described in ISO 19101‑1:2014, Clause 6 and Clause 8, respectively.
ISO 19119:2016 defines how geographic services shall be categorised according to a service taxonomy based on architectural areas and allows also for services to be categorised according to a usage life cycle perspective, as well as according to domain specific and user defined service taxonomies, providing support for easier publication and discovery of services.

Geoinformation - Dienste (ISO 19119:2016)

Information géographique - Services (ISO 19119:2016)

ISO 19119:2016 définit des exigences sur la façon dont une spécification de services propre à une plate-forme et applicable à toutes les plates-formes doit être créée, de manière à ce qu'un service puisse être spécifié indépendamment d'une ou de plusieurs plates-formes informatiques distribuées sous-jacentes.
ISO 19119:2016 définit des exigences pour une mise en correspondance supplémentaire des spécifications de services applicables à toutes les plates-formes avec les spécifications de services propres à une plate-forme, de manière à assurer des implémentations de services conformes et interopérables.
ISO 19119:2016 traite du fondement Méta:Service du modèle de référence d'information géographique ISO décrit dans l'ISO 19101‑1:2014, Articles 6 et 8.
ISO 19119:2016 définit la façon dont des services géographiques doivent être classés selon une taxonomie de services basée sur des domaines architecturaux, et permet également de classer les services selon une perspective de cycle de vie à l'usage ainsi que selon des taxonomies de services propres à un domaine et définies par l'utilisateur, ce qui fournit un support facilitant la publication et la découverte de services.

Geografske informacije - Storitve (ISO 19119:2016)

Ta mednarodni standard določa zahteve za ustvarjanje platformsko nevtralnih in platformsko specifičnih specifikacij storitev, tako da je omogočena določitev posamezne storitve neodvisno
od ene ali več osnovnih razdeljenih računalniških platform.
Ta mednarodni standard določa zahteve za nadaljnje preslikave iz platformsko nevtralnih v platformsko specifične specifikacije storitev, tako da omogoča skladne in interoperabilne implementacije storitev.
Ta mednarodni standard obravnava osnovo Meta:Service referenčnega modela geografskih informacij ISO, opisanega v standardu ISO 19101-1:2014, točki 6 in 8.
Ta mednarodni standard določa, kako morajo biti kategorizirane geografske storitve glede na taksonomijo storitev na podlagi arhitekturnih področij, in omogoča, da so storitve kategorizirane glede na uporabo z vidika življenjskega cikla ter glede na domensko in uporabniško določene taksonomije storitev z zagotavljanjem podpore za lažje objavljanje in odkrivanje storitev.

General Information

Status
Published
Publication Date
23-Feb-2016
Withdrawal Date
30-Aug-2016
ICS
35.240.70 - IT applications in science
Technical Committee
CEN/TC 287 - Geographic Information
Drafting Committee
CEN/TC 287 - Geographic Information
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Feb-2016
Completion Date
24-Feb-2016
Ref Project
SIST EN ISO 19119:2016 - Geographic information - Services (ISO 19119:2016)

Relations

Replaces
EN ISO 19119:2006 - Geographic information - Services (ISO 19119:2005)
Effective Date
02-Mar-2016
Replaces
EN ISO 19119:2006/A1:2011 - Geographic information - Services - Amendment 1: Extensions of the service metadata model (ISO 19119:2005/AMD 1:2008)
Effective Date
22-Aug-2012

Buy Standard

EN ISO 19119:2016EN ISO 19119:2016
PreviousNext
Standard
EN ISO 19119:2016
English language
113 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19119:2016
01-december-2016
1DGRPHãþD
SIST EN ISO 19119:2006
SIST EN ISO 19119:2006/A1:2011
Geografske informacije - Storitve (ISO 19119:2016)
Geographic information - Services (ISO 19119:2016)
Geoinformation - Dienste (ISO 19119:2016)
Information géographique - Services (ISO 19119:2016)
Ta slovenski standard je istoveten z: EN ISO 19119:2016
ICS:
03.080.01 Storitve na splošno Services in general
07.040 Astronomija. Geodezija. Astronomy. Geodesy.
Geografija Geography
35.240.70 Uporabniške rešitve IT v IT applications in science
znanosti
SIST EN ISO 19119:2016 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19119:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 19119:2016


EN ISO 19119
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2016
EUROPÄISCHE NORM
ICS 35.240.70 Supersedes EN ISO 19119:2006
English Version

Geographic information - Services (ISO 19119:2016)
Information géographique - Services (ISO 19119:2016) Geoinformation - Dienste (ISO 19119:2016)
This European Standard was approved by CEN on 20 February 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19119:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19119:2016
EN ISO 19119:2016 (E)
Contents
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 19119:2016
EN ISO 19119:2016 (E)
European foreword
This document (EN ISO 19119:2016) has been prepared by Technical Committee ISO/TC 211
“Geographic information/Geomatics” in collaboration with Technical Committee CEN/TC 287
“Geographic Information” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2016, and conflicting national standards shall
be withdrawn at the latest by August 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 19119:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19119:2016 has been approved by CEN as EN ISO 19119:2016 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 19119:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 19119:2016
INTERNATIONAL ISO
STANDARD 19119
Second edition
2016-01-15
Geographic information — Services
Information géographique — Services
Reference number
ISO 19119:2016(E)
©
ISO 2016

---------------------- Page: 7 ----------------------

SIST EN ISO 19119:2016
ISO 19119:2016(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rig
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 19152-1:2024(Main)
Geographic information - Land Administration Domain Model (LADM) - Part 1: Generic conceptual model (ISO 19152-1:2024)
SIST EN ISO 19152-1:2024

This document:
—     defines a reference Land Administration Domain Model (LADM) covering basic information-related components of land administration/georegulation;
—     provides an abstract, conceptual model with packages related to:
—     parties (people and organizations),
—     basic administrative units, rights, responsibilities and restrictions (RRRs),
—     spatial units,
—     a generic conceptual model (sources and versioned object);
—     provides terminology for land administration/georegulation, based on various national and international systems, that is as simple as possible in order to be useful in practice. The terminology allows a shared description of different formal or informal practices and procedures in various jurisdictions;
—     provides a content model independent of encoding, allowing for the support of various encodings;
—     provides a basis for national and regional profiles;
—     enables the combining of land administration/georegulation information from different sources in a coherent manner.
The following are outside the scope of this document:
—     interference with (national) land administration/georegulation laws with potentially legal implications due to the possibility of describing different types of systems but in the same notation;
—     construction of external databases with party data, address data, land cover data, physical utility network data, archive data and taxation data. However, the LADM provides stereotype classes for these data sets to indicate which data set elements the LADM expects from these external sources, if available.
This document provides the concepts and basic structure for standardization in the land administration/georegulation domain. It defines a general schema that permits regulatory information to be described. It also allows for the relationship to multiple parties and groups to be expressed together with a referencing structure so that sourcing of all information systems can be maintained. This document establishes the common elements and basic schema upon which more detailed schema can be established.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19144-2:2023(Main)
Geographic information - Classification systems - Part 2: Land Cover Meta Language (LCML) (ISO 19144-2:2023)
SIST EN ISO 19144-2:2024

This document specifies a Land Cover Meta Language (LCML) expressed as a UML metamodel that allows different Land Cover classification systems to be described based on physiognomic aspects. This document recognizes that a number of Land Cover classification systems exist. It provides a common reference structure for the comparison and integration of data for any generic Land Cover classification system, but does not intend to replace those classification systems.

  • Draft
    145 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19160-2:2023(Main)
Addressing - Part 2: Assigning and maintaining addresses for objects in the physical world (ISO 19160-2:2023)
SIST EN ISO 19160-2:2024

This document focuses on assigning and maintaining addresses that allow the unambiguous determination of an object in the physical world for purposes of identification and location in the context of public administration and public service delivery. During assignment, an address is first associated with a particular object in the physical world. During maintenance, the address changes, for example, it is re-assigned to a different object, one or more of the address components are modified (e.g. a street name change), or the address is retired when it is no longer used. This document:
a)       specifies a good practice for assigning and maintaining addresses and address data; and
b)       specifies a governance framework for assigning and maintaining addresses and address data.
Very often local governments (e.g. municipalities) are assigned the mandate for the planning, implementation, evaluation and ongoing maintenance of addresses, and they are often supported by other organizations, such as the national government, a postal agency, private sector companies and national or regional organizations. This document is applicable to all organizations who have an interest, role or responsibility in address assignment and maintenance, for example in terms of:
—     developing legislation, policies or regulations for addressing;
—     facilitating and coordinating the naming of address components (the constituent parts of an address) and announcing and communicating these names;
—     installing address component signs in the physical world;
—     designing and implementing business processes related to address assignment and maintenance;
—     designing, implementing and maintaining access to address data;
—     developing software to facilitate the above; and
—     using addresses.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19115-3:2023(Main)
Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts (ISO 19115-3:2023)
SIST EN ISO 19115-3:2024

This document defines an integrated XML implementation of ISO 19115-1 and ISO 19115-2 by defining the following artefacts:
—     a set of XML schema required to validate metadata instance documents conforming to conceptual model elements defined in ISO 19115-1 and ISO 19115-2; and
—     a set of ISO/IEC 19757-3 (Schematron) rules that implement validation constraints in the ISO 19115-1 and ISO 19115-2 UML models that are not validated by the XML schema.
This document describes the procedure used to generate XML schemas from ISO geographic information conceptual models related to metadata. The XML schemas are generated directly from the conceptual UML model (8.5).

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/A2:2024
  • Amendment
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19150-6:2023(Main)
Geographic information - Ontology - Part 6: Service ontology register (ISO 19150-6:2023)
SIST EN ISO 19150-6:2023

This document establishes a standard registration and maintenance mechanism for the registration of ISO 19150-4-conformant geographic information service ontologies.
This document makes use of ISO 19135-1 whenever appropriate.
This document does not define semantics operators or rules for ontologies, and does not develop any application ontology.
In relation to ISO 19101-1:2014, 6.2, this document defines and formalizes the following purposes of the ISO geographic information reference model:
—     geographic information service components and their behaviour for data processing purposes over the Web; and
—     OWL ontologies to cast ISO/TC 211 International Standards to benefit from and support the Semantic Web.
In relation to ISO 19101-1:2014, 8.3, this document addresses the Application:Procedural foundation of the ISO geographic information reference model.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19123-3:2023(Main)
Geographic information - Schema for coverage geometry and functions - Part 3: Processing fundamentals (ISO 19123-3:2023, Corrected version 2023-11)
SIST EN ISO 19123-3:2023

This document defines a coverage processing language for server-side extraction, filtering, processing, analytics, and fusion of multi-dimensional geospatial coverages representing, for example, spatio-temporal sensor, image, simulation, or statistics datacubes. Services implementing this language provide access to original or derived sets of coverage information, in forms that are useful for client-side consumption.
This document relies on the ISO 19123-1 abstract coverage model. In this edition, regular and irregular multi-dimensional grids are supported for axes that can carry spatial, temporal or any other semantics. Future editions will additionally support further axis types as well as further coverage types from ISO 19123-1, specifically, point clouds and meshes.

  • Standard
    86 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19123-1:2023(Main)
Geographic information - Schema for coverage geometry and functions - Part 1: Fundamentals (ISO 19123-1:2023)
SIST EN ISO 19123-1:2023

This document defines a conceptual schema for coverages. A coverage is a mapping from a spatial, temporal or spatiotemporal domain to attribute values sharing the same attribute type. A coverage domain consists of a collection of direct positions in a coordinate space that can be defined in terms of spatial and/or temporal dimensions, as well as non-spatiotemporal (in ISO 19111:2019, “parametric”) dimensions. Examples of coverages include point clouds, grids, meshes, triangulated irregular networks, and polygon sets. Coverages are the prevailing data structures in a number of application areas, such as remote sensing, meteorology and mapping of depth, elevation, soil and vegetation. This document defines the coverage concept including the relationship between the domain of a coverage and its associated attribute range. This document defines the characteristics of the domain. The characteristics of the attribute range are not defined in this document, but are defined in implementation standards. Consequently, the standardization target of this document consists of implementation standards, not concrete implementations themselves.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19156:2023(Main)
Geographic information - Observations, measurements and samples (ISO 19156:2023)
SIST EN ISO 19156:2023

This document defines a conceptual schema for observations, for features involved in the observation process, and for features involved in sampling when making observations. These provide models for the exchange of information describing observation acts and their results, both within and between different scientific and technical communities.
Observations commonly involve sampling of an ultimate feature-of-interest. This document defines a common set of sample types according to their spatial, material (for ex situ observations) or statistical nature. The schema includes relationships between sample features (sub-sampling, derived samples).
This document concerns only externally visible interfaces and places no restriction on the underlying implementations other than what is needed to satisfy the interface specifications in the actual situation.

  • Standard
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19157-1:2023(Main)
Geographic information - Data quality - Part 1: General requirements (ISO 19157-1:2023)
SIST EN ISO 19157-1:2023

This document establishes the principles for describing the quality of geographic data. It:
—    defines a well-considered system of components for describing data quality;
—    defines the process for defining additional, domain-specific components for describing data quality;
—    specifies components and the content structure of data quality measures;
—    describes general procedures for evaluating the quality of geographic data;
—    establishes principles for reporting data quality.
This document is applicable to data producers providing quality information to describe and assess how well a dataset conforms to its product specification and to data users attempting to determine whether or not specific geographic data are of sufficient quality for their particular application.
This document does not attempt to define minimum acceptable levels of quality for geographic data. Such information is usually present as a requirement in a data product specification, defined in accordance with ISO 19131, for example.

  • Standard
    112 pages
    English language
    sale 10% off
    e-Library read for
    1 day