EN ISO 21987:2017

Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2017)

ISO 21987:2017 specifies requirements and test methods for mounted spectacle lenses relative to the prescription order.

Augenoptik - Fertig montierte Korrektionsbrillengläser (ISO 21987:2017)

Optique ophtalmique - Verres ophtalmiques montés (ISO 21987:2017)

ISO 21987:2017 spécifie les exigences et les méthodes d'essai relatives aux verres de lunettes montés répondant à une spécification.

Očesna optika - Vdelana stekla očal (ISO 21987:2017)

Ta dokument določa zahteve in preskusne metode za vdelana stekla očal glede na predpisani recept.

General Information

• Status: Published
• Publication Date: 29-Aug-2017
• Withdrawal Date: 27-Feb-2018
• ICS: 11.040.70 - Ophthalmic equipment
• Technical Committee: CEN/TC 170 - Ophthalmic optics
• Drafting Committee: CEN/TC 170 - Ophthalmic optics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 30-Aug-2017
• Completion Date: 30-Aug-2017
• Directive: 2007/47/EC - Directive 2007/47/EC of the European Parliament and of the council of 5 September 2007 amending Council Directive 90/385/EEC on the approximation of the laws of the Member States relating to active implantable medical devices, Council Directive 93/42/EEC concerning medical devices and Directive 98/8/EC concerning the placing of biocidal products on the market
• Directive: 93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
• Mandate: M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
• Ref Project: SIST EN ISO 21987:2017 - Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2017)

Relations

• Replaces: EN ISO 21987:2009 - Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2009)
• Effective Date: 18-Dec-2013

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21987:2017
01-november-2017
1DGRPHãþD
SIST EN ISO 21987:2010
2þHVQDRSWLND9GHODQDVWHNODRþDO,62
Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2017)
Augenoptik - Fertig montierte Korrektionsbrillengläser (ISO 21987:2017)
Optique ophtalmique - Verres ophtalmiques montés (ISO 21987:2017)
Ta slovenski standard je istoveten z: EN ISO 21987:2017
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
SIST EN ISO 21987:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 21987:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 21987:2017


EN ISO 21987
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2017
EUROPÄISCHE NORM
ICS 11.040.70 Supersedes EN ISO 21987:2009
English Version

Ophthalmic optics - Mounted spectacle lenses (ISO
21987:2017)
Optique ophtalmique - Verres ophtalmiques montés Augenoptik - Fertig montierte Korrektionsbrillengläser
(ISO 21987:2017) (ISO 21987:2017)
This European Standard was approved by CEN on 26 May 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21987:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 21987:2017
EN ISO 21987:2017 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this document and the Essential
Requirements of Directive 93/42/EEC [OJ L 169] aimed to be covered . 5

2

---------------------- Page: 4 ----------------------

SIST EN ISO 21987:2017
EN ISO 21987:2017 (E)
European foreword
This document (EN ISO 21987:2017) has been prepared by Technical Committee ISO/TC 172 "Optics
and photonics" in collaboration with Technical Committee CEN/TC 170 “Ophthalmic optics” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 21987:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
The following referenced documents are indispensable for the application of this document. For
undated references, the latest edition of the referenced document (including any amendments) applies.
For dated references, only the edition cited applies. However, for any use of this standard ‘within the
meaning of Annex ZA’, the user should always check that any referenced document has not been
superseded and that its relevant contents can still be considered the generally acknowledged state-of-
art.
When an IEC or ISO standard is referred to in the ISO standard text, this shall be understood as a
normative reference to the corresponding EN standard, if available, and otherwise to the dated version
of the ISO or IEC standard, as listed below.
NOTE The
...