EN ISO 19085-2:2017
(Main)Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01)
Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017, Corrected version 2017-11-01)
This international standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to horizontal beam panel sawing machines with the saw carriage of the front cutting line mounted below the workpiece support, which are manually or mechanically loaded and/or unloaded, hereinafter referred to as "machines", when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also transport, assembly, dismantling, disabling and scrapping phases have been taken into account.
Holzbearbeitungsmaschinen - Sicherheit - Teil 2: Horizontale Plattenkreissägemaschinen mit Druckbalken (ISO 19085-2:2017, korrigierte Fassung 2017-11-01)
Machines à bois - Sécurité - Partie 2: Scies circulaires à panneaux horizontales à presseur (ISO 19085-2:2017, Version corrigée 2017-11-01)
Lesnoobdelovalni stroji - Varnost - 2. del: Formatne horizontalne krožne žage za razrez plošč (ISO 19085-2:2017, popravljena verzija )
Ta mednarodni standard zajema vsa večja tveganja, nevarne razmere in dogodke iz točke 4, ki se nanašajo na formatne horizontalne krožne žage za razrez plošč, ki imajo nosilec žage na sprednji liniji nameščen pod podporo obdelovanca in pri katerih se obdelovanci ročno ali mehansko podajajo in/ali odvzemajo, v nadaljevanju »stroji«, ko se upravljajo, prilagajajo in vzdržujejo skladno z njihovim namenom in pod pogoji, ki jih je določil proizvajalec, vključno s smiselno predvideno nepravilno uporabo. Upoštevane so bile tudi faze transporta, sestavljanja, razstavljanja in razrezovanja stroja.
General Information
Relations
Buy Standard
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19085-2:2017
01-december-2017
Nadomešča:
SIST EN 1870-13:2008+A2:2012
Lesnoobdelovalni stroji - Varnost - 2. del: Formatne horizontalne krožne žage za
razrez plošč (ISO 19085-2:2017, popravljena verzija )
Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing
machines (ISO 19085-2:2017, Corrected version 2017-11-01)
Holzbearbeitungsmaschinen - Sicherheit - Teil 2: Horizontale
Plattenkreissägemaschinen mit Druckbalken (ISO 19085-2:2017, korrigierte Fassung
2017-11-01)
Machines à bois - Sécurité - Partie 2: Scies circulaires à panneaux horizontales à
presseur (ISO 19085-2:2017, Version corrigée 2017-11-01)
Ta slovenski standard je istoveten z: EN ISO 19085-2:2017
ICS:
25.080.60 Strojne žage Sawing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN ISO 19085-2:2017 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19085-2:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 19085-2:2017
EN ISO 19085-2
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2017
EUROPÄISCHE NORM
ICS 13.110; 79.120.10 Supersedes EN 1870-13:2007+A2:2012
English Version
Woodworking machines - Safety - Part 2: Horizontal beam
panel circular sawing machines (ISO 19085-2:2017,
Corrected version 2017-11-01)
Machines à bois - Sécurité - Partie 2: Scies circulaires à Holzbearbeitungsmaschinen - Sicherheit - Teil 2:
panneaux horizontales à presseur (ISO 19085-2:2017, Horizontale Plattenkreissägemaschinen mit
Version corrigée 2017-11-01) Druckbalken (ISO 19085-2:2017, korrigierte Fassung
2017-11-01)
This European Standard was approved by CEN on 11 September 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19085-2:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19085-2:2017
EN ISO 19085-2:2017 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19085-2:2017
EN ISO 19085-2:2017 (E)
European foreword
This document (EN ISO 19085-2:2017) has been prepared by Technical Committee ISO/TC 39 “Machine
tools” in collaboration with Technical Committee CEN/TC 142 “Woodworking machines - Safety” the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound t
...
SLOVENSKI STANDARD
SIST EN ISO 19085-2:2017
01-december-2017
/HVQRREGHORYDOQLVWURML9DUQRVWGHO )RUPDWQHKRUL]RQWDOQHNURåQHåDJH]D
UD]UH]SORãþ ,62
Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing
machines (ISO 19085-2:2017)
Holzbearbeitungsmaschinen - Sicherheit - Teil 2: Horizontale Plattenkreissägemaschinen
mit Druckbalken (ISO 19085-2:2017)
Machines à bois - Sécurité - Partie 2: Scies circulaires à panneaux horizontales à
presseur (ISO 19085-2:2017)
Ta slovenski standard je istoveten z: EN ISO 19085-2:2017
ICS:
25.080.60 Strojne žage Sawing machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN ISO 19085-2:2017 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19085-2:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 19085-2:2017
EN ISO 19085-2
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2017
EUROPÄISCHE NORM
ICS 13.110; 79.120.10
English Version
Woodworking machines - Safety - Part 2: Horizontal beam
panel circular sawing machines (ISO 19085-2:2017)
Machines à bois - Sécurité - Partie 2: Scies circulaires à Holzbearbeitungsmaschinen - Sicherheit - Teil 2:
panneaux horizontales à presseur (ISO 19085-2:2017) Horizontale Plattenkreissägemaschinen mit
Druckbalken (ISO 19085-2:2017)
This European Standard was approved by CEN on 11 September 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19085-2:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19085-2:2017
EN ISO 19085-2:2017 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Directive 2006/42/EC . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19085-2:2017
EN ISO 19085-2:2017 (E)
European foreword
This document (EN ISO 19085-2:2017) has been prepared by Technical Committee ISO/TC 39 “Machine
tools” in collaboration with Technical Committee CEN/TC 142 “Woodworking machines - Safety” the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.