Respiratory protective devices - Methods of test - Part 7: Determination of particle filter penetration

This European Standard specifies the procedure for testing particle filter penetration for respiratory protective devices.

Atemschutzgeräte - Prüfverfahren - Teil 7: Bestimmung des Durchlasses von Partikelfiltern

Dieses Dokument legt das Verfahren zum Prüfen des Durchlasses von Partikelfiltern für Atemschutzgeräte fest.

Appareils de protection respiratoire - Méthodes d'essai - Partie 7: Détermination de la pénétration des filtres à particules

Le présent document spécifie le mode opératoire utilisé pour vérifier la pénétration des filtres à particules pour appareils de protection respiratoire.

Oprema za varovanje dihal - Metode preskušanja - 7. del: Ugotavljanje penetracije delcev skozi filter

Ta evropski standard določa postopek za preskušanje penetracije delcev skozi filter pri opremi za varovanje dihal.

General Information

Status
Published
Publication Date
18-Jun-2019
Withdrawal Date
30-Dec-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-Jun-2019
Due Date
03-Oct-2019
Completion Date
19-Jun-2019

Relations

Buy Standard

Standard
EN 13274-7:2019
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 13274-7:2018
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13274-7:2019
01-oktober-2019
Nadomešča:
SIST EN 13274-7:2008
Oprema za varovanje dihal - Metode preskušanja - 7. del: Ugotavljanje penetracije
delcev skozi filter
Respiratory protective devices - Methods of test - Part 7: Determination of particle filter
penetration
Atemschutzgeräte - Prüfverfahren - Teil 7: Bestimmung des Durchlasses von
Partikelfiltern
Appareils de protection respiratoire - Méthodes d'essai - Partie 7: Détermination de la
pénétration des filtres à particules
Ta slovenski standard je istoveten z: EN 13274-7:2019
ICS:
13.340.30 Varovalne dihalne naprave Respiratory protective
devices
SIST EN 13274-7:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13274-7:2019

---------------------- Page: 2 ----------------------
SIST EN 13274-7:2019


EN 13274-7
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2019
EUROPÄISCHE NORM
ICS 13.340.30 Supersedes EN 13274-7:2008
English Version

Respiratory protective devices - Methods of test - Part 7:
Determination of particle filter penetration
Appareils de protection respiratoire - Méthodes d'essai Atemschutzgeräte - Prüfverfahren - Teil 7:
- Partie 7: Détermination de la pénétration des filtres à Bestimmung des Durchlasses von Partikelfiltern
particules
This European Standard was approved by CEN on 5 May 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13274-7:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13274-7:2019
EN 13274-7:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Pre-requisites . 5
5 Test requirements . 6
5.1 General . 6
5.2 Nominal values and tolerances . 6
5.3 Penetration test . 6
5.4 Exposure test . 6
5.5 Storage test .
...

SLOVENSKI STANDARD
oSIST prEN 13274-7:2018
01-maj-2018
Oprema za varovanje dihal - Metode preskušanja - 7. del: Ugotavljanje penetracije
delcev v filter
Respiratory protective devices - Methods of test - Part 7: Determination of particle filter
penetration
Atemschutzgeräte - Prüfverfahren - Teil 7: Bestimmung des Durchlasses von
Partikelfiltern
Appareils de protection respiratoire - Méthodes d'essai - Partie 7: Détermination de la
pénétration des filtres à particules
Ta slovenski standard je istoveten z: prEN 13274-7
ICS:
13.340.30 Varovalne dihalne naprave Respiratory protective
devices
oSIST prEN 13274-7:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13274-7:2018

---------------------- Page: 2 ----------------------
oSIST prEN 13274-7:2018


DRAFT
EUROPEAN STANDARD
prEN 13274-7
NORME EUROPÉENNE

EUROPÄISCHE NORM

March 2018
ICS 13.340.30 Will supersede EN 13274-7:2008
English Version

Respiratory protective devices - Methods of test - Part 7:
Determination of particle filter penetration
Appareils de protection respiratoire - Méthodes d'essai Atemschutzgeräte - Prüfverfahren - Teil 7:
- Partie 7: Détermination de la pénétration des filtres à Bestimmung des Durchlasses von Partikelfiltern
particules
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 79.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13274-7:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13274-7:2018
prEN 13274-7:2018 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Pre-requisites . 5
5 Test requirements . 6
5.1 General . 6
5.2 Nominal values and tolerances . 6
5.3 Penetration test . 6
5.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.