EN 15683-1:2013

Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description

This European Standard specifies tolerances, flatness of web and flanges, flange deviation, edgework, fragmentation and physical and mechanical characteristics of monolithic thermally toughened soda lime silicate channel shaped safety glass for use in buildings.
Other requirements, not specified in this document, can apply to thermally toughened soda lime silicate channel shaped safety glass, which undergoes an additional treatment, e.g. coating. The additional requirements are specified in the appropriate product standard EN 15683-2. Thermally toughened soda lime silicate channel shaped safety glass, in this case, does not lose its mechanical or thermal characteristics.

Glas im Bauwesen - Thermisch vorgespanntes Kalknatron-Profilbau-Sicherheitsglas - Teil 1: Definition und Beschreibung

Diese Europäische Norm legt Toleranzen, Ebenheit von Steg und Flanschen, Flanschabweichung, Kanten-bearbeitung, Bruchverhalten sowie physikalische und mechanische Eigenschaften von einscheibigem, thermisch vorgespannten Kalknatron-Profilbau-Sicherheitsglas für den Gebrauch im Bauwesen fest.
An thermisch vorgespanntes Kalknatron-Profilbau-Sicherheitsglas können, wenn es weiterverarbeitet, z. B. beschichtet wird, andere Anforderungen gestellt werden, die in diesem Dokument nicht beschrieben sind. Die zusätzlichen Anforderungen sind in der entsprechenden Produktnorm EN 15683 2 festgelegt. In diesem Fall wird thermisch vorgespanntes Kalknatron-Profilbau-Sicherheitsglas seine mechanischen oder thermischen Eigenschaften nicht verlieren.

Verre dans la construction - Verre de silicate sodo-calcique profilé de sécurité trempé thermiquement - Partie 1 : Définition et description

La présente Norme européenne spécifie les tolérances, la planéité de la base et des ailes, l'écart de l'aile, la finition des chants, la fragmentation et les caractéristiques physiques et mécaniques du verre monolithique de silicate sodo-calcique profilé de sécurité trempé thermiquement pour l'utilisation dans la construction.
D'autres exigences, non spécifiées dans le présent document, peuvent s'appliquer au verre de silicate sodo-calcique profilé de sécurité trempé thermiquement, qui subit un traitement supplémentaire, par exemple une couche. Les exigences additionnelles sont spécifiées dans la norme de produit correspondante, EN 15682-2. Dans ce cas, le verre de silicate sodo-calcique profilé de sécurité trempé thermiquement ne perd pas ses caractéristiques mécaniques ou thermiques.

Steklo v gradbeništvu - Toplotno kaljeno natrij-kalcijevo silikatno utorjeno varnostno steklo - 1. del: Definicije in opis

Ta evropski standard določa toleranco, ploskost rebra in prirobnic, odstopanje prirobnic, obdelavo robov, drobljenje ter fizične in mehanske lastnosti monolitnega toplotno kaljenega natrij-kalcijevega silikatnega utorjenega varnostnega stekla, ki se uporablja v gradbeništvu. Druge zahteve, ki niso navedene v tem dokumentu, se lahko uporabljajo za toplotno kaljeno natrij-kalcijevo silikatno utorjeno varnostno steklo, ki se ga dodatno obdela, npr. z nanosi. Dodatne zahteve so določene v ustreznem standardu za izdelek EN 15683-2. Toplotno kaljeno natrij-kalcijevo silikatno utorjeno varnostno steklo v tem primeru ne izgubi mehanskih ali toplotnih lastnosti.

General Information

• Status: Published
• Publication Date: 23-Jul-2013
• Withdrawal Date: 30-Jan-2014
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 2 - Toughened, heat strengthened and enamelled glass
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 04-Mar-2019
• Completion Date: 04-Mar-2019
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 88/609/EEC - Limitation of emissions of certain pollutants into the air from large combustion plants
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: SIST EN 15683-1:2013 - Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steklo v gradbeništvu - Toplotno kaljeno natrij-kalcijevo silikatno utorjeno varnostno steklo - 1. del: Definicije in opisGlas im Bauwesen - Thermisch vorgespanntes Kalknatron-Profilbau-Sicherheitsglas - Teil 1: Definition und BeschreibungVerre dans la construction - Verre de silicate sodo-calcique profilé de sécurité trempé thermiquement - Partie 1 : Définition et descriptionGlass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:EN 15683-1:2013SIST EN 15683-1:2013en,fr,de01-november-2013SIST EN 15683-1:2013SLOVENSKI
STANDARD



SIST EN 15683-1:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15683-1
July 2013 ICS 81.040.20 English Version
Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description Verre dans la construction - Verre de silicate sodo-calcique profilé de sécurité trempé thermiquement - Partie 1 : Définition et description
Glas im Bauwesen - Thermisch vorgespanntes Kalknatron-Profilbau-Sicherheitsglas - Teil 1: Definition und Beschreibung This European Standard was approved by CEN on 30 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15683-1:2013: ESIST EN 15683-1:2013



EN 15683-1:2013 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .5 4 Glass products .6 5 Fracture characteristics .6 6 Dimensions and tolerances .6 6.1 General .6 6.2 Dimensions and dimensional tolerances .6 6.2.1 Nominal thickness (c) and thickness tolerances .6 6.2.2 Width, flange height and length (sizes) .6 6.3 Shape .7 6.3.1 Flange deviation.7 6.3.2 Squareness of cut, q .
...