EN ISO 1798:2008

Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)

ISO 1798:2008 specifies a method for determining the strength and deformation properties of flexible cellular materials when a test piece is extended at a constant rate until it breaks.

Weich-elastische polymere Schaumstoffe - Bestimmung der Zugfestigkeit und der Bruchdehnung (ISO 1798:2008)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Festigkeits- und Verformungseigenschaften von weich-elastischen Schaumstoffen fest, bei denen ein Probekörper mit einer konstanten Geschwindigkeit bis zum Bruch gedehnt wird.

Matériaux polymères alvéolaires souples - Détermination de la résistance à la traction et de l'allongement à la rupture (ISO 1798:2008)

L'ISO 1798:2008 spécifie une méthode de détermination de la résistance et des caractéristiques de déformation des matériaux alvéolaires souples lorsqu'une éprouvette est soumise à un allongement à vitesse constante jusqu'à la rupture.

Penjeni polimerni materiali - Ugotavljanje natezne trdnosti in raztezka pri pretrgu (ISO 1798:2008)

General Information

• Status: Published
• Publication Date: 31-Jan-2008
• Withdrawal Date: 30-Aug-2008
• ICS: 83.100 - Cellular materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 01-Feb-2008
• Completion Date: 01-Feb-2008
• Ref Project: SIST EN ISO 1798:2009 - Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)

Relations

• Replaces: EN ISO 1798:1999 - Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:1997)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Penjeni polimerni materiali - Ugotavljanje natezne trdnosti in raztezka pri pretrgu (ISO 1798:2008)Weich-elastische polymere Schaumstoffe - Bestimmung der Zugfestigkeit und der Bruchdehnung (ISO 1798:2008)Matériaux polymeres alvéolaires souples - Détermination de la résistance a la traction et de l'allongement a la rupture (ISO 1798:2008)Flexible cellular polymeric materials - Determination of tensile strength and elongation at break (ISO 1798:2008)83.100Penjeni polimeriCellular materialsICS:Ta slovenski standard je istoveten z:EN ISO 1798:2008SIST EN ISO 1798:2009en,fr,de01-februar-2009SIST EN ISO 1798:2009SLOVENSKI
STANDARDSIST EN ISO 1798:20001DGRPHãþD



SIST EN ISO 1798:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 1798February 2008ICS 83.100Supersedes EN ISO 1798:1999
English VersionFlexible cellular polymeric materials - Determination of tensilestrength and elongation at break (ISO 1798:2008)Matériaux polymères alvéolaires souples - Déterminationde la résistance à la traction et de l'allongement à larupture (ISO 1798:2008)Weich-elastische polymere Schaumstoffe - Bestimmungder Zugfestigkeit und der Bruchdehnung (ISO 1798:2008)This European Standard was approved by CEN on 12 January 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 1798:2008: ESIST EN ISO 1798:2009



EN ISO 1798:2008 (E) 2 Contents Page Foreword.3
SIST EN ISO 1798:2009



EN ISO 1798:2008 (E) 3 Foreword This document (EN ISO 1798:2008) has been prepared by Technical Committee ISO/TC 45 "Rubber and rubber products" in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2008, and conflicting national standards shall be withdrawn at the latest by August 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 1798:1999. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 1798:2008 has been approved by CEN as a EN ISO 1798:2008 without any modification.
SIST EN ISO 1798:2009



SIST EN ISO 1798:2009



Reference numberISO 1798:2008(E)© ISO 2008
INTERNATIONAL STANDARD ISO1798Fourth edition2008-02-01Flexible cellular polymeric materials — Determination of tensile strength and elongation at break Matériaux polymères alvéolaires souples — Détermination de la résistance à la traction et de l'allongement à la rupture
SIST EN ISO 1798:2009



ISO 1798:2008(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO
...