EN 17038-2:2019

Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units

This document specifies methods and procedures for testing, calculating and determining the Energy Efficiency Index (EEI) of rotodynamic glanded single pump units for pumping clean water, including where integrated in other products.
The pump types and sizes covered by this document are described in the normative Annex A.

Pumpen - Methoden zur Qualifikation und Verifikation des Energieeffizienzindexes für Kreiselpumpen - Teil 2: Prüfung und Berechnung des Energieeffizienzindexes (EEI) einzelner Pumpenaggregate

Dieses Dokument legt Methoden und Verfahren für die Prüfung, Berechnung und Bestimmung des Energieeffizienzindex (EEI) von Trockenläufer-Kreiselpumpenaggregaten zum Pumpen von sauberem Wasser fest, auch wenn sie in andere Produkte integriert sind.
Die von diesem Dokument behandelten Pumpentypen und -größen werden im normativen Anhang A aufgeführt.

Pompes - Méthodes de qualification et de vérification de l'indice de rendement énergétique des groupes motopompes rotodynamiques - Partie 2 : Essais et calcul de l'indice de rendement énergétique (EEI) des groupes motopompes simples

Le présent document spécifie des méthodes et procédures d'essai, de calcul et de détermination de l'indice de rendement énergétique (EEI) des groupes motopompes à eau rotodynamiques dotés d'un dispositif d'étanchéité utilisés pour le pompage d'eau propre, y compris dans des versions intégrées à d'autres produits.
Les types et tailles de pompes couverts par le présent document sont décrits dans l'Annexe A normative.

Črpalke - Metode za kvalifikacijo in verifikacijo indeksa energijske učinkovitosti centrifugalnih črpalk - 2. del: Preskušanje in računanje indeksa energijske učinkovitosti (IEE) enodelnih črpalk

Ta evropski standard določa metode in postopke za preskušanje, računanje in določanje indeksa energijske učinkovitosti (EEI) centrifugalnih tesnilnih enodelnih črpalk za črpanje čiste vode, vključno z vgrajenimi črpalkami v ostalih proizvodih.
Vrste in velikosti črpalk, zajetih v tem standardu, so opisane v normativnem dodatku A.

General Information

• Status: Published
• Publication Date: 07-May-2019
• Withdrawal Date: 29-Nov-2019
• ICS: 23.080 - Pumps
• ICS: 27.015 - Energy efficiency. Energy conservation in general
• Technical Committee: CEN/TC 197 - Pumps
• Drafting Committee: CEN/TC 197/SC 3/WG 1 - Water pumps efficiency
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 08-May-2019
• Due Date: 29-Mar-2018
• Completion Date: 08-May-2019
• Directive: 547/2012 - Commission Regulation (EU) No 547/2012 of 25 June 2012 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for water pumps
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/498 - Mandate to CEN, CENELEC and ETSI in the field of pumps
• Ref Project: SIST EN 17038-2:2019 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 2: Testing and calculation of energy Efficiency Index (EEI) of single pump units

Relations

• Corrected By: EN 17038-2:2019/AC:2021 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
• Effective Date: 16-Jun-2021
• Corrected By: EN 17038-2:2019/AC:2020 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units
• Effective Date: 11-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17038-2:2019
01-julij-2019
Črpalke - Metode za kvalifikacijo in verifikacijo indeksa energijske učinkovitosti
centrifugalnih črpalk - 2. del: Preskušanje in računanje indeksa energijske
učinkovitosti (IEE) enodelnih črpalk
Pumps - Methods of qualification and verification of the Energy Efficiency Index for
rotodynamic pumps units - Part 2: Testing and calculation of energy Efficiency Index
(EEI) of single pump units
Pumpen - Methoden zur Qualifikation und Verifikation des Energieeffizienzindexes für
Kreiselpumpen - Teil 2: Prüfung und Berechnung des Energieeffizienzindexes (EEI)
einzelner Pumpenaggregate
Pompes - Méthodes de qualification et de vérification de l'indice de rendement
énergétique des groupes motopompes rotodynamiques - Partie 2 : Essais et calcul de
l'indice de rendement énergétique (EEI) des groupes motopompes simples
Ta slovenski standard je istoveten z: EN 17038-2:2019
ICS:
23.080 Črpalke Pumps
27.015 Energijska učinkovitost. Energy efficiency. Energy
Ohranjanje energije na conservation in general
splošno
SIST EN 17038-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 17038-2:2019

---------------------- Page: 2 ----------------------

SIST EN 17038-2:2019


EN 17038-2
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2019
EUROPÄISCHE NORM
ICS 23.080
English Version

Pumps - Methods of qualification and verification of the
Energy Efficiency Index for rotodynamic pump units - Part
2: Testing and calculation of Energy Efficiency Index (EEI)
of single pump units
Pompes - Méthodes de qualification et de vérification Pumpen - Methoden zur Qualifikation und Verifikation
de l'indice de rendement énergétique des groupes des Energieeffizienzindexes für Kreiselpumpen - Teil 2:
motopompes rotodynamiques - Partie 2 : Essais et Prüfung und Berechnung des Energieeffizienzindexes
calcul de l'indice de rendement énergétique (EEI) des (EEI) einzelner Pumpenaggregate
groupes motopompes simples
This European Standard was approved by CEN on 15 July 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17038-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 17038-2:2019
EN 17038-2:2019 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Reference flow-time profiles and reference pressure control curves . 8
4.1 General . 8
4.2 Reference flow-time profiles .
...