Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013)

ISO 9606-1:2012 specifies the requirements for qualification testing of welders for fusion welding of steels.
It provides a set of technical rules for a systematic qualification test of the welder, and enables such qualifications to be uniformly accepted independently of the type of product, location and examiner or examining body.
When qualifying welders, the emphasis is placed on the welder's ability manually to manipulate the electrode, welding torch or welding blowpipe, thereby producing a weld of acceptable quality.
The welding processes referred to in ISO 9606-1:2012 include those fusion-welding processes which are designated as manual or partly mechanized welding. It does not cover fully mechanized and automated welding processes.

Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012, einschließlich Cor 1:2012 und Cor 2:2013)

Épreuve de qualification des soudeurs - Soudage par fusion - Partie 1 : Aciers (ISO 9606-1:2012, y compris Cor 1:2012 et Cor 2:2013)

L'ISO 9606-1:2012 définit les exigences relatives à l'épreuve de qualification des soudeurs pour le soudage par fusion des aciers.
Elle fournit un ensemble de règles techniques pour l'épreuve de qualification systématique des soudeurs et permet à de telles qualifications d'être acceptées uniformément, indépendamment du type de produit, du lieu et de l'examinateur ou de l'organisme d'examen.
Lors de la qualification des soudeurs, l'accent est porté sur l'aptitude du soudeur à guider manuellement l'électrode, la torche ou le chalumeau de soudage afin de produire une soudure de qualité acceptable.
Les procédés de soudage concernés par l'ISO 9606-1:2012 sont les procédés de soudage par fusion désignés comme manuels ou semi-automatiques. L'ISO 9606-1:2012 n'est pas applicable aux procédés de soudage totalement mécanisés et automatisés.

Preskušanje usposobljenosti varilcev - Talilno varjenje - 1. del: Jekla (ISO 9606-1:2012, vključuje popravka Cor 1:2012 in Cor 2:2013)

V primerjavi s SIST EN ISO 9606-1:2013 sta dodana le Annexa ZA (povezava z direktivo 2014/68/EU (PED)) in ZB (povezava z direktivo 2014/29/EU (SPVD)).
Standard ISO 9606-1:2012 določa zahteve za preskušanje usposobljenosti varilcev pri talilnem varjenju jekel.
Podaja niz tehničnih pravil za sistematično preskušanje usposobljenosti varilcev in omogoča, da so taka usposabljanja povsod priznana, ne glede na vrsto proizvoda, lokacijo in preizkuševalca oziroma komisijo.
Pri usposabljanju varilcev je poudarjena sposobnost varilca za ročno upravljanje elektrode, plamena ali gorilnika za varjenje, da proizvede zvar sprejemljive kakovosti.
Postopki varjenja, navedeni v standardu ISO 9606-1:2012, vključujejo postopke talilnega varjenja, ki se uporabljajo za ročno ali delno mehanizirano varjenje. Popolnoma mehaniziranih in avtomatiziranih postopkov varjenja ne obravnava v celoti.

General Information

Status
Published
Publication Date
22-Aug-2017
Withdrawal Date
27-Feb-2018
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
23-Aug-2017
Due Date
01-Dec-2018
Completion Date
23-Aug-2017

Relations

Buy Standard

Standard
EN ISO 9606-1:2018 (EN) - Cor2 velja samo za FR-jezik, ni dodan k SIST standardu. V primerjavi s SIST EN ISO 9606-1:2013 sta dodana le Annexa ZA (povezava z direktivo 2014/68/EU (PED)) in ZB (povezava z direktivo 2014/29/EU (SPVD)).
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
EN ISO 9606-1:2018 (DE)
German language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 9606-1:2016 - V primerjavi s EN ISO 9606-1:2013 sta dodana le Annexa ZA (povezava z direktivo 2014/68/EU (PED)) in ZB (povezava z direktivo 2014/29/EU (SPVD)).
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9606-1:2018
01-oktober-2018
1DGRPHãþD
SIST EN ISO 9606-1:2013
3UHVNXãDQMHXVSRVREOMHQRVWLYDULOFHY7DOLOQRYDUMHQMHGHO-HNOD ,62
YNOMXþXMHSRSUDYND&RULQ&RU
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012
including Cor 1:2012 and Cor 2:2013)
Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012,
einschließlich Cor 1:2012 und Cor 2:2013)
Épreuve de qualification des soudeurs - Soudage par fusion - Partie 1 : Aciers (ISO 9606
-1:2012, y compris Cor 1:2012 et Cor 2:2013)
Ta slovenski standard je istoveten z: EN ISO 9606-1:2017
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
77.080.20 Jekla Steels
SIST EN ISO 9606-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9606-1:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 9606-1:2018


EN ISO 9606-1
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2017
EUROPÄISCHE NORM
ICS 25.160.01 Supersedes EN ISO 9606-1:2013
English Version

Qualification testing of welders - Fusion welding - Part 1:
Steels (ISO 9606-1:2012 including Cor 1:2012 and Cor
2:2013)
Épreuve de qualification des soudeurs - Soudage par Prüfung von Schweißern - Schmelzschweißen - Teil 1:
fusion - Partie 1 : Aciers (ISO 9606-1:2012, y compris Stähle (ISO 9606-1:2012, einschließlich Cor 1:2012
Cor 1:2012 et Cor 2:2013) und Cor 2:2013)
This European Standard was approved by CEN on 16 July 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9606-1:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9606-1:2018
EN ISO 9606-1:2017 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Directive 2014/68/EU [2014 OJ L 189] (PED) aimed to be
covered. 4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/29/EU (SPVD) [2014 OJ L96] . 5

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9606-1:2018
EN ISO 9606-1:2017 (E)
European foreword
The text of ISO 9606-1:2012 including Cor 1:2012 and Cor 2:2013 has been prepared by Technical
Committee ISO/TC 44 “Welding and allied processes” of the International Organization for
Standardization (ISO) and has been taken over as EN ISO 9606-1:2017 by Technical Committee
CEN/TC 121 “Welding and allied processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2018, and conflicting national standards
shall be withdrawn at the latest by February 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9606-1:2013.
This document has been prepared under a
...

SLOVENSKI STANDARD
SIST EN ISO 9606-1:2018
01-oktober-2018
Nadomešča:
SIST EN ISO 9606-1:2013
Preskušanje usposobljenosti varilcev - Talilno varjenje - 1. del: Jekla (ISO 9606-
1:2012, vključuje popravka Cor 1:2012 in Cor 2:2013)
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012
including Cor 1:2012 and Cor 2:2013)
Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012,
einschließlich Cor 1:2012 und Cor 2:2013)
Épreuve de qualification des soudeurs - Soudage par fusion - Partie 1 : Aciers (ISO 9606
-1:2012, y compris Cor 1:2012 et Cor 2:2013)
Ta slovenski standard je istoveten z: EN ISO 9606-1:2017
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
77.080.20 Jekla Steels
SIST EN ISO 9606-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 9606-1:2018

---------------------- Page: 2 ----------------------
SIST EN ISO 9606-1:2018


EN ISO 9606-1
EUROPÄISCHE NORM

EUROPEAN STANDARD

August 2017
NORME EUROPÉENNE
ICS 25.160.01 Ersatz für EN ISO 9606-1:2013
Deutsche Fassung

Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle
(ISO 9606-1:2012, einschließlich Cor 1:2012 und Cor 2:2013)
Qualification testing of welders - Fusion welding - Part Épreuve de qualification des soudeurs - Soudage par
1: Steels (ISO 9606-1:2012 including Cor 1:2012 and fusion - Partie 1 : Aciers (ISO 9606-1:2012, y compris
Cor 2:2013) Cor 1:2012 et Cor 2:2013)
Diese Europäische Norm wurde vom CEN am 16. Juli 2017 angenommen.

Die CEN-Mitglieder sind gehalten, die CEN/CENELEC-Geschäftsordnung zu erfüllen, in der die Bedingungen festgelegt sind, unter
denen dieser Europäischen Norm ohne jede Änderung der Status einer nationalen Norm zu geben ist. Auf dem letzten Stand
befindliche Listen dieser nationalen Normen mit ihren bibliographischen Angaben sind beim CEN-CENELEC-Management-
Zentrum oder bei jedem CEN-Mitglied auf Anfrage erhältlich.

Diese Europäische Norm besteht in drei offiziellen Fassungen (Deutsch, Englisch, Französisch). Eine Fassung in einer anderen
Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und dem
Management-Zentrum mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen
jugoslawischen Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland,
Litauen, Luxemburg, Malta, den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz,
Serbien, der Slowakei, Slowenien, Spanien, der Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und
Zypern.





EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

CEN-CENELEC Management-Zentrum: Avenue Marnix 17, B-1000 Brüssel
© 2017 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. EN ISO 9606-1:2017 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN
vorbehalten.

---------------------- Page: 3 ----------------------
SIST EN ISO 9606-1:2018
EN ISO 9606-1:2017 (D)
Inhalt
Seite
Europäisches Vorwort . 4
Anhang ZA (informativ) Zusammenhang zwischen dieser Europäischen Norm und den
grundlegenden Anforderungen der abzudeckenden EU-Richtlinie 2014/68/EU [2014
ABL L 189] (PED) . 5
Anhang ZB (informativ) Zusammenhang zwischen dieser Europäischen Norm und den
grundlegenden Anforderungen der abzudeckenden EU-Richtlinie 2014/29/EU (SPVD)
[2014 ABL L96] . 6
Vorwort . 7
Einleitung . 8
1 Anwendungsbereich . 9
2 Normative Verweisungen .
...

SLOVENSKI STANDARD
oSIST prEN ISO 9606-1:2016
01-julij-2016
Preskušanje usposobljenosti varilcev - Talilno varjenje - 1. del: Jekla (ISO 9606-
1:2012)
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012)
Prüfung von Schweißern - Schmelzschweißen - Teil 1: Stähle (ISO 9606-1:2012)
Épreuve de qualification des soudeurs - Soudage par fusion - Partie 1: Aciers (ISO 9606-
1:2012)
Ta slovenski standard je istoveten z: prEN ISO 9606-1
ICS:
03.100.30 Vodenje ljudi Management of human
resources
25.160.10 Varilni postopki in varjenje Welding processes
77.080.20 Jekla Steels
oSIST prEN ISO 9606-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 9606-1:2016

---------------------- Page: 2 ----------------------
oSIST prEN ISO 9606-1:2016


DRAFT
EUROPEAN STANDARD
prEN ISO 9606-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2016
ICS 25.160.01 Will supersede EN ISO 9606-1:2013
English Version

Qualification testing of welders - Fusion welding - Part 1:
Steels (ISO 9606-1:2012)
Épreuve de qualification des soudeurs - Soudage par Prüfung von Schweißern - Schmelzschweißen - Teil 1:
fusion - Partie 1: Aciers (ISO 9606-1:2012) Stähle (ISO 9606-1:2012)
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 121.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 9606-1:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 9606-1:2016
prEN ISO 9606-1:2016 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Directive 2014/68/EU (PED) aimed to be covered . 4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/29/EU (SPVD) . 5


2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 9606-1:2016
prEN ISO 9606-1:2016 (E)
European foreword
The text of ISO 9606-1:2012 has been prepared by Technical Committee ISO/TC 44 “Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as prEN
ISO 9606-1:2016 by Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of
which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN ISO 9606-1:2013.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives 2014/68/EU
and 2014/29/EU.
For relationship with EU Directives, see informative Annex ZA and ZB, which is an integral part of this
document.
Endorsement notice
The text of ISO 9606-1:2012 has been approved by CEN as prEN ISO 9606-1:2016 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 9606-1:2016
prEN ISO 9606-1:2016 (E
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.