EN 622-4:2024
(Main)Fibreboards - Specifications - Part 4: Requirements for softboards
Fibreboards - Specifications - Part 4: Requirements for softboards
This document specifies the requirements for softboards as defined in EN 316, with a density from 230 kg/ m3 to 400 kg/ m3.
The values listed in this document relate to product properties but they are not characteristic values to be used in design calculations.
NOTE Panels which are intended for use exclusively as thermal insulating products are covered by EN 13171.
Faserplatten - Anforderungen - Teil 4: Anforderungen an poröse Platten
Dieses Dokument legt die Anforderungen an poröse Platten nach EN 316 mit einer Rohdichte von 230 kg/m3 bis 400 kg/m3 fest.
Die in diesem Dokument angegebenen Werte beziehen sich auf Produkteigenschaften; es sind keine charakteristischen Werte, die für konstruktive Berechnungen verwendet werden können.
ANMERKUNG Für Platten, die ausschließlich zur Verwendung als Wärmedämmprodukte vorgesehen sind, werden durch EN 13171 abgedeckt.
Panneaux de fibres - Exigences - Partie 4 : Exigences pour panneaux isolants
Le présent document spécifie les exigences pour panneaux isolants tels que définis dans l'EN 316 avec une masse volumique de 230 kg/m3 à 400 kg/m3.
Les valeurs données dans le présent document concernent les caractéristiques du produit, mais elles ne sont pas les valeurs caractéristiques à utiliser dans les calculs de conception.
NOTE Les panneaux destinés à être utilisés uniquement comme panneaux isolants thermiques sont couverts par la norme EN 13171.
Vlaknene plošče - Specifikacije - 4. del: Zahteve za mehke plošče
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 622-4:2023
01-november-2023
Vlaknene plošče - Specifikacije - 4. del: Zahteve za mehke plošče
Fibreboards - Specifications - Part 4: Requirements for softboards
Faserplatten - Anforderungen - Teil 4: Anforderungen an poröse Platten
Panneaux de fibres - Exigences - Partie 4 : Exigences pour panneaux isolants
Ta slovenski standard je istoveten z: prEN 622-4
ICS:
79.060.20 Vlaknene in iverne plošče Fibre and particle boards
oSIST prEN 622-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 622-4:2023
---------------------- Page: 2 ----------------------
oSIST prEN 622-4:2023
DRAFT
EUROPEAN STANDARD
prEN 622-4
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2023
ICS 79.060.20 Will supersede EN 622-4:2019
English Version
Fibreboards - Specifications - Part 4: Requirements for
softboards
Panneaux de fibres - Exigences - Partie 4 : Exigences Faserplatten - Anforderungen - Teil 4: Anforderungen
pour panneaux isolants an poröse Platten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 112.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 622-4:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 622-4:2023
prEN 622-4:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 6
4.1 General. 6
4.2 Requirements for general purpose boards . 6
4.2.1 Requirements for boards for use in dry conditions . 6
4.2.2 Requirements for boards for use in humid conditions . 6
4.2.3 Requirements for boards for use in external conditions . 6
4.3 Requirements for load-bearing boards . 7
4.3.1 Requirements for boards for use in dry conditions . 7
4.3.2 Requirements for boards for use in humid conditions . 7
5 Verification of compliance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.