EN ISO 24197:2022

Vapour products - Determination of e-liquid vaporised mass and aerosol collected mass (ISO 24197:2022)

This document specifies a method of measurement of the masses of e-liquid vaporised and the aerosol collected from vapour product(s).
It does not specify the vapour product(s), the vapour product(s) operational settings or, e-liquid to be used.
NOTE       Application of this document can be required as a preliminary step for subsequent analyses.

Dampfprodukte - Bestimmung der Masse des verdampften E-Liquids und der gesammelten Aerosolmasse (ISO 24197:2022)

Dieses Dokument legt ein Verfahren zur Messung der verdampften E-Liquid-Masse und der gesammelten Aerosolmasse von Dampfprodukt(en) fest.
Es legt nicht das/die zu verwendende(n) Dampfprodukt(e), die Betriebseinstellungen des/der Dampfprodukte(s) oder das zu verwendende E-Liquid fest.
ANMERKUNG   Die Anwendung dieses Dokuments kann als ein vorbereitender Schritt vor den anschließenden Analysen erforderlich sein.

Produits de vapotage - Détermination de la masse de e-liquide vaporisé et de la masse d’aérosol collecté (ISO 24197:2022)

Le présent document spécifie une méthode de mesure de la masse de e-liquide vaporisé et de la masse d’aérosol collecté à partir du ou des produits de vapotage.
Il ne spécifie ni le ou les produits de vapotage, ni les réglages opérationnels du ou des produits de vapotage, ni le e-liquide à utiliser.
NOTE            L’application du présent document peut être requise en tant qu’étape préliminaire en vue d’analyses ultérieures.

Hlapni proizvodi - Ugotavljanje mase izhlapele e-tekočine in mase zbranega aerosola (ISO 24197:2022)

Ta dokument določa metodo za merjenje izgube mase pri e-hlapnih proizvodih.
Opredeljuje parametre in določa standardne pogoje za merjenje izgube mase hlapnega proizvoda (razlika med maso napolnjenega hlapnega proizvoda pred in po več vdihih).
Ne določa hlapnega proizvoda, njegovih parametrov ali uporabljene e-tekočine.

General Information

• Status: Published
• Publication Date: 22-Nov-2022
• ICS: 65.160 - Tobacco, tobacco products and related equipment
• Technical Committee: CEN/TC 437 - Electronic cigarettes and e-liquids
• Drafting Committee: CEN/TC 437 - Electronic cigarettes and e-liquids
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 23-Nov-2022
• Completion Date: 23-Nov-2022
• Ref Project: SIST EN ISO 24197:2023 - Vapour products - Determination of e-liquid vaporised mass and aerosol collected mass (ISO 24197:2022)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24197:2023
01-januar-2023
Hlapni proizvodi - Ugotavljanje mase izhlapele e-tekočine in mase zbranega
aerosola (ISO 24197:2022)
Vapour products - Determination of e-liquid vaporised mass and aerosol collected mass
(ISO 24197:2022)
Dampfprodukte- Bestimmung verdampfter E-Liquid-Masse und gesammelter
Aerosolmasse (ISO 24197:2022)
Produits de vapotage - Détermination de la masse de e-liquide vaporisé et de la masse
d’aérosol collecté (ISO 24197:2022)
Ta slovenski standard je istoveten z: EN ISO 24197:2022
ICS:
65.160 Tobak, tobačni izdelki in Tobacco, tobacco products
oprema and related equipment
SIST EN ISO 24197:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 24197:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 24197:2023


EN ISO 24197
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2022
EUROPÄISCHE NORM
ICS 65.160
English Version

Vapour products - Determination of e-liquid vaporised
mass and aerosol collected mass (ISO 24197:2022)
Produits de vapotage - Détermination de la masse de e- Dampfprodukte- Bestimmung verdampfter E-Liquid-
liquide vaporisé et de la masse d'aérosol collecté Masse und gesammelter Aerosolmasse (ISO/FDIS
(ISO/FDIS 24197:2022) 24197:2022)
This European Standard was approved by CEN on 14 November 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24197:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 24197:2023
EN ISO 24197:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 24197:2023
EN ISO 24197:2022 (E)
European foreword
This document (EN ISO 24197:2022) has been prepared by Technical Committee ISO/TC 126 "Tobacco
and tobacco products" in collaboration with Technical Committee CEN/TC 437 “Electronic cigarettes
and e-liquids” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 24197:2022 has been approved by CEN as EN ISO 24197:2022 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 24197:2023

---------------------- Page: 6 ----------------------
SIST EN ISO 24197:
...