Energy performance of buildings - Determination and reporting of Primary Energy Factors (PEF) and CO2 emission coefficient - General Principles, Module M1-7

This document provides a transparent framework for reporting on the choices related to the procedure to determine primary energy factors (PEFs) and CO2 emission coefficients for energy delivered to and exported from the buildings as described in EN ISO 52000-1.
This document specifies the choices to be made to calculate the PEF(s) and CO2 emission coefficients related to different energy carriers. PEFs and CO2 emission coefficients for exported energy can be different from those chosen for delivered energy.
This document is primarily intended for supporting and complementing EN ISO 52000-1, as the latter requires values for the PEFs and CO2 emission coefficients to complete the EPB calculation. But it can also be used for other applications.
NOTE   The CO2 emission coefficients allow calculating greenhouse gas emissions. According to the choices made, the CO2 emission coefficients represent only CO2 emissions or also other greenhouse gases.
Table 1 shows the position (marked by "X") of this document within the modular structure as set out in EN ISO 52000-1.
The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively.

Energieeffizienz von Gebäuden - Bestimmung und Berichterstattung von Primärenergiefaktoren (PEF) und CO2-Emissionsfaktoren - Allgemeine Grundsätze, Modul M1-7

Dieses Dokument bietet einen transparenten Rahmen für die Berichterstattung zu Entscheidungen, die mit dem Verfahren zur Bestimmung der Primärenergiefaktoren (PEFs) und CO2-Emissionskoeffizienten für Gebäuden zugeführte und aus ihnen abgeführte Energie, wie in EN ISO 52000 1 beschrieben, zusammen¬hängen.
In diesem Dokument werden die Entscheidungen dargelegt, die in Bezug auf die Berechnung von PEF(s) und CO2-Emissionskoeffizienten, die mit verschiedenen Energieträgern zusammenhängen, zu treffen sind. PEFs und CO2-Emissionskoeffizienten für abgeführte Energie können sich von jenen, die für zugeführte Energie ausgewählt wurden, unterscheiden.
Dieses Dokument ist hauptsächlich zur Unterstützung und Ergänzung von EN ISO 52000 1 vorgesehen, da Letztere Werte für die PEFs und CO2-Emissionskoeffizienten zur Durchführung der EPB-Berechnung erfordert. Es kann auch für andere Anwendungen genutzt werden.
ANMERKUNG Die CO2-Emissionskoeffizienten ermöglichen die Berechnung von Treibhausgasemissionen. Die CO2 Emissionskoeffizienten stellen entsprechend den getroffenen Entscheidungen nur CO2-Emissionen oder auch andere Treibhausgase dar.
Tabelle 1 zeigt die Position (durch ein „X“ gekennzeichnet) dieses Dokuments innerhalb der modularen Struktur wie in EN ISO 52000 1 dargestellt an.
Die Module repräsentieren EPB Normen, auch wenn eine EPB Norm mehr als ein Modul abdecken kann und ein Modul von mehr als einer EPB Norm abgedeckt werden kann, zum Beispiel jeweils ein vereinfachtes und ein detailliertes Verfahren.

Performance énergétique des bâtiments - Détermination et déclaration des facteurs d'énergie primaire (PEF) et du coefficient d'émission de CO₂ - Principes généraux, Module M1-7

Le présent document offre un cadre transparent pour déclarer les choix de mode opératoire visant à déterminer les facteurs d’énergie primaire ainsi que les coefficients d’émission de CO2 de l’énergie livrée aux bâtiments et de l’énergie exportée par le bâtiment, tel que décrit dans l’EN ISO 52000-1.
Le présent document spécifie les choix à effectuer afin de calculer les PEF et les coefficients d’émission de CO2 relatifs à différents vecteurs énergétiques. Les PEF et les coefficients d’émission de CO2 de l’énergie exportée par le bâtiment peuvent différer de ceux choisis pour l’énergie livrée au bâtiment.
Le présent document est essentiellement une norme complémentaire à l’EN ISO 52000-1, car cette dernière exige que les valeurs de PEF et de coefficients d’émission de CO2 viennent compléter le calcul PEB. Elle peut cependant être utilisée pour d’autres applications.
NOTE   Les coefficients d’émission de CO2 permettent de calculer les émissions de gaz à effet de serre. Selon les choix effectués, les coefficients d’émission de CO2 ne représentent que les émissions de CO2 ou également d’autres gaz à effet de serre.
Le Tableau 1 montre la position (marquée par un « X ») du présent document au sein de la structure modulaire définie par l’EN ISO 52000-1.
Les modules représentent les normes PEB. Une norme PEB peut toutefois couvrir plusieurs modules et un module peut toutefois être couvert par plusieurs normes PEB (par exemple, par une méthode simplifiée et par une méthode détaillée respectivement).

Energijske lastnosti stavb - Določanje in poročanje o faktorjih primarne energije (PEF) in emisijskem koeficientu CO2 - Splošna načela - Modul M1-7

General Information

Status
Published
Publication Date
10-Nov-2020
Withdrawal Date
30-May-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Nov-2020
Due Date
27-Feb-2021
Completion Date
11-Nov-2020

Buy Standard

Standard
EN 17423:2021 - BARVE
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 17423:2019 - BARVE
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 17423:2021
01-januar-2021
Energijske lastnosti stavb - Določanje in poročanje o faktorjih primarne energije
(PEF) in emisijskem koeficientu CO2 - Splošna načela - Modul M1-7
Energy performance of buildings - Determination and reporting of Primary Energy
Factors (PEF) and CO2 emission coefficient - General Principles, Module M1-7
Energieeffizienz von Gebäuden - Bestimmung und Berichterstattung von
Primärenergiefaktoren (PEF) und CO2-Emissionsfaktoren
Performance énergétique des bâtiments - Détermination et déclaration des facteurs
d’énergie primaire (PEF) et du coefficient d’émission de CO2 - Principes généraux,
Module M1-7
Ta slovenski standard je istoveten z: EN 17423:2020
ICS:
13.040.01 Kakovost zraka na splošno Air quality in general
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN 17423:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17423:2021

---------------------- Page: 2 ----------------------
SIST EN 17423:2021


EN 17423
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2020
EUROPÄISCHE NORM
ICS 13.040.01; 91.120.10
English Version

Energy performance of buildings - Determination and
reporting of Primary Energy Factors (PEF) and CO2
emission coefficient - General Principles, Module M1-7
Performance énergétique des bâtiments - Energieeffizienz von Gebäuden - Bestimmung und
Détermination et déclaration des facteurs d'énergie Berichterstattung von Primärenergiefaktoren (PEF)
primaire (PEF) et du coefficient d'émission de CO2 - und CO2-Emissionsfaktoren
Principes généraux, Module M1-7
This European Standard was approved by CEN on 4 October 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17423:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 17423:2021
EN 17423:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 8
3 Terms and definitions . 8
4 Symbols, subscripts and abbreviations. 10
4.1 Symbols . 10
4.2 Subscripts . 11
4.3 Abbreviations . 11
5 General description of the methods and choices . 12
5.1 Basic principles of the assessment metho
...

SLOVENSKI STANDARD
oSIST prEN 17423:2019
01-september-2019
Energijske lastnosti stavb - Določanje in poročanje o faktorjih primarne energije
(PEF) in emisijskem koeficientu CO2 - Splošna načela, Modul M1-7
Energy performance of buildings - Determination and reporting of Primary Energy
Factors (PEF) and CO2 emission coefficient - General Principles, Module M1-7
Energieeffizienz von Gebäuden - Bestimmung und Berichterstattung von
Primärenergiefaktoren (PEF) und CO2-Emissionsfaktoren
Ta slovenski standard je istoveten z: prEN 17423
ICS:
13.040.01 Kakovost zraka na splošno Air quality in general
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
oSIST prEN 17423:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17423:2019

---------------------- Page: 2 ----------------------
oSIST prEN 17423:2019


DRAFT
EUROPEAN STANDARD
prEN 17423
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2019
ICS 13.040.01; 91.120.10
English Version

Energy performance of buildings - Determination and
reporting of Primary Energy Factors (PEF) and CO2
emission coefficient - General Principles, Module M1-7
 Energieeffizienz von Gebäuden - Bestimmung und
Berichterstattung von Primärenergiefaktoren (PEF)
und CO2-Emissionsfaktoren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 371.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17423:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17423:2019
prEN 17423:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 7
4 Symbols, subscripts and abbreviations. 9
4.1 Symbols . 9
4.2 Subscripts . 10
4.3 Abbreviations . 11
5 General description of the methods and choices . 11
5.1 Basic principles of the assessment methods .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.