Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:2019)

This document describes a pneumatic pressure method for the determination of bursting strength and bursting distension of textile fabrics.
NOTE    ISO 13938-1 describes a method using hydraulic pressure.
The method is applicable to knitted, woven, nonwoven and laminated fabrics. It can be suitable for fabrics produced by other techniques. The test is suitable for test specimens in the conditioned or wet state.
From the available data there appears to be no significant difference in the bursting strength results achieved using hydraulic or pneumatic burst testers, for pressures up to 800 kPa. This pressure range covers the majority of performance levels expected of general apparel. For speciality textiles requiring high bursting pressures, the hydraulic apparatus is more suitable.

Textilien - Bersteigenschaften von textilen Flächengebilden - Teil 2: Pneumatisches Verfahren zur Bestimmung von Berstdruck und Berstwölbung (ISO 13938-2:2019)

Dieses Dokument beschreibt ein pneumatisches Verfahren zur Bestimmung von Berstdruck und Berstwölbung textiler Flächengebilde.
ANMERKUNG   ISO 13938 1 beschreibt ein Prüfverfahren, bei dem hydraulischer Druck verwendet wird.
Das Prüfverfahren ist anzuwenden für Maschenwaren, Webwaren, Vliesstoffe und Laminate. Es kann für textile Flächengebilde geeignet sein, die mit anderen Verfahren hergestellt sind. Die Prüfung ist sowohl für an das Normalklima angeglichene Messproben als auch für Messproben im nassen Zustand geeignet.
Wie aus den zur Verfügung stehenden Daten hervorgeht, scheint es bei mit hydraulischen und pneumatischen Berstdruckprüfgeräten gewonnenen Ergebnissen von Drücken bis zu 800 kPa keinen wesentlichen Unterschied zu geben. Dieser Druckbereich umfasst die Mehrzahl der für Bekleidung zu erwartenden Kennwerte. Für spezielle Textilien, für die hohe Berstdrücke gefordert sind, ist das hydraulische Prüfgerät das geeignetere.

Textiles - Propriétés de résistance à l'éclatement des étoffes - Partie 2: Méthode pneumatique pour la détermination de la résistance et de la déformation à l'éclatement (ISO 13938-2:2019)

Le présent document décrit une méthode pneumatique de détermination de la résistance et de la déformation à l'éclatement des étoffes.
NOTE       L'ISO 13938-1 décrit une méthode utilisant une pression hydraulique.
La méthode s'applique aux étoffes tricotées, tissées, non tissées et laminées. Elle peut convenir aux étoffes produites par d'autres techniques. L'essai peut être effectué soit sur des éprouvettes conditionnées, soit sur des éprouvettes humides.
D'après les informations actuellement disponibles, il n'apparaît aucune différence significative, pour les pressions allant jusqu'à 800 kPa, entre les résultats obtenus avec des éclatomètres hydrauliques et ceux obtenus avec des appareillages pneumatiques. Cette gamme de pressions couvre la majorité des niveaux de performance prévus pour les étoffes courantes d'habillement. Pour les textiles spécifiques nécessitant des pressions d'éclatement élevées, l'appareillage hydraulique est plus approprié.

Tekstilije - Razpočne lastnosti ploskovnih tekstilij - 2. del: Ugotavljanje razpočne trdnosti in višine izbočenja z metodo zračnega tlaka (ISO 13938-2:2019)

Ta standard opisuje določanje razpočne trdnosti in višine izbočenja pri tekstilnih tkaninah z metodo zračnega tlaka. Metoda je uporabna za pletene, tkane, netkane in laminirane tkanine. Primerna je za tudi za tekstilije, ki so proizvedene z drugimi metodami. Preskus je primeren za preskusne vzorce v kondicioniranem ali mokrem stanju. Iz razpoložljivih podatkov je videti, da pri rezultatih razpočne trdnosti, doseženih s hidravličnimi ali pnevmatskimi preizkuševalci pri tlakih do 800 kPa, ni pomembne razlike. Ta razpon tlaka zajema večino lastnosti, pričakovanih pri običajnih oblačilih.

General Information

Status
Published
Publication Date
10-Dec-2019
Withdrawal Date
29-Jun-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
11-Dec-2019
Completion Date
11-Dec-2019

Relations

Buy Standard

Standard
EN ISO 13938-2:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 13938-2:2019
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 13938-2:2020
01-februar-2020
Nadomešča:
SIST EN ISO 13938-2:1999
Tekstilije - Razpočne lastnosti ploskovnih tekstilij - 2. del: Ugotavljanje razpočne
trdnosti in višine izbočenja z metodo zračnega tlaka (ISO 13938-2:2019)
Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of
bursting strength and bursting distension (ISO 13938-2:2019)
Textilien - Bersteigenschaften von textilen Flächengebilden - Teil 2: Pneumatisches
Verfahren zur Bestimmung von Berstdruck und Berstwölbung (ISO 13938-2:2019)
Textiles - Propriétés de résistance à l'éclatement des étoffes - Partie 2: Méthode
pneumatique pour la détermination de la résistance et de la déformation à l'éclatement
(ISO 13938-2:2019)
Ta slovenski standard je istoveten z: EN ISO 13938-2:2019
ICS:
59.080.30 Tkanine Textile fabrics
SIST EN ISO 13938-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 13938-2:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 13938-2:2020


EN ISO 13938-2
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2019
EUROPÄISCHE NORM
ICS 59.080.30 Supersedes EN ISO 13938-2:1999
English Version

Textiles - Bursting properties of fabrics - Part 2: Pneumatic
method for determination of bursting strength and
bursting distension (ISO 13938-2:2019)
Textiles - Propriétés de résistance à l'éclatement des Textilien - Bersteigenschaften von textilen
étoffes - Partie 2: Méthode pneumatique pour la Flächengebilden - Teil 2: Pneumatisches Verfahren zur
détermination de la résistance et de la déformation à Bestimmung von Berstdruck und Berstwölbung (ISO
l'éclatement (ISO 13938-2:2019) 13938-2:2019)
This European Standard was approved by CEN on 17 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13938-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 13938-2:2020
EN ISO 13938-2:2019 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 13938-2:2020
EN ISO 13938-2:2019 (E)
European foreword
This document (EN ISO 13938-2:2019) has been prepared by Technical Committee ISO/TC 38
"Textiles" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2020, and conflicting national standards shall be
withdrawn at the latest by June 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13938-2:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
...

SLOVENSKI STANDARD
oSIST prEN ISO 13938-2:2019
01-september-2019
Tekstilije - Razpočne lastnosti ploskovnih tekstilij - 2. del: Ugotavljanje razpočne
trdnosti in višine izbočenja z metodo zračnega tlaka (ISO/FDIS 13938-2:2019)
Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of
bursting strength and bursting distension (ISO/FDIS 13938-2:2019)
Textilien - Bersteigenschaften von textilen Flächengebilden - Teil 2: Pneumatisches
Verfahren zur Bestimmung von Berstdruck und Berstwölbung (ISO/FDIS 13938-2:2019)
Textiles - Propriétés de résistance à l'éclatement des étoffes - Partie 2: Méthode
pneumatique pour la détermination de la résistance et de la déformation à l'éclatement
(ISO/FDIS 13938-2:2019)
Ta slovenski standard je istoveten z: prEN ISO 13938-2
ICS:
59.080.30 Tkanine Textile fabrics
oSIST prEN ISO 13938-2:2019 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 13938-2:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 13938-2:2019
FINAL
INTERNATIONAL ISO/FDIS
DRAFT
STANDARD 13938-2
ISO/TC 38/SC 24
Textiles — Bursting properties of
Secretariat: AFNOR
fabrics —
Voting begins on:
2019-07-24
Part 2:
Voting terminates on:
Pneumatic method for determination
2019-10-16
of bursting strength and bursting
distension
Textiles — Propriétés de résistance à l'éclatement des étoffes —
Partie 2: Méthode pneumatique pour la détermination de la
résistance et de la déformation à l'éclatement
ISO/CEN PARALLEL PROCESSING
RECIPIENTS OF THIS DRAFT ARE INVITED TO
SUBMIT, WITH THEIR COMMENTS, NOTIFICATION
OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPOR TING
DOCUMENTATION.
IN ADDITION TO THEIR EVALUATION AS
Reference number
BEING ACCEPTABLE FOR INDUSTRIAL, TECHNO-
ISO/FDIS 13938-2:2019(E)
LOGICAL, COMMERCIAL AND USER PURPOSES,
DRAFT INTERNATIONAL STANDARDS MAY ON
OCCASION HAVE TO BE CONSIDERED IN THE
LIGHT OF THEIR POTENTIAL TO BECOME STAN-
DARDS TO WHICH REFERENCE MAY BE MADE IN
©
NATIONAL REGULATIONS. ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 13938-2:2019
ISO/FDIS 13938-2:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 13938-2:2019
ISO/FDIS 13938-2:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Sampling . 2
6 Apparatus . 2
6.1 Bursting tester . 2
7 Atmospheres for conditioning and testing .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.