Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted onto the wheel, dimensions and quality requirements

This document specifies requirements for the design and dimensions of the brake disc.
This document applies to brake discs mounted onto the wheel, including the wheel web or wheel hub of railway rolling stock.
This document applies to discs having one or more disc brake rings, each having two axially separated friction faces.

Bahnanwendungen - Bremsscheiben für Schienenfahrzeuge - Teil 2: Bremsscheiben, die an einem Rad befestigt werden, Abmessungen und Qualitätsanforderungen

Dieses Dokument legt die Anforderungen an die Konstruktion und Abmessungen der Bremsscheibe fest.
Dieses Dokument gilt für Bremsscheiben, die auf dem Rad einschließlich dem Radsteg oder der Radnabe von Schienenfahrzeugen befestigt werden.
Dieses Dokument gilt für Bremsscheiben, die einen oder mehrere Bremsringe mit je zwei axial getrennten Reibflächen aufweisen.

Applications ferroviaires - Disques de frein pour matériel roulant ferroviaire - Partie 2 : Disques de frein montés sur la roue, dimensions et exigences de qualité

Le présent document spécifie les exigences à respecter pour la conception et les dimensions de disques de frein.
Le présent document s’applique aux disques de frein montés sur roue, que ce soit sur la toile ou le moyeu de la roue d’un matériel roulant ferroviaire.
Le présent document s’applique aux disques ayant plusieurs couronnes de disque de frein, chaque couronne ayant une surface de friction.

Železniške naprave - Kolutne zavore za železniška vozila - 2. del: Kolutne zavore, nameščene na kolo, mere in zahteve za kakovost

Ta osnutek evropskega standarda določa zahteve za načrtovanje in mere kolutnih zavor (diskov).
Ta osnutek evropskega standarda se uporablja za kolutne zavore, nameščene na kolo (vključno s ploščo kolesa ali pestom), pri tirnih vozilih.
Za vsako posamezno tako opremljeno enoto se lahko uvede en ali več obročev za kolutne zavore, pri čemer ima vsak eno čelno torno ploskev.
Pogodbene stranke se morajo dogovoriti o morebitnem odstopanju od tega osnutka standarda.

General Information

Status
Published
Publication Date
05-Mar-2019
Withdrawal Date
29-Sep-2019
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
06-Mar-2019
Due Date
03-Apr-2019
Completion Date
06-Mar-2019

Relations

Buy Standard

Standard
EN 14535-2:2019
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 14535-2:2016
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14535-2:2019
01-maj-2019
1DGRPHãþD
SIST EN 14535-2:2011
äHOH]QLãNHQDSUDYH.ROXWQH]DYRUH]DåHOH]QLãNDYR]LODGHO.ROXWQH]DYRUH
QDPHãþHQHQDNRORPHUHLQ]DKWHYH]DNDNRYRVW
Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted
onto the wheel, dimensions and quality requirements
Bahnanwendungen - Bremsscheiben für Schienenfahrzeuge - Teil 2: Bremsscheiben, die
an einem Rad befestigt werden, Abmessungen und Qualitätsanforderungen
Applications ferroviaires - Disques de frein pour matériel roulant ferroviaire - Partie 2 :
Disques de frein montés sur la roue, dimensions et exigences de qualité
Ta slovenski standard je istoveten z: EN 14535-2:2019
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 14535-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14535-2:2019

---------------------- Page: 2 ----------------------

SIST EN 14535-2:2019


EN 14535-2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2019
EUROPÄISCHE NORM
ICS 45.060.01 Supersedes EN 14535-2:2011
English Version

Railway applications - Brake discs for railway rolling stock
- Part 2: Brake discs mounted onto the wheel, dimensions
and quality requirements
Applications ferroviaires - Disques de frein pour Bahnanwendungen - Bremsscheiben für
matériel roulant ferroviaire - Partie 2 : Disques de frein Schienenfahrzeuge - Teil 2: Bremsscheiben, die an
montés sur la roue, dimensions et exigences de qualité einem Rad befestigt werden, Abmessungen und
Qualitätsanforderungen
This European Standard was approved by CEN on 14 October 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14535-2:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14535-2:2019
EN 14535-2:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 6
5 Requirements . 7
5.1 General . 7
5.2 Materials, design and manufacture . 7
5.3 Dimensions .
...

SLOVENSKI STANDARD
oSIST prEN 14535-2:2016
01-december-2016
äHOH]QLãNHQDSUDYH.ROXWQH]DYRUH]DåHOH]QLãNDYR]LODGHO.ROXWQH]DYRUH
QDPHãþHQHQDNRORPHUHLQ]DKWHYH]DNDNRYRVW
Railway applications - Brake discs for railway rolling stock - Part 2: Brake discs mounted
onto the wheel, dimensions and quality requirements
Bahnanwendungen - Bremsscheiben für Schienenfahrzeuge - Teil 2: Bremsscheiben, die
an einem Rad befestigt werden, Abmessungen und Qualitätsanforderungen
Applications ferroviaires - Disques de frein pour matériel roulant ferroviaire - Partie 2 :
Disques de frein montés sur la roue, dimensions et exigences de qualité
Ta slovenski standard je istoveten z: prEN 14535-2
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
oSIST prEN 14535-2:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14535-2:2016

---------------------- Page: 2 ----------------------
oSIST prEN 14535-2:2016


DRAFT
EUROPEAN STANDARD
prEN 14535-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

October 2016
ICS 45.040 Will supersede EN 14535-2:2011
English Version

Railway applications - Brake discs for railway rolling stock
- Part 2: Brake discs mounted onto the wheel, dimensions
and quality requirements
Applications ferroviaires - Disques de frein pour Bahnanwendungen - Bremsscheiben für
matériel roulant ferroviaire - Partie 2 : Disques de frein Schienenfahrzeuge - Teil 2: Bremsscheiben, die an
montés sur la roue, dimensions et exigences de qualité einem Rad befestigt werden, Abmessungen und
Qualitätsanforderungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14535-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14535-2:2016
prEN 14535-2:2016 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Symbols and abbreviations . 8
5 Requirements . 8
5.1 General .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.