EN 4840-001:2018

Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification

This European standard specifies the required characteristics, test methods, qualification and production
routine testing of heat shrinkable moulded shapes.

Luft- und Raumfahrt - Wärmeschrumpfende Formteile - Teil 001: Technische Lieferbedingungen

Série aérospatiale - Manchons thermorétractables - Partie 001 : Spécification technique

Aeronavtika - Toplotno skrčljive ulite forme - 001. del: Tehnična specifikacija

Ta evropski standard določa zahtevane lastnosti, preskusne metode, kvalifikacijo in rutinsko preskušanje proizvodnje toplotno skrčljivih ulitih form.

General Information

• Status: Published
• Publication Date: 28-Aug-2018
• Withdrawal Date: 27-Feb-2019
• ICS: 29.035.20 - Plastics and rubber insulating materials
• ICS: 29.120.99 - Other electrical accessories
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2/S 8 - Installation Technologies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 29-Aug-2018
• Completion Date: 29-Aug-2018
• Ref Project: SIST EN 4840-001:2018 - Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4840-001:2018
01-november-2018
$HURQDYWLND7RSORWQRVNUþOMLYHXOLWHIRUPHGHO7HKQLþQDVSHFLILNDFLMD
Aerospace series - Heat shrinkable moulded shapes - Part 001: Technical specification
Luft- und Raumfahrt - Wärmeschrumpfende Formteile - Teil 001: Technische
Spezifikation
Série aérospatiale - Manchons thermorétractables - Partie 001 : Spécification technique
Ta slovenski standard je istoveten z: EN 4840-001:2018
ICS:
49.025.40 Guma in polimerni materiali Rubber and plastics
SIST EN 4840-001:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4840-001:2018

---------------------- Page: 2 ----------------------

SIST EN 4840-001:2018


EN 4840-001
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2018
EUROPÄISCHE NORM
ICS 29.035.20; 49.060
English Version

Aerospace series - Heat shrinkable moulded shapes - Part
001: Technical specification
Série aérospatiale - Manchons thermorétractables - Luft- und Raumfahrt - Wärmeschrumpfende Formteile
Partie 001 : Spécification technique - Teil 001: Technische Lieferbedingungen
This European Standard was approved by CEN on 18 January 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4840-001:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4840-001:2018
EN 4840-001:2018 (E)
Contents Page
European foreword . 3
Scope . 4
Normative references . 4
Definitions and symbols . 4
Materials and characteristics . 4
Required properties . 5
Test methods . 5
Quality assurance . 7
Labelling and packaging . 9
Annex A (Informative) Storage recommendations . 10

2

---------------------- Page: 4 ----------------------

SIST EN 4840-001:2018
EN 4840-001:2018 (E)
European foreword
This document (EN 4840-001:2018) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the sta
...