Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2018)

This document covers the different types of weaving and knitting machines defined in ISO 5247 (all parts)[2] and ISO 7839[3], respectively.
It is applicable to:
       full-width weaving machines with weft insertion by:
       shuttles;
       rigid, telescopic or flexible rapiers;
       projectiles;
       hydraulic (waterjet) or by pneumatic (airjet) nozzle;
       narrow fabric weaving machines with weft insertion by shuttles or needles;
       jacquard machines;
       knitting machinery including:
       circular knitting;
       flat bed knitting;
       warp knitting;
       raschel;
       cotton (flat weft weaving);
       other fabric manufacturing machines e.g.:
       multi-phase weaving machines;
       circular weaving machines;
       stitch bonding machines.
NOTE       Because of the high requirements on measurement conditions, grade 1 methods are normally not feasible for textile machinery.

Textilmaschinen - Geräuschmessverfahren - Teil 6: Maschinen zur Hertsellung textiler Flächengebilde (ISO 9902-6:2018)

Dieses Dokument behandelt die verschiedenen Arten von Web- und Strickmaschinen, die in ISO 5247 (alle Teile) [2] bzw. ISO 7839 [3] entsprechend festgelegt sind.
Es gilt für:
- Breitwebmaschinen mit Schusseintrag durch:
- Schützen;
- starre, teleskopartige oder flexible Greifer;
- Projektile;
- hydraulische (Wasserdüsen) oder pneumatische (Luftdüsen) Düsen;
- Bandwebmaschinen mit Schusseintrag durch Schiffchen oder Nadeln;
- Jacquardeinrichtungen;
- Strick- und Wirkmaschinen einschließlich:
- Rundstrickmaschinen;
- Flachstrickmaschinen;
- Kettenwirkmaschinen;
- Raschelmaschinen;
- Cottonmaschinen (Flachkulierwirkmaschinen);
- andere Webmaschinen, z. B.:
- Mehrphasenwebmaschinen;
- Rundwebmaschinen;
- Nähwirkmaschinen.
ANMERKUNG   Aufgrund der hohen Anforderungen an die Bedingungen der Messung sind Verfahren der Genauig¬keitsklasse 1 für Textilmaschinen üblicherweise nicht anwendbar.

Matériel pour l'industrie textile - Code d'essai acoustique - Partie 6: Machines de production des étoffes (ISO 9902-6:2018)

Le présent document couvre les différents types de machines de tissage et de tricotage définies, respectivement, dans l'ISO 5247 (toutes les parties)[2] et l'ISO 7839[3].
Il est applicable :
-      aux machines à tisser pleine largeur à insertion de la trame :
-     à lances ;
-     rigides, télescopiques ou flexibles ;
-     à projectiles ;
-     par jet hydraulique (jet d'eau) ou par jet pneumatique (jet d'air) ;
-      aux machines à tisser les rubans à insertion de la trame par navettes ou par aiguilles ;
-      aux machines Jacquard ;
-      aux machines à tricoter :
-     circulaires ;
-     rectilignes,
-     à mailles jetées ;
-     Raschel ;
-     coton (machines à tricoter rectilignes à maille) ;
-      à d'autres machines de fabrication de tissus, par exemple :
-     machines à tisser multiphasées ;
-     machines à tisser circulaires ;
-     machines de liage par fil.

Tekstilni stroji - Preskusni postopki za merjenje hrupa - 6. del: Stroji za izdelavo tkanin (ISO 9902-6:2018)

General Information

Status
Published
Publication Date
12-Jan-2021
Withdrawal Date
30-Jul-2021
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
13-Jan-2021
Completion Date
13-Jan-2021

Relations

Buy Standard

Standard
EN ISO 9902-6:2021
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 9902-6:2018
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9902-6:2021
01-april-2021
Nadomešča:
SIST EN ISO 9902-6:2002
SIST EN ISO 9902-6:2002/A1:2009
SIST EN ISO 9902-6:2002/A2:2014
Tekstilni stroji - Preskusni postopki za merjenje hrupa - 6. del: Stroji za izdelavo
tkanin (ISO 9902-6:2018)
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-
6:2018)
Textilmaschinen - Geräuschmessverfahren - Teil 6: Maschinen zur Herstellung textiler
Flächengebilde (ISO 9902-6:2018)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 6: Machines de
production des étoffes (ISO 9902-6:2018)
Ta slovenski standard je istoveten z: EN ISO 9902-6:2021
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.30 Statve. Tkalni stroji Looms. Weaving machines
SIST EN ISO 9902-6:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 9902-6:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 9902-6:2021


EN ISO 9902-6
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2021
EUROPÄISCHE NORM
ICS 17.140.20; 59.120.30 Supersedes EN ISO 9902-6:2001
English Version

Textile machinery - Noise test code - Part 6: Fabric
manufacturing machinery (ISO 9902-6:2018)
Matériel pour l'industrie textile - Code d'essai Textilmaschinen - Geräuschmessverfahren - Teil 6:
acoustique - Partie 6: Machines de production des Maschinen zur Hertsellung textiler Flächengebilde (ISO
étoffes (ISO 9902-6:2018) 9902-6:2018)
This European Standard was approved by CEN on 23 December 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-6:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 9902-6:2021
EN ISO 9902-6:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 9902-6:2021
EN ISO 9902-6:2021 (E)
European foreword
This document (EN ISO 9902-6:2021) has been prepared by Technical Committee ISO/TC 72 "Textile
machinery and accessories" in collaboration with Technical Committee CEN/TC 214 “Textile machinery
and accessories” the secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2021, and conflicting national standards shall be
withdrawn at the latest by July 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9902-6:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 9902-6:2018 has been approved by CEN as EN ISO 9902-6:2021 without any
modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 990
...

SLOVENSKI STANDARD
oSIST prEN ISO 9902-6:2018
01-april-2018
Tekstilni stroji - Preskusni postopki za merjenje hrupa - 6. del: Stroji za izdelavo
tkanin (ISO/DIS 9902-6:2018)
Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO/DIS
9902-6:2018)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 6: Machines de
production des étoffes (ISO/DIS 9902-6:2018)
Ta slovenski standard je istoveten z: prEN ISO 9902-6
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.30 Statve. Tkalni stroji Looms. Weaving machines
oSIST prEN ISO 9902-6:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 9902-6:2018

---------------------- Page: 2 ----------------------
oSIST prEN ISO 9902-6:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 9902-6
ISO/TC 72/SC 8 Secretariat: DIN
Voting begins on: Voting terminates on:
2018-01-15 2018-04-09
Textile machinery — Noise test code —
Part 6:
Fabric manufacturing machinery
Matériel pour l'industrie textile — Code d'essai acoustique —
Partie 6: Machines de production des étoffes
ICS: 17.140.20; 59.120.30
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 9902-6:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018

---------------------- Page: 3 ----------------------
oSIST prEN ISO 9902-6:2018
ISO/DIS 9902-6:2018(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2018, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2018 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 9902-6:2018
ISO/DIS 9902-6:2018(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Defining the test object . 2
5 Sound power level determination . 2
5.1 International Standards required for basic measurements . 2
5.1.1 General. 2
5.1.2 Determination of sound power level by measuring sound intensity . 2
5.1.3 Determination of sound power level using emission sound pressure levels
on a measurement surface . 3
5.2 Very large machines .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.