EN ISO 17034:2016
(Main)General requirements for the competence of reference material producers (ISO 17034:2016)
General requirements for the competence of reference material producers (ISO 17034:2016)
ISO 17034:2016 specifies general requirements for the competence and consistent operation of reference material producers.
ISO 17034:2016 sets out the requirements in accordance with which reference materials are produced. It is intended to be used as part of the general quality assurance procedures of the reference material producer.
ISO 17034:2016 covers the production of all reference materials, including certified reference materials.
Allgemeine Anforderungen an die Kompetenz von Referenzmaterialherstellern
Diese Internationale Norm legt allgemeine Anforderungen an die Kompetenz und die konsistente Arbeitsweise von Referenzmaterialherstellern fest.
Diese Internationale Norm legt die Anforderungen fest, nach denen Referenzmaterialien hergestellt werden. Sie ist dazu vorgesehen, als Teil der allgemeinen Qualitätssicherungsverfahren der Referenzmaterial¬hersteller angewendet zu werden.
Diese Internationale Norm deckt die Herstellung sämtlicher Referenzmaterialien, einschließlich zertifizierter Referenzmaterialien ab.
ANMERKUNG Referenzmaterialhersteller, Regulierungsbehörden, Organisationen und Programme, die eine Begut-achtung unter Gleichrangigen anwenden sowie Akkreditierungsstellen und andere können diese Internationale Norm ebenfalls zur Bestätigung oder Anerkennung der Kompetenz von Referenzmaterialherstellern einsetzen.
Exigences générales pour la compétence des producteurs de matériaux de référence (ISO 17034:2016)
ISO 17034:2016 spécifie les exigences générales pour la compétence et le fonctionnement cohérent des producteurs de matériaux de référence.
ISO 17034:2016 spécifie les exigences par rapport auxquelles les matériaux de référence sont produits. Elle est destinée à être utilisée dans le cadre des procédures générales d'assurance qualité d'un producteur de matériaux de référence.
ISO 17034:2016 couvre la production de tous les matériaux de référence, y compris les matériaux de référence certifiés.
Ugotavljanje skladnosti - Splošne zahteve za usposobljenost proizvajalcev referenčnih materialov (ISO 17034:2016)
Ta mednarodni standard določa splošne zahteve, v skladu s katerimi mora proizvajalec referenčnih materialov dokazano delovati, da je priznan kot usposobljen za proizvajanje referenčnih materialov. Ta mednarodni standard uporabljajo proizvajalci referenčnih materialov pri razvoju in izvajanju svojega sistema za upravljanje postopkov v zvezi z zagotavljanjem kakovosti ter upravnih in tehničnih postopkov. Stranke ter zakonodajni in akreditacijski organi, ki uporabljajo referenčni material, lahko ta standard uporabljajo tudi pri potrjevanju in priznavanju usposobljenosti proizvajalcev referenčnega materiala. Ta mednarodni standard določa zahteve, v skladu s katerimi je treba proizvajati referenčne materiale. Namenjen je za uporabo kot del splošnih postopkov zagotavljanja kakovosti (QA) proizvajalca referenčnega materiala. Ta mednarodni standard zajema proizvodnjo vseh referenčnih materialov. Proizvodne zahteve za certificirane referenčne materiale so strožje kot za druge referenčne materiale.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17034:2017
01-februar-2017
8JRWDYOMDQMHVNODGQRVWL6SORãQH]DKWHYH]DXVSRVREOMHQRVWSURL]YDMDOFHY
UHIHUHQþQLKPDWHULDORY ,62
Conformity assessment - General requirements for the competence of reference material
producers (ISO 17034:2016)
Konformitätsbewertung - Allgemeine Anforderungen an die Kompetenz von
Referenzmaterialherstellern (ISO 17034:2016)
Exigences générales pour la compétence des producteurs de matériaux de référence
(ISO 17034:2016)
Ta slovenski standard je istoveten z: EN ISO 17034:2016
ICS:
03.120.20 Certificiranje proizvodov in Product and company
podjetij. Ugotavljanje certification. Conformity
skladnosti assessment
SIST EN ISO 17034:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17034:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 17034:2017
EUROPEAN STANDARD
EN ISO 17034
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2016
ICS 03.120.20
English version
General requirements for the competence of reference
material producers (ISO 17034:2016)
Exigences générales pour la compétence des Konformitätsbewertung - Allgemeine Anforderungen
producteurs de matériaux de référence (ISO an die Kompetenz von Referenzmaterialherstellern
17034:2016) (ISO 17034:2016)
This European Standard was approved by CEN on 26 October 2016.
CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
CEN-CENELEC Management Centre:
Avenue Marnix 17, B-1000 Brussels
© 2016 CEN/CENELEC All rights of exploitation in any form and by any means Ref. No. EN ISO 17034:2016 E
reserved worldwide for CEN national Members and for
CENELEC Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17034:2017
EN ISO 17034:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17034:2017
EN ISO 17034:2016 (E)
European foreword
This document (EN ISO 17034:2016) has been prepared by Technical Committee ISO/CASCO
"Committee on conformity assessment" in collaboration with Technical Committee CEN/CLC/TC 1
“Criteria for conformity assessment bodies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be
withdrawn at the latest by May 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 17034:2016 has been approved by CEN as EN ISO 17034:2016 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17034:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 17034:2017
INTERNATIONAL ISO
STANDARD 17034
First edition
2016-11-01
General requirements
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.