EN ISO 3175-1:2018

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2017)

ISO 3175-1:2017 specifies a method for assessing textile articles which have been tested according to ISO 3175‑2 to ISO 3175‑4.
Fabric and garment properties, which can change on drycleaning or wetcleaning and finishing, are identified and methods for assessing change using existing International Standards are given as appropriate. Other properties which are also important, but for which there are no International Standards providing methods of assessment, are indicated in Annex A (normative), together with advice on how to proceed on their assessment.

Textilien - Professionelle Pflege, Chemischreinigung und Nassreinigung von textilen Flächengebilden und Kleidungsstücken - Teil 1: Leistungsbewertung nach Reinigung und Nachbehandlung (ISO 3175-1:2017)

Dieser Teil von ISO 3175 legt ein Prüfverfahren zur Beurteilung von textilen Waren, die nach ISO 3175 2 bis -4 geprüft wurden, fest.
Eigenschaften von textilen Flächengebilden und Kleidungsstücken, die sich beim Chemischreinigen oder Nassreinigen sowie bei Nachbearbeitungen ändern können, werden bestimmt und zur Beurteilung der Veränderungen werden geeignete Verfahren nach vorhandenen Internationalen Normen angegeben. Weitere ebenso wichtige Eigenschaften, für deren Beurteilung jedoch keine Verfahren nach Internationalen Normen zur Verfügung stehen, sind zusammen mit einem Hinweis, wie bei deren Beurteilung vorzugehen ist, im Anhang A aufgeführt.

Textiles - Entretien professionnel, nettoyage à sec et nettoyage à l'eau des étoffes et des vêtements - Partie 1: Évaluation de la résistance après le nettoyage et la finition (ISO 3175-1:2017)

L'ISO 3175-1:2017 spécifie une méthode pour évaluer les articles textiles ayant été soumis à essai conformément aux normes ISO 3175‑2 à ISO 3175‑4.
Les propriétés des étoffes et des vêtements qui peuvent changer en raison des traitements de nettoyage à sec ou à l'eau et de finition sont identifiées et les méthodes d'évaluation de ces modifications, à l'aide des Normes internationales existantes sont indiquées, selon les cas. D'autres propriétés, tout aussi importantes, mais pour lesquelles il n'existe pas de Normes internationales fournissant des méthodes d'évaluation, sont données dans l'Annexe A, ainsi que des indications pour procéder à leur évaluation.

Tekstilije - Profesionalna nega ter kemično in mokro čiščenje tekstilnih izdelkov in oblačil - 1. del: Ocenjevanje sposobnosti čiščenja in plemenitenja (ISO 3175-1:2017)

Ta dokument določa metodo za ocenjevanje tekstilnih izdelkov, ki so bili preskušeni v skladu s standardi od ISO 3175-2 do ISO 3175-4.
Predstavljene so lastnosti tekstilij in oblačil, ki se lahko spremenijo pri kemičnem ali mokrem čiščenju in naknadni obdelavi, ter podane ustrezne metode za ocenjevanje sprememb z uporabo obstoječih mednarodnih standardov. Druge lastnosti, ki so ravno tako pomembne, vendar mednarodni standardi zanje ne določajo metod ocenjevanja, so podane v dodatku A (normativni), skupaj z navodili za njihovo ocenjevanje.

General Information

• Status: Published
• Publication Date: 23-Jan-2018
• Withdrawal Date: 30-Jul-2018
• ICS: 59.080.01 - Textiles in general
• ICS: 59.080.30 - Textile fabrics
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248 - Textiles and textile products
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 24-Jan-2018
• Completion Date: 24-Jan-2018
• Ref Project: SIST EN ISO 3175-1:2018 - Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2017)

Relations

• Replaces: EN ISO 3175-1:2010 - Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 1: Assessment of performance after cleaning and finishing (ISO 3175-1:2010)
• Effective Date: 31-Jan-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3175-1:2018
01-april-2018
1DGRPHãþD
SIST EN ISO 3175-1:2013
7HNVWLOLMH3URIHVLRQDOQDQHJDWHUNHPLþQRLQPRNURþLãþHQMHWHNVWLOQLKL]GHONRYLQ
REODþLOGHO2FHQMHYDQMHVSRVREQRVWLþLãþHQMDLQSOHPHQLWHQMD,62

Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part
1: Assessment of performance after cleaning and finishing (ISO 3175-1:2017)
Textilien - Fachgerechte Pflege, Chemischreinigung und Nassreinigung von textilen
Flächengebilden und Kleidungsstücken - Teil 1: Leistungsbewertung nach Reinigung und
Nachbearbeitung (ISO 3175-1:2017)
Textiles - Entretien professionnel, nettoyage à sec et nettoyage à l'eau des étoffes et des
vêtements - Partie 1: Évaluation de la résistance après le nettoyage et la finition (ISO
3175-1:2017)
Ta slovenski standard je istoveten z: EN ISO 3175-1:2018
ICS:
59.080.01 Tekstilije na splošno Textiles in general
SIST EN ISO 3175-1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3175-1:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 3175-1:2018


EN ISO 3175-1
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2018
EUROPÄISCHE NORM
ICS 59.080.01 Supersedes EN ISO 3175-1:2010
English Version

Textiles - Professional care, drycleaning and wetcleaning
of fabrics and garments - Part 1: Assessment of
performance after cleaning and finishing (ISO 3175-
1:2017)
Textiles - Entretien professionnel, nettoyage à sec et Textilien - Fachgerechte Pflege, Chemischreinigung
nettoyage à l'eau des étoffes et des vêtements - Partie und Nassreinigung von textilen Flächengebilden und
1: Évaluation de la résistance après le nettoyage et la Kleidungsstücken - Teil 1: Leistungsbewertung nach
finition (ISO 3175-1:2017) Reinigung und Nachbearbeitung (ISO 3175-1:2017)
This European Standard was approved by CEN on 10 December 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3175-1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 3175-1:2018
EN ISO 3175-1:2018 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 3175-1:2018
EN ISO 3175-1:2018 (E)
European foreword
This document (EN ISO 3175-1:2018) has been prepared by Technical Committee ISO/TC 38 “Textiles”
in collaboration with Technical Committee CEN/TC 248 “Textiles and textile products” the secretariat of
which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2018, and conflicting national standards shall be
withdrawn at the latest by July 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3175-1:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal
...