EN ISO 29461-2:2022
(Main)Air intake filter systems for rotary machinery - Test methods - Part 2: Filter element endurance test in fog and mist environments (ISO 29461-2:2022)
Air intake filter systems for rotary machinery - Test methods - Part 2: Filter element endurance test in fog and mist environments (ISO 29461-2:2022)
This document specifies general test requirements, the test rig and equipment, the test materials and the test procedure and report for determining water endurance performance of air filter elements used in air intake filter systems for rotary machinery such as stationary gas turbines, compressors and other stationary internal combustion engines.
The test evaluates water endurance performance of air filter elements under laboratory conditions. The performance results obtained in accordance with this document cannot be quantitatively applied (by themselves) to predict performance in service with regard to water endurance and lifetime.
Ansaugfiltersysteme von Rotationsmaschinen - Prüfverfahren - Teil 2: Dauertest für Filterelemente in Nebel- und Nebelumgebungen (ISO 29461-2:2022)
Dieses Dokument legt die allgemeinen Prüfanforderungen, den Prüfstand und die Prüfausrüstung, die Prüfmaterialien, das Prüfverfahren und den Prüfbericht für die Bestimmung des Wasserbeständigkeitsverhaltens von Luftfilterelementen fest, die in Lufteinlassfiltersystemen für Rotationsmaschinen wie stationäre Gasturbinen, Kompressoren und andere stationäre Verbrennungsmotoren verwendet werden.
Die Prüfung bewertet das Wasserbeständigkeitsverhalten von Luftfilterelementen unter Laborbedingungen. Die nach diesem Dokument für die Leistung ermittelten Ergebnisse können nicht unmittelbar zur quantitativen Vorhersage der Leistung bezogen auf Wasserbeständigkeit und Lebensdauer für den jeweiligen Anwendungsfall des Filters verwendet werden.
Systèmes de filtration d'air d'admission pour machines tournantes - Méthodes d'essai - Partie 2: Essai d'endurance d'élément filtrant en brouillard et environnement brumeux (ISO 29461-2:2022)
Le présent document spécifie les exigences générales d'essai, le banc et les équipements d'essai, les produits pour l'essai, le mode opératoire d'essai et le rapport pour la détermination des performances de résistance à l'eau des éléments filtrants utilisés dans les systèmes de filtration d'air d'admission des machines tournantes comme les turbines à gaz stationnaires, les compresseurs et autres moteurs stationnaires à combustion interne.
L'essai évalue la performance de résistance à l'eau des éléments filtrants dans des conditions de laboratoire. Les données de performances obtenues conformément au présent document ne peuvent pas être utilisées quantitativement (par elles-mêmes) pour prédire les performances en service en termes de résistance à l'eau et de durée de vie.
Zračni filtrski sistemi rotacijskih strojev - Preskusne metode - 2. del: Preskus vzdržljivosti filtrskih elementov v okolju z meglo in sparino (ISO 29461-2:2022)
Ta standard določa splošne zahteve, preskuševalno opremo, kvalifikacijo, preskusne materiale, preskusni postopek in poročilo za ugotavljanje vzdržljivosti delovanja elementov v zračnih filtrskih sistemih rotacijskih strojev, kot so nepremične plinske turbine, kompresorji in drugi nepremični motorji z notranjim izgorevanjem.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 29461-2:2022
01-november-2022
Zračni filtrski sistemi rotacijskih strojev - Preskusne metode - 2. del: Preskus
vzdržljivosti filtrskih elementov v okolju z meglo in sparino (ISO 29461-2:2022)
Air intake filter systems for rotary machinery - Test methods - Part 2: Filter element
endurance test in fog and mist environments (ISO 29461-2:2022)
Ansaugfiltersysteme von Rotationsmaschinen - Prüfverfahren - Teil 2: Dauertest für
Filterelemente in Nebel- und Nebelumgebungen (ISO 29461-2:2022)
Systèmes de filtration d'air d'admission pour machines tournantes - Méthodes d'essai -
Partie 2: Essai d'endurance d'élément filtrant en brouillard et environnement brumeux
(ISO 29461-2:2022)
Ta slovenski standard je istoveten z: EN ISO 29461-2:2022
ICS:
29.160.99 Drugi standardi v zvezi z Other standards related to
rotacijskimi stroji rotating machinery
SIST EN ISO 29461-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 29461-2:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 29461-2:2022
EN ISO 29461-2
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2022
EUROPÄISCHE NORM
ICS 29.160.99
English Version
Air intake filter systems for rotary machinery - Test
methods - Part 2: Filter element endurance test in fog and
mist environments (ISO 29461-2:2022)
Systèmes de filtration d'air d'admission pour machines Ansaugfiltersysteme von Rotationsmaschinen -
tournantes - Méthodes d'essai - Partie 2: Essai Prüfverfahren - Teil 2: Dauertest für Filterelemente in
d'endurance d'élément filtrant en brouillard et Nebel- und Nebelumgebungen (ISO 29461-2:2022)
environnement brumeux (ISO 29461-2:2022)
This European Standard was approved by CEN on 24 June 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 29461-2:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 29461-2:2022
EN ISO 29461-2:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 29461-2:2022
EN ISO 29461-2:2022 (E)
European foreword
This document (EN ISO 29461-2:2022) has been prepared by Technical Committee ISO/TC 142
"Cleaning equipment for air and other gases" in collaboration with Technical Committee CEN/TC 195
“Cleaning equipment for air and other gases” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2023, and conflicting national standards shall
be withdrawn at the latest by March 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Ne
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.