iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13718-2:2015+A1:2020

(Main)

Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances

Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances

This part of EN 13718 specifies the requirements for performance and equipping for air ambulances, including requirements for interfaces to medical devices used for the transport and treatment of sick or injured persons. This part of EN 13718 is applicable to air ambulances capable of transporting at least one person on a stretcher.
NOTE   Requirements are specified for categories of air ambulances based on the different intended use. These are the helicopter emergency medical service (HEMS) the helicopter intensive care medical service (HICAMS) and the fixed wing air ambulance (FWAA).

Medizinische Fahrzeuge und ihre Ausrüstung - Luftfahrzeuge zum Patiententransport - Teil 2: Operationelle und technische Anforderungen an Luftfahrzeuge zum Patiententransport

Dieser Teil von EN 13718 legt die Anforderungen an die Leistung und Ausrüstung von Luftfahrzeugen zum Patiententransport fest, die für den Transport und die Behandlung kranker oder verletzter Personen eingesetzt werden; dies schließt Anforderungen an die Schnittstellen mit den Medizinprodukten (Geräten) ein. Dieser Teil von EN 13718 ist für Luftfahrzeuge zum Patiententransport anwendbar, die in der Lage sind, mindestens eine Person auf einer Krankentrage zu transportieren.
ANMERKUNG Die Anforderungen für Kategorien von Luftfahrzeugen zum Patiententransport werden auf der Grundlage der verschiedenen vorgesehenen Verwendungszwecke festgelegt. Bei diesen Kategorien handelt es sich um Rettungstransporthubschrauber (RTH) (en: helicopter emergency medical service (HEMS)), intensivmedizinische Hubschrauber (ITH) (en: helicopter intensive care medical service (HICAMS)) und Flächenflugzeuge zum Patiententransport (en: fixed wing air ambulance (FWAA)).

Véhicules sanitaires et leurs équipements - Ambulances aériennes - Partie 2 : Exigences opérationnelles et techniques pour les ambulances aérienness

N/A

Ambulantna vozila in njihova oprema - Ambulantna zračna vozila - 2. del: Operativne in tehnične zahteve za ambulantna zračna vozila

General Information

Status
Published
Publication Date
24-Mar-2020
Withdrawal Date
29-Sep-2020
ICS
11.040.01 - Medical equipment in general
11.160 - First aid
49.020 - Aircraft and space vehicles in general
Technical Committee
CEN/TC 239 - Rescue systems
Drafting Committee
CEN/TC 239 - Rescue systems
Current Stage
9060 - Closure of 2 Year Review Enquiry - Review Enquiry
Start Date
02-Dec-2021
Completion Date
02-Dec-2021
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
SIST EN 13718-2:2015+A1:2020 - Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances

Relations

Merged From
EN 13718-2:2015/FprA1 - Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
Effective Date
19-Jan-2023
Merged From
EN 13718-2:2015 - Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
Effective Date
09-Jan-2019

Buy Standard

EN 13718-2:2015+A1:2020EN 13718-2:2015+A1:2020
PreviousNext
Standard
EN 13718-2:2015+A1:2020
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13718-2:2015+A1:2020
01-maj-2020
Nadomešča:
SIST EN 13718-2:2015
Ambulantna vozila in njihova oprema - Ambulantna zračna vozila - 2. del:
Operativne in tehnične zahteve za ambulantna zračna vozila
Medical vehicles and their equipment - Air ambulances - Part 2: Operational and
technical requirements for air ambulances
Medizinische Fahrzeuge und ihre Ausrüstung - Luftfahrzeuge zum Patiententransport -
Teil 2: Operationelle und technische Anforderungen an Luftfahrzeuge zum
Patiententransport
Véhicules sanitaires et leurs équipements - Ambulances aériennes - Partie 2 : Exigences
opérationnelles et techniques pour les ambulances aérienness
Ta slovenski standard je istoveten z: EN 13718-2:2015+A1:2020
ICS:
11.040.01 Medicinska oprema na Medical equipment in general
splošno
11.160 Prva pomoč First aid
49.020 Letala in vesoljska vozila na Aircraft and space vehicles in
splošno general
SIST EN 13718-2:2015+A1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13718-2:2015+A1:2020

---------------------- Page: 2 ----------------------
SIST EN 13718-2:2015+A1:2020


EN 13718-2:2015+A1
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2020
EUROPÄISCHE NORM
ICS 11.040.01; 11.160; 49.020
English Version

Medical vehicles and their equipment - Air ambulances -
Part 2: Operational and technical requirements for air
ambulances
Véhicules sanitaires et leur équipement - Ambulances Medizinische Fahrzeuge und ihre Ausrüstung -
aériennes - Partie 2 : Exigences opérationnelles et Luftfahrzeuge zum Patiententransport - Teil 2:
techniques pour les ambulances aériennes Operationelle und technische Anforderungen an
Luftfahrzeuge zum Patiententransport
This European Standard was approved by CEN on 26 December 2014 and includes Amendment 1 approved by CEN on 16
December 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13718-2:2015+A1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13718-2:2015+A1:2020
EN 13718-2:2015+A1:2020 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 10
4 General requirements for air ambulances . 11
4.1 General . 11
4.2 Environmental conditions in the patient compartment . 12
4.2.1 Temperature and humidity . 12
4.2.2 Air conditioning system (ACS) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13718-1:2014+A1:2020(Main)
Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
SIST EN 13718-1:2015+A1:2020

This European Standard specifies general requirements for medical devices carried in air ambulances and used therein and outside hospitals and clinics in situations where the ambient conditions can differ from normal indoor conditions. This European Standard does not cover the requirements for approval and registration of the vehicle and the training of the staff which is the responsibility of the authority/authorities in the country where the ambulance is to be registered.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13718-2:2015/FprA1(Amendment)
Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
SIST EN 13718-2:2015/oprA1:2018

This part of EN 13718 specifies the requirements for performance and equipping for air ambulances, including requirements for interfaces to medical devices used for the transport and treatment of sick or injured persons. This part of EN 13718 is applicable to air ambulances capable of transporting at least one person on a stretcher.
NOTE   Requirements are specified for categories of air ambulances based on the different intended use. These are the helicopter emergency medical service (HEMS) the helicopter intensive care medical service (HICAMS) and the fixed wing air ambulance (FWAA).

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13718-1:2014/FprA1(Amendment)
Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
SIST EN 13718-1:2015/oprA1:2018

This European Standard specifies general requirements for medical devices carried in air ambulances and used therein and outside hospitals and clinics in situations where the ambient conditions can differ from normal indoor conditions. This European Standard does not cover the requirements for approval and registration of the vehicle and the training of the staff which is the responsibility of the authority/authorities in the country where the ambulance is to be registered.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13718-1:2014+A1:2020(Main)
Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
SIST EN 13718-1:2015+A1:2020

This European Standard specifies general requirements for medical devices carried in air ambulances and used therein and outside hospitals and clinics in situations where the ambient conditions can differ from normal indoor conditions. This European Standard does not cover the requirements for approval and registration of the vehicle and the training of the staff which is the responsibility of the authority/authorities in the country where the ambulance is to be registered.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13718-2:2015/FprA1(Amendment)
Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
SIST EN 13718-2:2015/oprA1:2018

This part of EN 13718 specifies the requirements for performance and equipping for air ambulances, including requirements for interfaces to medical devices used for the transport and treatment of sick or injured persons. This part of EN 13718 is applicable to air ambulances capable of transporting at least one person on a stretcher.
NOTE   Requirements are specified for categories of air ambulances based on the different intended use. These are the helicopter emergency medical service (HEMS) the helicopter intensive care medical service (HICAMS) and the fixed wing air ambulance (FWAA).

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13718-1:2014/FprA1(Amendment)
Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
SIST EN 13718-1:2015/oprA1:2018

This European Standard specifies general requirements for medical devices carried in air ambulances and used therein and outside hospitals and clinics in situations where the ambient conditions can differ from normal indoor conditions. This European Standard does not cover the requirements for approval and registration of the vehicle and the training of the staff which is the responsibility of the authority/authorities in the country where the ambulance is to be registered.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 683-2:2024(Main)
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties
kSIST FprEN 683-2:2024

This document specifies the mechanical properties of wrought aluminium and wrought aluminium alloy finstock.
The chemical composition limits of these materials are specified in EN 573 3, unless otherwise agreed between supplier and purchaser.
The designations of wrought aluminium and wrought aluminium alloys and the temper designations used in this document are specified in EN 573 3, and the temper designations are defined in EN 515.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day