Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)

ISO 8254-2:2016 specifies a photometric test method for the assessment of visual gloss by means of a reflectometer value measured at an angle of 75°. It is applicable to plane paper and board surfaces of gloss levels below 65, measured according to ISO 8254-2:2016. It should be the preferred method for paper and board surfaces of gloss levels below 20, measured according to ISO 8254-2:2016. Materials containing optical brightening agents may be measured.

Papier und Pappe - Bestimmung des Glanzes - Teil 2: Messung mit einem parallelen Strahl bei 75°, DIN-Verfahren (ISO 8254-2:2016)

Dieser Teil der ISO 8254 legt ein photometrisches Prüfverfahren zur Bewertung des Glanzes mithilfe eines Reflektometerwertes fest, der bei einem Winkel von 75° gemessen wird. Er gilt für ebene Papier  und Pappenoberflächen mit einem nach diesem Teil der ISO 8254 ermittelten Glanzwert von unter 65. Sie sollte für Papier  und Pappenoberflächen mit nach diesem Teil der ISO 8254 ermittelten Glanzwerten von unter 20 das bevorzugte Verfahren darstellen. Materialien, die optisch aufhellende Bestandteile enthalten, dürfen gemessen werden.

Papiers et cartons - Mesurage du brillant spéculaire - Partie 2: Brillant à 75 degrés avec un faisceau parallèle, méthode DIN (ISO 8254-2:2016)

L'ISO 8254-2 :2016 spécifie une méthode d'essai photométrique pour l'évaluation du brillant visuel à l'aide d'une valeur réflectométrique mesurée suivant un angle de 75°. Elle est applicable aux papiers et cartons dont la surface est plane et présente un niveau de brillant, mesuré selon l'ISO 8254-2 :2016, inférieur à 65. Il convient de préférer cette méthode pour les papiers et cartons dont la surface présente un niveau de brillant, mesuré selon l'ISO 8254-2 :2016, inférieur à 20. Les matériaux contenant des agents d'azurage optique peuvent être mesurés.

Papir, karton in lepenka - Merjenje zrcalnega sijaja - 2. del: 75-stopinjski sijaj z vzporednim snopom svetlobe, metoda po DIN (ISO 8254-2:2016)

Ta del standarda ISO 8254 določa fotometrične preskusne metode za oceno vizualnega sijaja s pomočjo reflektometrske vrednosti, izmerjene pod kotom 75°. Uporablja se za površine navadnega papirja in kartona z ravnmi sijaja pod 65, izmerjenimi v skladu s tem delom standarda ISO 8254. To je priporočljiva metoda za navadni papir in karton z ravnmi sijaja pod 20, izmerjenimi v skladu s tem delom standarda ISO 8254. Lahko se merijo materiali, ki vsebujejo optična belilna sredstva.

General Information

Status
Published
Publication Date
26-Jul-2016
Withdrawal Date
30-Jan-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
27-Jul-2016
Completion Date
27-Jul-2016

Relations

Buy Standard

Standard
EN ISO 8254-2:2016
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8254-2:2016
01-november-2016
1DGRPHãþD
SIST EN ISO 8254-2:2003
Papir, karton in lepenka - Merjenje zrcalnega sijaja - 2. del: 75-stopinjski sijaj z
vzporednim snopom svetlobe, metoda po DIN (ISO 8254-2:2016)
Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a
parallel beam, DIN method (ISO 8254-2:2016)
Papier und Pappe - Bestimmung des Glanzes - Teil 2: Messung mit einem parallelen
Strahl bei 75°, DIN-Verfahren (ISO 8254-2:2016)
Papiers et cartons - Mesurage du brillant spéculaire - Partie 2: Brillant à 75 degrés avec
un faisceau parallèle, méthode DIN (ISO 8254-2:2016)
Ta slovenski standard je istoveten z: EN ISO 8254-2:2016
ICS:
85.060 Papir, karton in lepenka Paper and board
SIST EN ISO 8254-2:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8254-2:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 8254-2:2016


EN ISO 8254-2
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2016
EUROPÄISCHE NORM
ICS 85.060 Supersedes EN ISO 8254-2:2003
English Version

Paper and board - Measurement of specular gloss - Part 2:
75 degree gloss with a parallel beam, DIN method (ISO
8254-2:2016)
Papiers et cartons - Mesurage du brillant spéculaire - Papier und Pappe - Bestimmung des Glanzes - Teil 2:
Partie 2: Brillant à 75 degrés avec un faisceau parallèle, Messung mit einem parallelen Strahl bei 75°, DIN-
méthode DIN (ISO 8254-2:2016) Verfahren (ISO 8254-2:2016)
This European Standard was approved by CEN on 19 May 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8254-2:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8254-2:2016
EN ISO 8254-2:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8254-2:2016
EN ISO 8254-2:2016 (E)
European foreword
This document (EN ISO 8254-2:2016) has been prepared by Technical Committee ISO/TC 6 “Paper,
board and pulps” in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2017, and conflicting national standards shall
be withdrawn at the latest by January 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 8254-2:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8254-2:2016 has been approved by CEN as EN ISO 8254-2:2016 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 8254-2:2016

-------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.