iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 9455-14:2017

(Main)

Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-14:2017)

Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-14:2017)

ISO 9455-14:2017 specifies a qualitative method for the assessment of the tackiness of the residues of a soft soldering flux after a soldering process. The method is applicable to all fluxes, solder pastes and flux cored solder wires. The method is particularly appropriate for applications where flux residues are left in situ on electrical and electronic equipment.

Flußmittel zum Weichlöten - Prüfverfahren; Teil 14: Bestimmung des Haftvermögens von Flußmittelrückständen (ISO 9455-14:2017)

Flux de brasage tendre - Méthodes d'essai - Partie 14: Détermination du pouvoir collant des résidus de flux (ISO 9455-14:2017)

ISO 9455-14:2017 spécifie une méthode quantitative d'évaluation du pouvoir collants des résidus de flux de brasage tendre après brasage. La méthode est applicable à tous les flux, aux pâtes de brasage et aux fils à flux incorporé. La méthode est particulièrement appropriée aux applications pour lesquelles les flux sont laissés in situ sur les équipements électriques et électroniques.

Talila za mehko spajkanje - Preskusne metode - 14. del: Ocena adhezivnosti ostankov talila (ISO 9455-14:2017)

Ta dokument določa kvalitativno metodo za ocenjevanje oprijemljivosti ostankov talila za mehko spajkanje po postopku spajkanja. Metoda se uporablja za vsa talila, spajkalne paste in mehke spajke v obliki strženske žice. Metoda je posebej primerna v primerih, ko se ostanki talila nabirajo na električni in elektronski opremi.

General Information

Status
Published
Publication Date
19-Sep-2017
Withdrawal Date
30-Mar-2018
ICS
25.160.50 - Brazing and soldering
Technical Committee
CEN/TC 121 - Welding
Drafting Committee
CEN/TC 121 - Welding
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
20-Sep-2017
Completion Date
20-Sep-2017
Ref Project
SIST EN ISO 9455-14:2018 - Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-14:2017)

Relations

Replaces
EN 29455-14:1993 - Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-14:1991)
Effective Date
27-Sep-2017

Buy Standard

EN ISO 9455-14:2018EN ISO 9455-14:2018
PreviousNext
Standard
EN ISO 9455-14:2018
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9455-14:2018
01-februar-2018
1DGRPHãþD
SIST EN 29455-14:1998
Talila za mehko spajkanje - Preskusne metode - 14. del: Ocena adhezivnosti
ostankov talila (ISO 9455-14:2017)
Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues
(ISO 9455-14:2017)
Flußmittel zum Weichlöten - Prüfverfahren; Teil 14: Bestimmung des Haftvermögens von
Flußmittelrückständen (ISO 9455-14:2017)
Flux de brasage tendre - Méthodes d'essai - Partie 14: Détermination du pouvoir collant
des résidus de flux (ISO 9455-14:2017)
Ta slovenski standard je istoveten z: EN ISO 9455-14:2017
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9455-14:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9455-14:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 9455-14:2018


EN ISO 9455-14
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2017
EUROPÄISCHE NORM
ICS 25.160.50 Supersedes EN 29455-14:1993
English Version

Soft soldering fluxes - Test methods - Part 14: Assessment
of tackiness of flux residues (ISO 9455-14:2017)
Flux de brasage tendre - Méthodes d'essai - Partie 14: Flußmittel zum Weichlöten - Prüfverfahren; Teil 14:
Détermination du pouvoir collant des résidus de flux Bestimmung des Haftvermögens von
(ISO 9455-14:2017) Flußmittelrückständen (ISO 9455-14:2017)
This European Standard was approved by CEN on 12 September 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-14:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9455-14:2018
EN ISO 9455-14:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 9455-14:2018
EN ISO 9455-14:2017 (E)
European foreword
This document (EN ISO 9455-14:2017) has been prepared by Technical Committee ISO/TC 44 “Welding
and allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2018, and conflicting national standards shall
be withdrawn at the latest by March 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 29455-14:1993.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9455-14:2017 has been approved by CEN as EN ISO 9455-14:2017 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 9455-14:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 9
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 9455-17:2024(Main)
Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2024)
SIST EN ISO 9455-17:2024

This document specifies a method of testing for deleterious effects that can arise from flux residues after soldering or tinning test coupons. The test is applicable to type 1 and type 2 fluxes, as specified in ISO 9454-1, in solid or liquid form, or in the form of flux-cored solder wire, solder preforms or solder paste constituted with eutectic or near-eutectic tin/lead (Sn/Pb) or Sn95,5Ag3Cu0,5 or other lead-free solders as agreed between user and supplier (see ISO 9453).
This test method is also applicable to fluxes for use with lead-containing and lead-free solders. However, the soldering temperatures can be adjusted with agreement between tester and customer.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18279:2023(Main)
Brazing - Imperfections in brazed joints (ISO 18279:2023)
SIST EN ISO 18279:2024

This document details a classification of imperfections that can occur in brazing joints. In addition, guidance is provided on quality levels and suggested limits for imperfections are detailed.
For requirements not covered by this document, reference can be made to other sources, such as statutory regulations, codes of practice and technical delivery conditions.
No information is given on how imperfections are to be assessed in individual cases because this depends on the requirements for the particular brazed joint. These imperfections are not always detectable by the use of non-destructive testing alone.
This document covers only imperfections that can occur in connection with brazing without the effect of any additional service loads. Only the type, shape and position of such imperfections are covered; no indication is given of the conditions of occurrence or causes.
For requirements for brazed joints which are relevant and essential to the particular function of the component, reference can be made to the relevant documentation, for example manufacturing documents or procedure sheets.
It is important that these requirements be precisely prescribed and that conformity with them be verifiable. Conformity can be established by testing either the brazed assembly itself or a test piece produced under comparable conditions.
This document does not specify requirements for acceptance levels for imperfections, since these will differ very markedly depending on the application, but it does suggest some quality levels which can be of value in the absence of more detailed information.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 5179:2023(Main)
Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021)
SIST EN ISO 5179:2023

This document specifies three test methods for investigating brazeability.
A spreading test shows testing method with measurement of the spread area of the filler metals.
A T-joint test describes a scheme to construct a T-shape design by the test pieces and a testing method.
A varying gap test describes a test piece and a testing method for assessing the influence of the various parameters which can influence brazing during manufacture as a function of clearances.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9455-6:2022(Main)
Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:2022)
SIST EN ISO 9455-6:2023

This document specifies three quantitative methods for the determination of the ionic halide (excluding fluoride) content of soldering fluxes. Halides are calculated as chlorides. A useful qualitative test method for the detection of ionic halides is also described.
Method A is a potentiometric titration method for the determination of halide (excluding fluoride) content and is applicable to flux classes 1 and 2, defined in ISO 9454-1. This method, which is considered the reference method for these fluxes, is suitable for halide contents generally within the range of 0,05 % mass fraction to 2 % mass fraction in the non-volatile matter of the flux.
Method B is a titration method for the determination of the total halide (excluding fluoride) content of water-soluble fluxes. It is applicable to flux classes 2122 to 2124, 3112 to 3114 and 3212 to 3214, as defined in ISO 9454-1.
Method C is a titration method for the determination of the halide (excluding fluoride) content of water-soluble fluxes containing phosphates and is applicable to flux class 331, as defined in ISO 9454-1.
Method D is a qualitative test, using silver chromate test paper, for the presence of ionic halides. The technique can be used for all classes of flux.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9455-1:2022(Main)
Soft soldering fluxes - Test methods - Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:2022)
SIST EN ISO 9455-1:2023

This document specifies a gravimetric method for the determination of the content of non-volatile matter in soft soldering fluxes. It is applicable to liquid and paste fluxes of type 1, as defined in ISO 9454-1.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18496:2021(Main)
Brazing - Fluxes for brazing - Classification and technical delivery conditions (ISO 18496:2020)
SIST EN ISO 18496:2022

This document specifies the classification of fluxes used for brazing metals and characterizes these fluxes on the basis of their properties and use, and gives technical delivery conditions and health and safety precautions.
This document covers two classes of flux, FH and FL. Class FH is used for the brazing of heavy metals (steels, stainless steels, copper and its alloys, nickel and its alloys, precious metals, molybdenum and tungsten). Class FL is used for the brazing of aluminium and its alloys.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9455-9:2020(Main)
Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:2020)
SIST EN ISO 9455-9:2020

This document specifies a distillation method for the determination of the ammonia content of solid, paste or liquid fluxes. The method is applicable to fluxes of class 311 and 321 only, as defined in ISO 9454‑1.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9454-2:2020(Main)
Soft soldering fluxes - Classification and requirements - Part 2: Performance requirements (ISO 9454-2:2020)
SIST EN ISO 9454-2:2020

This document specifies the performance requirements for fluxes in solid, liquid and paste forms intended for use with soft solders.
NOTE 1    ISO 9454‑1 specifies the requirements for labelling and packaging as well as the coding system for the classification of the fluxes.
NOTE 2    Some of the fluxes intended for inert gas and vapour phase soldering may not pass some of the criteria in Tables 1 and 2.
Requirements for these fluxes are agreed between the purchaser and the supplier.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9455-5:2020(Main)
Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2020)
SIST EN ISO 9455-5:2020

This document specifies a qualitative method for assessing the aggressiveness of a flux towards copper.
The test is applicable to all fluxes of type 1 as defined in ISO 9454‑1.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9453:2020(Main)
Soft solder alloys - Chemical compositions and forms (ISO 9453:2020)
SIST EN ISO 9453:2020

This document specifies the requirements for chemical composition for soft solder alloys containing two or more of: tin, lead, antimony, copper, silver, bismuth, zinc, indium and/or cadmium.
An indication of the forms generally available is also included.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day