EN 13200-6:2020

Spectator facilities - Part 6: Demountable stands

This document specifies product characteristics for demountable stands at permanent or temporary entertainment venues, sports stadiums, sport halls and indoor and outdoor facilities. This document is not applicable to stands of a moveable type where last row of places for spectators is under 1 m height from the ground.
NOTE   It is recalled the attention to the fact that demountable stands used in Fairground and amusement park machinery and structures - Safety are covered by EN 13814:2004.

Zuschaueranlagen - Teil 6: Demontierbare Tribünen

Dieses Dokument legt Produktmerkmale von demontierbaren Tribünen an dauerhaften oder zeitlich befristeten Veranstaltungsorten, Sportstadien, Sporthallen und Anlagen in Gebäuden oder im Freien, fest. Dieses Dokument ist nicht auf ortsveränderliche Anlagen anwendbar, deren letzte Zuschauerreihe sich weniger als 1 m über dem Boden befindet.
ANMERKUNG   Es wird daran erinnert, dass demontierbare Tribünen, die in "Fliegende Bauten und Anlagen für Veranstaltungsplätze und Vergnügungsparks - Sicherheit" verwendet werden, durch EN 13814:2004 abgedeckt sind.

Installations pour spectateurs - Partie 6 : Tribunes démontables

Le présent document spécifie les caractéristiques des produits pour les tribunes démontables des lieux de divertissement permanents ou temporaires, des stades de sport et des salles de sport ainsi que des installations intérieures et extérieures. Le présent document ne s’applique pas aux tribunes de type mobile dont la dernière rangée de places destinées aux spectateurs est située à moins de 1 m de hauteur par rapport au sol.
NOTE   Il est rappelé que les tribunes démontables utilisées dans Machines et structures pour fêtes foraines et parcs d’attraction - Sécurité sont couvertes par l’EN 13814:2004.

Prostori za gledalce - 6. del: Razstavljive tribune

General Information

• Status: Published
• Publication Date: 15-Sep-2020
• Withdrawal Date: 30-Mar-2021
• ICS: 97.200.10 - Theatre, stage and studio equipment
• ICS: 97.220.10 - Sports facilities
• Technical Committee: CEN/TC 315 - Spectator facilities
• Drafting Committee: CEN/TC 315/WG 2 - Products
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 16-Sep-2020
• Due Date: 16-Mar-2019
• Completion Date: 16-Sep-2020
• Ref Project: SIST EN 13200-6:2020 - Spectator facilities - Part 6: Demountable stands

Relations

• Replaces: EN 13200-6:2012 - Spectator facilities - Part 6 : Demountable (temporary) stands
• Effective Date: 09-Sep-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13200-6:2020
01-november-2020
Nadomešča:
SIST EN 13200-6:2013
Prostori za gledalce - 6. del: Razstavljive tribune
Spectator facilities - Part 6: Demountable stands
Zuschaueranlagen - Teil 6: Demontierbare Tribünen
Installations pour spectateurs - Partie 6 : Tribunes démontables
Ta slovenski standard je istoveten z: EN 13200-6:2020
ICS:
91.040.10 Javne stavbe Public buildings
97.200.10 Gledališka, odrska in Theatre, stage and studio
studijska oprema ter delovne equipment
postaje
97.220.10 Športni objekti Sports facilities
SIST EN 13200-6:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13200-6:2020

---------------------- Page: 2 ----------------------
SIST EN 13200-6:2020


EN 13200-6
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2020
EUROPÄISCHE NORM
ICS 97.200.10; 97.220.10 Supersedes EN 13200-6:2012
English Version

Spectator facilities - Part 6: Demountable stands
Installations pour spectateurs - Partie 6 : Tribunes Zuschaueranlagen - Teil 6: Demontierbare Tribünen
démontables
This European Standard was approved by CEN on 15 June 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13200-6:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13200-6:2020
EN 13200-6:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Manufacture . 7
4.1 General . 7
4.2 Materials . 7
4.3 Inspection . 7
5 Design . 7
5.1 Basic design requirements . 7
5.2 Sightlines . 8
5.3 Basic specification . 8
5.3.1 General
...