iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 15858

(Main)

UV-C Devices - Safety information - Permissible human exposure (ISO/DIS 15858:2024)

UV-C Devices - Safety information - Permissible human exposure (ISO/DIS 15858:2024)

ISO 15858:2016 specifies minimum human safety requirements for the use of UVC lamp devices.
It is applicable to in-duct UVC systems, upper-air in room UVC systems, portable in-room disinfection UVC devices, and any other UVC devices which may cause UVC exposure to humans.
It is not applicable to UVC products used for water disinfection.

UV-C-Einrichtungen - Sicherheitsinformationen - Zulässige Exposition von Personen (ISO/DIS 15858:2024)

Dieses Dokument legt ein Vor-Ort-Bewertungsverfahren für die Sicherheit der von Anwendungen mit UV-C-Desinfektionssystemen und -geräten mit einer Wellenlänge zwischen 180 nm und 280 nm ausgehenden optischen Strahlung fest.
Dieses Dokument gilt für (teilweise) offene UV-C-Systeme in Luftleitungen, UV-C-Systeme zur Desinfektion des oberen Luftbereichs, tragbare UV-C-Einrichtungen zur Desinfektion in Innenräumen und für alle anderen UV-C-Einrichtungen, die eine UV-C-Exposition für Menschen verursachen können.
Dieses Dokument gilt nicht für vollständig geschlossene UV-C-Einrichtungen, UV-C-Systeme, die an Orten mit kontrolliertem Zugang verwendet werden, und UV-C-Einrichtungen, die zur Wasserdesinfektion verwendet werden.

Dispositifs UV-C - Information sur la sécurité - Limites admissibles pour l'exposition humaine (ISO/DIS 15858:2024)

L'ISO 15858 :2016 spécifie les prescriptions minimales de sécurité des personnes s'appliquant à l'utilisation des lampes UVC.
Elle est applicable aux systèmes UVC en conduit, aux systèmes UVC d'air supérieur, aux dispositifs UVC de désinfection portables et à tout autre dispositif UVC pouvant entraîner une exposition des personnes aux UVC.
Elle n'est pas applicable aux produits UVC utilisés pour la désinfection de l'eau.

UV-C-naprave - Varnostne zahteve - Dovoljena izpostavljenost ljudi (ISO/DIS 15858:2024)

General Information

Status
Not Published
Publication Date
24-Aug-2025
ICS
91.140.30 - Ventilation and air-conditioning systems
Technical Committee
CEN/TC 195 - Air filters for general air cleaning
Drafting Committee
CEN/TC 195 - Air filters for general air cleaning
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
18-Apr-2024
Completion Date
18-Apr-2024
Ref Project
oSIST prEN ISO 15858:2024 - UV-C Devices - Safety information - Permissible human exposure (ISO/DIS 15858:2024)

Relations

Revises
EN ISO 15858:2016 - UV-C Devices - Safety information - Permissible human exposure (ISO 15858:2016)
Effective Date
18-May-2022

Buy Standard

prEN ISO 15858:2024prEN ISO 15858:2024
PreviousNext
Draft
prEN ISO 15858:2024
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 15858:2024
01-marec-2024
UV-C-naprave - Varnostne zahteve - Dovoljena izpostavljenost ljudi (ISO/DIS
15858:2024)
UV-C Devices - Safety information - Permissible human exposure (ISO/DIS 15858:2024)
UV-C-Einrichtungen - Sicherheitsinformationen - Zulässige Exposition von Personen
(ISO/DIS 15858:2024)
Dispositifs UV-C - Information sur la sécurité - Limites admissibles pour l'exposition
humaine (ISO/DIS 15858:2024)
Ta slovenski standard je istoveten z: prEN ISO 15858
ICS:
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
oSIST prEN ISO 15858:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 15858:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 15858:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15858
ISO/TC 142 Secretariat: UNI
Voting begins on: Voting terminates on:
2024-01-25 2024-04-18
UV-C Devices — Safety information — Permissible human
exposure
Dispositifs UV-C — Information sur la sécurité — Limites admissibles pour l'exposition humaine
ICS: 91.140.30
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 15858:2024(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2024

---------------------- Page: 3 ----------------------
oSIST prEN ISO 15858:2024
ISO/DIS 15858:2024(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 15858
ISO/TC 142 Secretariat: UNI
Voting begins on: Voting terminates on:

UV-C Devices — Safety information — Permissible human
exposure
Dispositifs UV-C — Information sur la sécurité — Limites admissibles pour l'exposition humaine
ICS: 91.140.30
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2024
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 15858:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2024 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 15858:2024
ISO/DIS 15858:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definition
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 10121-3:2022(Main)
Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation - Part 3: Classification system for GPACDs applied to treatment of outdoor air (ISO 10121-3:2022)
SIST EN ISO 10121-3:2023

This document establishes a classification system for GPACDs supplying single pass outdoor air to general ventilation systems using outdoor air polluted by local urban sources and/or long-distance pollution. The classification system is intended to aid in assessing molecular contamination in addition to the particulate contamination dealt with by ISO 16890-1.
This document specifies four reference pollutants, i.e. ozone, sulphur dioxide, nitrogen dioxide and toluene, used for the classification due to their relevance to the intended application. This document further specifies three duty levels that are assigned for each pollutant reflecting the typical performance range of devices intended for the application. Since selection of reference pollutants and duty levels are specific and unique to the intended application, all other applications are excluded. In particular, this document does not apply to GPACDs in recirculation applications and/or dealing with pollution from indoor sources as well as pharmaceutical, microelectronic, nuclear, homeland security and military applications.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16890-4:2022(Main)
Air filters for general ventilation - Part 4: Conditioning method to determine the minimum fractional test efficiency (ISO 16890-4:2022)
SIST EN ISO 16890-4:2022

This document establishes a conditioning method to determine the minimum fractional test efficiency.
It is intended to be used in conjunction with ISO 16890‑1, ISO 16890‑2 and ISO 16890‑3, and provides the related test requirements for the test device and conditioning cabinet as well as the conditioning procedure to follow.
The conditioning method described in this document is referring to a test device with a nominal face area of 610 mm × 610 mm (24 inches × 24 inches).
This document refers to particulate air filter elements for general ventilation having an ePM1 efficiency less than or equal to 99 % and an ePM10 efficiency greater than 20 % when tested according to the procedures defined within the ISO 16890 series.
NOTE      The lower limit for this test procedure is set at a minimum ePM10 efficiency of 20 % since it will be very difficult for a test filter element below this level to meet the statistical validity requirements of this procedure.
Filter elements used in portable room-air cleaners are excluded from the scope of this document.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16890-2:2022(Main)
Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2022)
SIST EN ISO 16890-2:2022

This document specifies the aerosol production, the test equipment and the test methods used for measuring fractional efficiency and air flow resistance of air filters for general ventilation.
It is intended to be used in conjunction with ISO 16890‑1, ISO 16890‑3 and ISO 16890‑4.
The test method described in this document is applicable for air flow rates between 0,25 m3/s (900 m3/h, 530 ft3/min) and 1,5 m3/s (5 400 m3/h, 3 178 ft3/min), referring to a test rig with a nominal face area of 610 mm × 610 mm (24.0 inches × 24.0 inches).
This document refers to particulate air filter elements for general ventilation having an ePM1 efficiency less than or equal to 99 % and an ePM10 efficiency greater than 20 % when tested as per the procedures defined within the ISO 16890 series.
NOTE      The lower limit for this test procedure is set at a minimum ePM10 efficiency of 20 % since it is very difficult for a test filter element below this level to meet the statistical validity requirements of this procedure.
This document is not applicable to filter elements used in portable room-air cleaners.

  • Standard
    71 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 29462:2022(Main)
Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow (ISO 29462:2022)
SIST EN ISO 29462:2022

This document describes a procedure for measuring the performance of general ventilation air cleaning devices in their end use installed configuration. The performance measurements include removal efficiency by particle size and the resistance to airflow. The test procedures include the definition and reporting of the system airflow.
The procedure describes a method of counting ambient air particles of 0,3 μm to 5,0 μm upstream and downstream of the in-place air cleaner(s) in a functioning air handling system. The procedure describes the reduction of particle counter data to calculate removal efficiency by particle size.
Since filter installations vary dramatically in design and shape, a protocol for evaluating the suitability of a site for filter evaluation and for system evaluation is included. When the evaluated site conditions meet the minimum criteria established for system evaluation, the performance evaluation of the system can also be performed according to this procedure.
This document also describes performance specifications for the testing equipment and defines procedures for calculating and reporting the results. This document is not intended for measuring performance of portable or movable room air cleaners or for evaluation of filter installations with an expected filtration efficiency at or above 99 % or at or below 30 % when measured at 0,4 μm.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 29463-5:2022(Main)
High-efficiency filters and filter media for removing particles in air - Part 5: Test method for filter elements (ISO 29463-5:2022)
SIST EN ISO 29463-5:2022

This document specifies the test methods for determining the efficiency of filters at their most penetrating particle size (MPPS). It also gives guidelines for the testing and classification for filters with an MPPS of less than 0,1 μm (Annex B) and filters using media with (charged) synthetic fibres (Annex C). It is intended for use in conjunction with ISO 29463‑1, ISO 29463‑2, ISO 29463‑3 and ISO 29463‑4.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15805:2021(Main)
Particulate air filters for general ventilation - Standardised dimensions
SIST EN 15805:2022

This document specifies the header frame dimensions of air filters for general ventilation to be used in air handling units, air intake system filters for rotary machinery and other applications. This includes pocket filters, rigid (V type) filters and filters to which header frame dimensions are applicable.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 29464:2019(Main)
Cleaning of air and other gases - Terminology (ISO 29464:2017)
SIST EN ISO 29464:2019

ISO 29464:2017 establishes a terminology for the air filtration industry and comprises terms and definitions only.
ISO 29464:2017 is applicable to particulate and gas phase air filters and air cleaners used for the general ventilation of inhabited enclosed spaces. It is also applicable to air inlet filters for static or seaborne rotary machines and UV-C germicidal devices.
It is not applicable to cabin filters for road vehicles or air inlet filters for mobile internal combustion engines for which separate arrangements exist. Dust separators for the purpose of air pollution control are also excluded.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 21083-2:2019(Main)
Test method to measure the efficiency of air filtration media against spherical nanomaterials - Part 2: Size range from 3 nm to 30 nm (ISO/TS 21083-2:2019)
SIST-TS CEN ISO/TS 21083-2:2019

This document specifies the testing instruments and procedure for determining the filtration efficiencies of flat sheet filter media against airborne nanoparticles in the range of 3 nm to 30 nm. The testing methods in this document are limited to spherical or nearly-spherical particles to avoid uncertainties due to the particle shape.

  • Technical specification
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21083-1:2018(Main)
Test method to measure the efficiency of air filtration media against spherical nanomaterials - Part 1: Size range from 20 nm to 500 nm (ISO 21083-1:2018)
SIST EN ISO 21083-1:2019

This document specifies the testing instruments and procedure for determining the fractional filtration efficiencies of flat sheet filter medium against airborne nanoparticles in the range of 20 nm to 500 nm. The testing methods in this document are limited to spherical or nearly-spherical particles to avoid uncertainties due to the particle shape.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 29463-3:2018(Main)
High-efficiency filters and filter media for removing particles in air - Part 3: Testing flat sheet filter media (ISO 29463-3:2011)
SIST EN ISO 29463-3:2018

ISO 29463-3:2011 specifies the test procedure for testing the efficiency of flat sheet filter media. It is intended for use in conjunction with ISO 29463-1, ISO 29463-2, ISO 29463-4 and ISO 29463-5.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day