EN ISO 8254-2:2003

Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2003)

ISO 8254-2:2003 specifies a photometric test method for the assessment of visual gloss by means of a reflectometer value measured at an angle of 75 degrees. It is applicable to plane paper and board surfaces of low gloss, commonly called matt papers and boards having reflectance values, measured according to ISO 8254-2:2003, between 0 and approximately 20. Materials containing optical brightening agents may be measured.
RTF report excerpt
! RTF: element uses bad font `MSTT31C5DB00´ with content ...red at an angle of 7'5 degrees'. It is applicable t...

Papier und Pappe - Bestimmung des Glanzes - Teil 2: Messung mit einem parallelen Strahl bei 75°, DIN-Verfahren (ISO 8254-2:2003)

Papiers et cartons - Mesurage du brillant spéculaire - Partie 2: Brillant à 75° avec un faisceau parallèle, méthode DIN (ISO 8254-2:2003)

La présente Norme européenne spécifie une méthode d'essai photométrique pour l'évaluation du brillant visuel à l'aide d'une valeur réflectométrique mesurée sous un angle de 75°. Elle s'applique aux surfaces planes de papiers et de cartons de brillant, mesuré à l'aide de la présente Norme européenne, inférieur à 65. Il convient de préconiser cette méthode pour les papiers et cartons dont la surface présente un niveau de brillant, mesuré à l'aide de la présente Norme européenne, inférieur à 20. Elle permet de mesurer des matériaux renfermant des matériaux de brillance optique.

Papir, karton in lepenka –Merjenje zrcalnega sijaja – 1. del: 75-stopinjski sijaj z vzporednim snopom svetlobe, metoda po DIN (ISO 8254-1:2003)

General Information

• Status: Withdrawn
• Publication Date: 14-Jan-2003
• Withdrawal Date: 26-Jul-2016
• ICS: 85.060 - Paper and board
• Technical Committee: CEN/TC 172 - Pulp, paper and board
• Drafting Committee: CEN/TC 172/WG 9 - Gloss assessment
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-Jul-2016
• Ref Project: SIST EN ISO 8254-2:2003 - Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2003)

Relations

• Replaced By: EN ISO 8254-2:2016 - Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8254-2:2003
01-september-2003
Papir, karton in lepenka –Merjenje zrcalnega sijaja – 1. del: 75-stopinjski sijaj z
vzporednim snopom svetlobe, metoda po DIN (ISO 8254-1:2003)
Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel
beam, DIN method (ISO 8254-2:2003)
Papier und Pappe - Bestimmung des Glanzes - Teil 2: Messung mit einem parallelen
Strahl bei 75°, DIN-Verfahren (ISO 8254-2:2003)
Papiers et cartons - Mesurage du brillant spéculaire - Partie 2: Brillant a 75° avec un
faisceau parallele, méthode DIN (ISO 8254-2:2003)
Ta slovenski standard je istoveten z: EN ISO 8254-2:2003
ICS:
85.060 Papir, karton in lepenka Paper and board
SIST EN ISO 8254-2:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8254-2:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 8254-2:2003
EUROPEAN STANDARD
EN ISO 8254-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2003
ICS 85.060
English version
Paper and board - Measurement of specular gloss - Part 2: 75°
gloss with a parallel beam, DIN method (ISO 8254-2:2003)
Papiers et cartons - Mesurage du brillant spéculaire - Partie Papier und Pappe - Bestimmung des Glanzes - Teil 2:
2: Brillant à 75° avec un faisceau parallèle, méthode DIN Messung mit einem parallelen Strahl bei 75°, DIN-
(ISO 8254-2:2003) Verfahren (ISO 8254-2:2003)
This European Standard was approved by CEN on 9 September 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8254-2:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8254-2:2003
EN ISO 8254-2:2003 (E)
Contents
Foreword.3
Introduction .4
1 Scope .4
2 Normative references .4
3 Terms and definitions.5
4 Principle.5
5 Equipment.5
5.1 Reflectometer .5
5.2 Gloss standards.5
5.2.1 Zero-gloss standards .6
5.2.2 Primary gloss standards.6
5.2.3 Working standards .6
5.2.4 Intermediate gloss standards.
...